From: Alex Bee <knaerzche@gmail.com>
To: Sandy Huang <hjc@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Alex Bee <knaerzche@gmail.com>
Subject: [PATCH v3 3/5] drm: rockchip: add missing registers for RK3066
Date: Fri, 28 May 2021 15:05:52 +0200 [thread overview]
Message-ID: <20210528130554.72191-4-knaerzche@gmail.com> (raw)
In-Reply-To: <20210528130554.72191-1-knaerzche@gmail.com>
Add dither_up, dsp_lut_en and data_blank registers to enable their
respective functionality for RK3066's VOP.
While at that also fix .rb_swap and .format registers for all windows,
which have to be set though RK3066_SYS_CTRL1 register.
Also remove .scl from win1: Scaling is only supported on the primary
plane.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
Changes in v3:
- added patch
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index 2aa6d937a078..b7c51933729f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -355,8 +355,8 @@ static const struct vop_win_phy rk3066_win0_data = {
.nformats = ARRAY_SIZE(formats_win_full),
.format_modifiers = format_modifiers_win_full,
.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 0),
- .format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 4),
- .rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 19),
+ .format = VOP_REG(RK3066_SYS_CTRL1, 0x7, 4),
+ .rb_swap = VOP_REG(RK3066_SYS_CTRL1, 0x1, 19),
.act_info = VOP_REG(RK3066_WIN0_ACT_INFO, 0x1fff1fff, 0),
.dsp_info = VOP_REG(RK3066_WIN0_DSP_INFO, 0x0fff0fff, 0),
.dsp_st = VOP_REG(RK3066_WIN0_DSP_ST, 0x1fff1fff, 0),
@@ -367,13 +367,12 @@ static const struct vop_win_phy rk3066_win0_data = {
};
static const struct vop_win_phy rk3066_win1_data = {
- .scl = &rk3066_win_scl,
.data_formats = formats_win_full,
.nformats = ARRAY_SIZE(formats_win_full),
.format_modifiers = format_modifiers_win_full,
.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 1),
- .format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 7),
- .rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 23),
+ .format = VOP_REG(RK3066_SYS_CTRL1, 0x7, 7),
+ .rb_swap = VOP_REG(RK3066_SYS_CTRL1, 0x1, 23),
.act_info = VOP_REG(RK3066_WIN1_ACT_INFO, 0x1fff1fff, 0),
.dsp_info = VOP_REG(RK3066_WIN1_DSP_INFO, 0x0fff0fff, 0),
.dsp_st = VOP_REG(RK3066_WIN1_DSP_ST, 0x1fff1fff, 0),
@@ -388,8 +387,8 @@ static const struct vop_win_phy rk3066_win2_data = {
.nformats = ARRAY_SIZE(formats_win_lite),
.format_modifiers = format_modifiers_win_lite,
.enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 2),
- .format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 10),
- .rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 27),
+ .format = VOP_REG(RK3066_SYS_CTRL1, 0x7, 10),
+ .rb_swap = VOP_REG(RK3066_SYS_CTRL1, 0x1, 27),
.dsp_info = VOP_REG(RK3066_WIN2_DSP_INFO, 0x0fff0fff, 0),
.dsp_st = VOP_REG(RK3066_WIN2_DSP_ST, 0x1fff1fff, 0),
.yrgb_mst = VOP_REG(RK3066_WIN2_MST, 0xffffffff, 0),
@@ -414,6 +413,9 @@ static const struct vop_common rk3066_common = {
.dither_down_en = VOP_REG(RK3066_DSP_CTRL0, 0x1, 11),
.dither_down_mode = VOP_REG(RK3066_DSP_CTRL0, 0x1, 10),
.dsp_blank = VOP_REG(RK3066_DSP_CTRL1, 0x1, 24),
+ .dither_up = VOP_REG(RK3066_DSP_CTRL0, 0x1, 9),
+ .dsp_lut_en = VOP_REG(RK3066_SYS_CTRL1, 0x1, 31),
+ .data_blank = VOP_REG(RK3066_DSP_CTRL1, 0x1, 25),
};
static const struct vop_win_data rk3066_vop_win_data[] = {
--
2.27.0
next prev parent reply other threads:[~2021-05-28 13:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-28 13:05 [PATCH v3 0/5] drm: rockchip: various ports for older VOPs Alex Bee
2021-05-28 13:05 ` [PATCH v3 1/5] drm: rockchip: add scaling for RK3036 win1 Alex Bee
2021-05-28 13:05 ` [PATCH v3 2/5] drm: rockchip: add missing registers for RK3188 Alex Bee
2021-05-28 13:05 ` Alex Bee [this message]
2021-05-28 13:05 ` [PATCH v3 4/5] drm: rockchip: add alpha support for RK3036, RK3066, RK3126 and RK3188 Alex Bee
2021-05-28 13:05 ` [PATCH v3 5/5] drm: rockchip: set alpha_en to 0 if it is not used Alex Bee
2021-05-28 18:09 ` [PATCH v3 0/5] drm: rockchip: various ports for older VOPs Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210528130554.72191-4-knaerzche@gmail.com \
--to=knaerzche@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=paul.kocialkowski@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox