From: Tanner Love <tannerlove.kernel@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Willem de Bruijn <willemb@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <peterz@infradead.org>,
Kees Cook <keescook@chromium.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
John Garry <john.garry@huawei.com>,
Barry Song <song.bao.hua@hisilicon.com>,
Romain Perier <romain.perier@gmail.com>,
Tanner Love <tannerlove@google.com>
Subject: [PATCH] genirq: change force_irqthreads from bool test to static key
Date: Wed, 2 Jun 2021 14:03:38 -0400 [thread overview]
Message-ID: <20210602180338.3324213-1-tannerlove.kernel@gmail.com> (raw)
From: Tanner Love <tannerlove@google.com>
With CONFIG_IRQ_FORCED_THREADING=y, testing the bool force_irqthreads
could incur a cache line miss in invoke_softirq().
Replace the test with a static key to avoid the potential cache miss.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tanner Love <tannerlove@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
---
drivers/ide/ide-iops.c | 7 +++----
include/linux/interrupt.h | 4 +++-
kernel/irq/manage.c | 6 +++---
3 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index f2be127ee96e..f86cdb8451e6 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -109,7 +109,6 @@ int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad,
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
unsigned long flags;
- bool irqs_threaded = force_irqthreads;
int i;
u8 stat;
@@ -117,7 +116,7 @@ int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad,
stat = tp_ops->read_status(hwif);
if (stat & ATA_BUSY) {
- if (!irqs_threaded) {
+ if (!force_irqthreads) {
local_save_flags(flags);
local_irq_enable_in_hardirq();
}
@@ -133,13 +132,13 @@ int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad,
if ((stat & ATA_BUSY) == 0)
break;
- if (!irqs_threaded)
+ if (!force_irqthreads)
local_irq_restore(flags);
*rstat = stat;
return -EBUSY;
}
}
- if (!irqs_threaded)
+ if (!force_irqthreads)
local_irq_restore(flags);
}
/*
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 4777850a6dc7..9e676c351f23 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -13,6 +13,7 @@
#include <linux/hrtimer.h>
#include <linux/kref.h>
#include <linux/workqueue.h>
+#include <linux/jump_label.h>
#include <linux/atomic.h>
#include <asm/ptrace.h>
@@ -504,7 +505,8 @@ extern int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
# ifdef CONFIG_PREEMPT_RT
# define force_irqthreads (true)
# else
-extern bool force_irqthreads;
+DECLARE_STATIC_KEY_FALSE(force_irqthreads_key);
+# define force_irqthreads (static_branch_unlikely(&force_irqthreads_key))
# endif
#else
#define force_irqthreads (0)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 4c14356543d9..395945e54929 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -25,12 +25,12 @@
#include "internals.h"
#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
-__read_mostly bool force_irqthreads;
-EXPORT_SYMBOL_GPL(force_irqthreads);
+DEFINE_STATIC_KEY_FALSE(force_irqthreads_key);
+EXPORT_SYMBOL_GPL(force_irqthreads_key);
static int __init setup_forced_irqthreads(char *arg)
{
- force_irqthreads = true;
+ static_branch_enable(&force_irqthreads_key);
return 0;
}
early_param("threadirqs", setup_forced_irqthreads);
--
2.32.0.rc0.204.g9fa02ecfa5-goog
next reply other threads:[~2021-06-02 18:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 18:03 Tanner Love [this message]
2021-06-02 21:05 ` [PATCH] genirq: change force_irqthreads from bool test to static key Kees Cook
2021-08-10 14:12 ` [tip: irq/core] genirq: Change force_irqthreads to a " tip-bot2 for Tanner Love
2021-08-10 20:52 ` tip-bot2 for Tanner Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602180338.3324213-1-tannerlove.kernel@gmail.com \
--to=tannerlove.kernel@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=john.garry@huawei.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=romain.perier@gmail.com \
--cc=song.bao.hua@hisilicon.com \
--cc=tannerlove@google.com \
--cc=tglx@linutronix.de \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox