[PATCH v2] clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare

[Jonathan Marek <jonathan@marek.ca>]

Caught this when looking at alpha-pll code. Untested but it is clear that
this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL.

Fixes: 691865bad627 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/clk-alpha-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 94b53c7db2f7f..eaedcceb766f9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1255,7 +1255,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 		return ret;
 
 	/* Setup PLL for calibration frequency */
-	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), cal_l);
+	regmap_write(pll->clkr.regmap, PLL_CAL_L_VAL(pll), cal_l);
 
 	/* Bringup the PLL at calibration frequency */
 	ret = clk_alpha_pll_enable(hw);
-- 
2.26.1