From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 1/7] habanalabs/gaudi: use standard error codes
Date: Wed, 9 Jun 2021 18:03:37 +0300 [thread overview]
Message-ID: <20210609150343.4712-1-ogabbay@kernel.org> (raw)
When there is an ECC error in the HBM, return a standard error code,
-EIO in this case, and not a positive value.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/gaudi/gaudi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 703f41488852..9b4bd38c2986 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -7471,7 +7471,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
struct hl_eq_hbm_ecc_data *hbm_ecc_data)
{
u32 base, val, val2, wr_par, rd_par, ca_par, derr, serr, type, ch;
- int err = 0;
+ int rc = 0;
if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
CPU_BOOT_DEV_STS0_HBM_ECC_EN) {
@@ -7516,7 +7516,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32_MASK(base + ch * 0x1000 + 0x06C, 0x0000FFFF);
val = (val & 0xFF) | ((val >> 8) & 0xFF);
if (val) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM%d pc%d interrupts info: WR_PAR=%d, RD_PAR=%d, CA_PAR=%d, SERR=%d, DERR=%d\n",
device, ch * 2, val & 0x1, (val >> 1) & 0x1,
@@ -7536,7 +7536,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32_MASK(base + ch * 0x1000 + 0x07C, 0x0000FFFF);
val = (val & 0xFF) | ((val >> 8) & 0xFF);
if (val) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM%d pc%d interrupts info: WR_PAR=%d, RD_PAR=%d, CA_PAR=%d, SERR=%d, DERR=%d\n",
device, ch * 2 + 1, val & 0x1, (val >> 1) & 0x1,
@@ -7565,7 +7565,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32(base + 0x8F30);
val2 = RREG32(base + 0x8F34);
if (val | val2) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM %d MC SRAM SERR info: Reg 0x8F30=0x%x, Reg 0x8F34=0x%x\n",
device, val, val2);
@@ -7573,13 +7573,13 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32(base + 0x8F40);
val2 = RREG32(base + 0x8F44);
if (val | val2) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM %d MC SRAM DERR info: Reg 0x8F40=0x%x, Reg 0x8F44=0x%x\n",
device, val, val2);
}
- return err;
+ return rc;
}
static int gaudi_hbm_event_to_dev(u16 hbm_event_type)
--
2.25.1
next reply other threads:[~2021-06-09 15:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 15:03 Oded Gabbay [this message]
2021-06-09 15:03 ` [PATCH 2/7] habanalabs: small code refactoring Oded Gabbay
2021-06-09 15:03 ` [PATCH 3/7] habanalabs: report EQ fault during heartbeat Oded Gabbay
2021-06-09 15:03 ` [PATCH 4/7] habanalabs: enable stop on error for all QMANs and engines Oded Gabbay
2021-06-09 15:03 ` [PATCH 5/7] habanalabs: enable dram scramble before linux f/w Oded Gabbay
2021-06-09 15:03 ` [PATCH 6/7] habanalabs: add hard reset timeout for PLDM Oded Gabbay
2021-06-09 15:03 ` [PATCH 7/7] habanalabs: print firmware versions Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609150343.4712-1-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox