[PATCH AUTOSEL 5.12 12/33] spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error code

Sasha Levin
2021-06-15T15:49:15Z

From: zpershuai <zpershuai@gmail.com>

[ Upstream commit f131767eefc47de2f8afb7950cdea78397997d66 ]

In zynq_qspi_probe function, when enable the device clock is done,
the return of all the functions should goto the clk_dis_all label.

If num_cs is not right then this should return a negative error
code but currently it returns success.

Signed-off-by: zpershuai <zpershuai@gmail.com>
Link: https://lore.kernel.org/r/1622110857-21812-1-git-send-email-zpershuai@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynq-qspi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5d8a5ee62fa2..79863c889e18 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -679,14 +679,14 @@ static int zynq_qspi_probe(struct platform_device *pdev)
xqspi->irq = platform_get_irq(pdev, 0);
if (xqspi->irq <= 0) {
ret = -ENXIO;
- goto remove_master;
+ goto clk_dis_all;
}
ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq,
0, pdev->name, xqspi);
if (ret != 0) {
ret = -ENXIO;
dev_err(&pdev->dev, "request_irq failed\n");
- goto remove_master;
+ goto clk_dis_all;
}

ret = of_property_read_u32(np, "num-cs",
@@ -694,8 +694,9 @@ static int zynq_qspi_probe(struct platform_device *pdev)
if (ret < 0) {
ctlr->num_chipselect = 1;
} else if (num_cs > ZYNQ_QSPI_MAX_NUM_CS) {
+ ret = -EINVAL;
dev_err(&pdev->dev, "only 2 chip selects are available\n");
- goto remove_master;
+ goto clk_dis_all;
} else {
ctlr->num_chipselect = num_cs;
}
--
2.30.2