[patch V3 63/66] x86/fpu/signal: Split out the direct restore code

[Thomas Gleixner <tglx@linutronix.de>]

Prepare for smarter failure handling of the direct restore.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/fpu/signal.c |  110 +++++++++++++++++++++----------------------
 1 file changed, 56 insertions(+), 54 deletions(-)

--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -249,10 +249,7 @@ sanitize_restored_user_xstate(union fpre
 	}
 }
 
-/*
- * Restore the FPU state directly from the userspace signal frame.
- */
-static int restore_fpregs_from_user(void __user *buf, u64 xrestore, bool fx_only)
+static int restore_hwregs_from_user(void __user *buf, u64 xrestore, bool fx_only)
 {
 	if (use_xsave()) {
 		u64 init_bv = xfeatures_mask_uabi() & ~xrestore;
@@ -273,6 +270,56 @@ static int restore_fpregs_from_user(void
 	}
 }
 
+static int restore_fpregs_from_user(void __user *buf, u64 xrestore, bool fx_only)
+{
+	struct fpu *fpu = &current->thread.fpu;
+	int ret ;
+
+	fpregs_lock();
+	pagefault_disable();
+	ret = restore_hwregs_from_user(buf, xrestore, fx_only);
+	pagefault_enable();
+
+	if (unlikely(ret)) {
+		/*
+		 * The above did an FPU restore operation, restricted to
+		 * the user portion of the registers, and failed, but the
+		 * microcode might have modified the FPU registers
+		 * nevertheless.
+		 *
+		 * If the FPU registers do not belong to current, then
+		 * invalidate the FPU register state otherwise the task
+		 * might preempt current and return to user space with
+		 * corrupted FPU registers.
+		 *
+		 * In case current owns the FPU registers then no further
+		 * action is required. The fixup in the slow path will
+		 * handle it correctly.
+		 */
+		if (test_thread_flag(TIF_NEED_FPU_LOAD))
+			__cpu_invalidate_fpregs_state();
+		fpregs_unlock();
+		return ret;
+	}
+
+	/*
+	 * Restore supervisor states: previous context switch etc has done
+	 * XSAVES and saved the supervisor states in the kernel buffer from
+	 * which they can be restored now.
+	 *
+	 * We cannot do a single XRSTORS here - which would be nice -
+	 * because the rest of the FPU registers are being restored from a
+	 * user buffer directly. The single XRSTORS happens below, when the
+	 * user buffer has been copied to the kernel one.
+	 */
+	if (test_thread_flag(TIF_NEED_FPU_LOAD) && xfeatures_mask_supervisor())
+		os_xrstor(&fpu->state.xsave, xfeatures_mask_supervisor());
+
+	fpregs_mark_activate();
+	fpregs_unlock();
+	return 0;
+}
+
 static int __fpu_restore_sig(void __user *buf, void __user *buf_fx,
 			     bool ia32_fxstate)
 {
@@ -297,61 +344,16 @@ static int __fpu_restore_sig(void __user
 		user_xfeatures = fx_sw_user.xfeatures;
 	}
 
-	if (!ia32_fxstate) {
+	if (likely(!ia32_fxstate)) {
 		/*
 		 * Attempt to restore the FPU registers directly from user
-		 * memory. For that to succeed, the user access cannot cause
-		 * page faults. If it does, fall back to the slow path below,
-		 * going through the kernel buffer with the enabled pagefault
-		 * handler.
+		 * memory. For that to succeed, the user access cannot cause page
+		 * faults. If it does, fall back to the slow path below, going
+		 * through the kernel buffer with the enabled pagefault handler.
 		 */
-		fpregs_lock();
-		pagefault_disable();
 		ret = restore_fpregs_from_user(buf_fx, user_xfeatures, fx_only);
-		pagefault_enable();
-		if (!ret) {
-
-			/*
-			 * Restore supervisor states: previous context switch
-			 * etc has done XSAVES and saved the supervisor states
-			 * in the kernel buffer from which they can be restored
-			 * now.
-			 *
-			 * We cannot do a single XRSTORS here - which would
-			 * be nice - because the rest of the FPU registers are
-			 * being restored from a user buffer directly. The
-			 * single XRSTORS happens below, when the user buffer
-			 * has been copied to the kernel one.
-			 */
-			if (test_thread_flag(TIF_NEED_FPU_LOAD) &&
-			    xfeatures_mask_supervisor()) {
-				os_xrstor(&fpu->state.xsave,
-					  xfeatures_mask_supervisor());
-			}
-			fpregs_mark_activate();
-			fpregs_unlock();
+		if (likely(!ret))
 			return 0;
-		}
-
-		/*
-		 * The above did an FPU restore operation, restricted to
-		 * the user portion of the registers, and failed, but the
-		 * microcode might have modified the FPU registers
-		 * nevertheless.
-		 *
-		 * If the FPU registers do not belong to current, then
-		 * invalidate the FPU register state otherwise the task might
-		 * preempt current and return to user space with corrupted
-		 * FPU registers.
-		 *
-		 * In case current owns the FPU registers then no further
-		 * action is required. The fixup below will handle it
-		 * correctly.
-		 */
-		if (test_thread_flag(TIF_NEED_FPU_LOAD))
-			__cpu_invalidate_fpregs_state();
-
-		fpregs_unlock();
 	} else {
 		/*
 		 * For 32-bit frames with fxstate, copy the fxstate so it can