[GIT PULL] regulator updates for v5.14

Mark Brown
2021-06-28T15:31:32Z

The following changes since commit 13311e74253fe64329390df80bed3f07314ddd61:

Linux 5.13-rc7 (2021-06-20 15:03:15 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v5.14

for you to fetch changes up to 7fb593cbd88cf4df01c096d4dc320f027dfa2560:

Merge remote-tracking branch 'regulator/for-5.14' into regulator-next (2021-06-23 16:56:31 +0100)

----------------------------------------------------------------
regulator: Updates for v5.14

The main core change this release is generic support for handling of
hardware errors from Matti Vaittinen, including some small updates to
the reboot and thermal code so we can share support for powering off the
system if things are going wrong enough. Otherwise this release we've
mainly seen the addition of new drivers, including MT6359 which has
pulled in some small changes from the MFD tree for build dependencies.

- Support for controlling the trigger points for hardware error
detection, and shared handlers for this.
- Support for Maxim MAX8993, Mediatek MT6359 and MT6359P, Qualcomm
PM8226 and SA8115P-ADP, and Sylergy TCS4526.

----------------------------------------------------------------
Alistair Francis (1):
regulator: sy7636a: Initial commit

Axel Lin (43):
regulator: hi6421v600: Remove unneeded *pmic from struct hi6421_spmi_reg_info
regulator: bd71815: Fix missing include files
regulator: fan53880: Convert to use .probe_new
regulator: fan53555: Fix slew_shift setting for tcs4525
regulator: fan53555: Cleanup unused define and redundant assignment
regulator: max8973: Convert to use regulator_set_ramp_delay_regmap
regulator: bd70528: Convert to use regulator_set_ramp_delay_regmap
regulator: qcom_smd: Make pm8953_lnldo linear_ranges entries properly sorted
regulator: mp886x: Convert to use regulator_set_ramp_delay_regmap
regulator: mp5416: Convert to use regulator_set_ramp_delay_regmap
regulator: rt4831: Add missing .owner field in regulator_desc
regulator: rk808: Convert to use regulator_set_ramp_delay_regmap
regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap
regulator: mt6315: Don't ignore devm_regulator_register failure
regulator: lp8755: Convert to use regulator_set_ramp_delay_regmap
regulator: mcp16502: Convert to use .probe_new
regulator: mcp16502: Convert to use regulator_set_ramp_delay_regmap
regulator: max77802: Remove .set_ramp_delay from max77802_buck_dvs_ops
regulator: max77802: Convert to use regulator_set_ramp_delay_regmap
regulator: fan53555: Fix missing slew_reg/mask/shift settings for FAN53526
regulator: fan53555: Convert to use regulator_set_ramp_delay_regmap
regulator: bd9576: Constify the voltage tables
regulator: max77686: Convert to use regulator_set_ramp_delay_regmap
regulator: mt6358: Use unsigned int for volt_tables
regulator: mt6359: Use unsigned int for volt_tables
regulator: mt6359: Get rid of linear_range tables
regulator: ltc3589: Convert to use regulator_set_ramp_delay_regmap
regulator: bd71815: Get rid of struct bd71815_pmic
regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCK
regulator: rt6160: Convert to use regulator_set_ramp_delay_regmap
regulator: hi6421v600: Use regulator_map_voltage_ascend
regulator: rt6160: Remove vsel_active_low from struct rt6160_priv
regulator: mt6315: Fix checking return value of devm_regmap_init_spmi_ext
regulator: rt6160: Fix setting suspend voltage
regulator: sy7636a: Add terminating entry for platform_device_id table
regulator: sy7636a: Make regulator_desc static const
regulator: sy7636a: Use rdev_get_drvdata at proper place
regulator: hi655x: Fix pass wrong pointer to config.driver_data
regulator: hi6421: Use correct variable type for regmap api val argument
regulator: hi6421v600: Fix setting idle mode
regulator: hi6421v600: Fix setting wrong driver_data
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
regulator: max8893: Select REGMAP_I2C to fix build error

Bartosz Dudziak (2):
regulator: qcom_smd: Add PM8226 regulator support
regulator: qcom: Document PM8226 smd regulator

Bhupesh Sharma (5):
regulator: qcom-rpmh: Cleanup terminator line commas
regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array
regulator: qcom-rpmh: Add new regulator found on SA8155p adp board
regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically
regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic

Bryan O'Donoghue (1):
regulator: Add a routine to set the current limit for QCOM PMIC VBUS

ChiYuan Huang (5):
regulator: rt6160: Add DT binding document for Richtek RT6160
regulator: rt6160: Add support for Richtek RT6160
regulator: rt6245: Add the binding document for Richtek RT6245
regulator: rt6245: Add support for Richtek RT6245
regulator: rt6160: Remove dummy line and add module description

Colin Ian King (1):
regulator: bd9576: Fix uninitializes variable may_have_irqs

Dmitry Osipenko (1):
regulator: core: Add regulator_sync_voltage_rdev()

Hsin-Hsiung Wang (7):
mfd: mt6358: Refine interrupt code
rtc: mt6397: refine RTC_TC_MTH
dt-bindings: mfd: Add compatible for the MediaTek MT6359 PMIC
dt-bindings: regulator: Add document for MT6359 regulator
mfd: Add support for the MediaTek MT6359 PMIC
regulator: mt6359: Add support for MT6359P regulator
regulator: mt6358: Fix vdram2 .vsel_mask

Mark Brown (8):
Merge series "Enable VBUS current boost on pm8150b platforms" from Bryan O'Donoghue <bryan.odonoghue@linaro.org>:
Merge branch 'for-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-5.14
Merge tag 'tb-mfd-regulator-rtc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into regulator-5.14
Merge tag 'for-5.14-regulator' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into regulator-5.14
Merge series "Extend regulator notification support" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:
Merge series "regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board" from Bhupesh Sharma <bhupesh.sharma@linaro.org>:
Merge remote-tracking branch 'regulator/for-5.13' into regulator-linus
Merge remote-tracking branch 'regulator/for-5.14' into regulator-next

Matti Vaittinen (12):
regulator: bd70528: Drop BD70528 support
regulator: Add protection limit properties
reboot: Add hardware protection power-off
thermal: Use generic HW-protection shutdown API
regulator: add warning flags
regulator: move rdev_print helpers to internal.h
regulator: IRQ based event/error notification helpers
regulator: add property parsing and callbacks to set protection limits
regulator: bd9576 add FET ON-resistance for OCW
regulator: bd9576: Support error reporting
regulator: bd9576: Fix the driver name in id table
MAINTAINERS: Add reviewer for regulator irq_helpers

Peter Geis (3):
regulator: fan53555: fix TCS4525 voltage calulation
regulator: fan53555: only bind tcs4525 to correct chip id
regulator: fan53555: fix tcs4525 function names

Randy Dunlap (1):
regulator: bd71815: add select to fix build

Rouven Czerwinski (1):
regulator: fixed: use dev_err_probe for gpio

Rudi Heitbaum (1):
regulator: fan53555: add tcs4526

Sergey Larin (2):
regulator: max8893: add regulator driver
regulator: Add MAX8893 bindings

Wen Su (1):
regulator: mt6359: Add support for MT6359 regulator

YueHaibing (1):
regulator: core: Use DEVICE_ATTR_RO macro

Zhen Lei (1):
regulator: userspace-consumer: use DEVICE_ATTR_RO/RW macro

Zou Wei (2):
regulator: uniphier: Add missing MODULE_DEVICE_TABLE
regulator: bd71815: fix platform_no_drv_owner.cocci warnings

Documentation/devicetree/bindings/mfd/mt6397.txt | 1 +
.../devicetree/bindings/regulator/max8893.yaml | 88 ++
.../bindings/regulator/mt6359-regulator.yaml | 385 +++++++
.../bindings/regulator/qcom,rpmh-regulator.yaml | 17 +-
.../bindings/regulator/qcom,smd-rpm-regulator.yaml | 5 +
.../devicetree/bindings/regulator/regulator.yaml | 82 ++
.../regulator/richtek,rt6160-regulator.yaml | 61 ++
.../regulator/richtek,rt6245-regulator.yaml | 89 ++
.../bindings/regulator/rohm,bd9576-regulator.yaml | 6 +
Documentation/driver-api/thermal/sysfs-api.rst | 24 +-
MAINTAINERS | 4 +
drivers/mfd/mt6358-irq.c | 89 +-
drivers/mfd/mt6397-core.c | 24 +
drivers/regulator/Kconfig | 55 +-
drivers/regulator/Makefile | 8 +-
drivers/regulator/bd70528-regulator.c | 283 -----
drivers/regulator/bd71815-regulator.c | 60 +-
drivers/regulator/bd9576-regulator.c | 1084 +++++++++++++++++---
drivers/regulator/core.c | 316 ++++--
drivers/regulator/da9052-regulator.c | 3 +-
drivers/regulator/devres.c | 52 +
drivers/regulator/fan53555.c | 118 +--
drivers/regulator/fan53880.c | 7 +-
drivers/regulator/fixed.c | 3 +-
drivers/regulator/hi6421-regulator.c | 8 +-
drivers/regulator/hi6421v600-regulator.c | 59 +-
drivers/regulator/hi655x-regulator.c | 16 +-
drivers/regulator/internal.h | 11 +
drivers/regulator/irq_helpers.c | 397 +++++++
drivers/regulator/lp8755.c | 55 +-
drivers/regulator/ltc3589.c | 73 +-
drivers/regulator/max77686-regulator.c | 42 +-
drivers/regulator/max77802-regulator.c | 70 +-
drivers/regulator/max8893.c | 183 ++++
drivers/regulator/max8973-regulator.c | 37 +-
drivers/regulator/mcp16502.c | 79 +-
drivers/regulator/mp5416.c | 44 +-
drivers/regulator/mp886x.c | 32 +-
drivers/regulator/mt6315-regulator.c | 21 +-
drivers/regulator/mt6358-regulator.c | 24 +-
drivers/regulator/mt6359-regulator.c | 997 ++++++++++++++++++
drivers/regulator/of_regulator.c | 58 ++
drivers/regulator/pca9450-regulator.c | 51 +-
drivers/regulator/qcom-labibb-regulator.c | 10 +-
drivers/regulator/qcom-rpmh-regulator.c | 62 +-
drivers/regulator/qcom_smd-regulator.c | 85 +-
drivers/regulator/qcom_spmi-regulator.c | 6 +-
drivers/regulator/qcom_usb_vbus-regulator.c | 12 +
drivers/regulator/rk808-regulator.c | 116 +--
drivers/regulator/rt4831-regulator.c | 3 +
drivers/regulator/rt6160-regulator.c | 319 ++++++
drivers/regulator/rt6245-regulator.c | 254 +++++
drivers/regulator/stpmic1_regulator.c | 20 +-
drivers/regulator/sy7636a-regulator.c | 128 +++
drivers/regulator/uniphier-regulator.c | 1 +
drivers/regulator/userspace-consumer.c | 14 +-
drivers/rtc/rtc-mt6397.c | 2 +-
drivers/thermal/thermal_core.c | 63 +-
include/linux/mfd/mt6358/core.h | 8 +-
include/linux/mfd/mt6359/core.h | 133 +++
include/linux/mfd/mt6359/registers.h | 529 ++++++++++
include/linux/mfd/mt6359p/registers.h | 249 +++++
include/linux/mfd/mt6397/core.h | 1 +
include/linux/mfd/mt6397/rtc.h | 1 +
include/linux/reboot.h | 1 +
include/linux/regulator/consumer.h | 14 +
include/linux/regulator/coupler.h | 5 -
include/linux/regulator/driver.h | 187 +++-
include/linux/regulator/machine.h | 26 +
include/linux/regulator/mt6359-regulator.h | 59 ++
kernel/reboot.c | 79 ++
71 files changed, 6262 insertions(+), 1246 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/max8893.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
delete mode 100644 drivers/regulator/bd70528-regulator.c
create mode 100644 drivers/regulator/irq_helpers.c
create mode 100644 drivers/regulator/max8893.c
create mode 100644 drivers/regulator/mt6359-regulator.c
create mode 100644 drivers/regulator/rt6160-regulator.c
create mode 100644 drivers/regulator/rt6245-regulator.c
create mode 100644 drivers/regulator/sy7636a-regulator.c
create mode 100644 include/linux/mfd/mt6359/core.h
create mode 100644 include/linux/mfd/mt6359/registers.h
create mode 100644 include/linux/mfd/mt6359p/registers.h
create mode 100644 include/linux/regulator/mt6359-regulator.h