From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Daniel Scally <djrscally@gmail.com>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-efi@vger.kernel.org, linux-media@vger.kernel.org,
devel@acpica.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Len Brown <lenb@kernel.org>, Ard Biesheuvel <ardb@kernel.org>,
Yong Zhi <yong.zhi@intel.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Bingbu Cao <bingbu.cao@intel.com>,
Tianshu Qiu <tian.shu.qiu@intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Robert Moore <robert.moore@intel.com>,
Erik Kaneda <erik.kaneda@intel.com>
Subject: [PATCH v2 1/1] ACPI: utils: Fix reference counting in for_each_acpi_dev_match()
Date: Mon, 12 Jul 2021 21:21:21 +0300 [thread overview]
Message-ID: <20210712182121.2936794-1-andy.shevchenko@gmail.com> (raw)
Currently it's possible to iterate over the dangling pointer in case the device
suddenly disappears. This may happen becase callers put it at the end of a loop.
Instead, let's move that call inside acpi_dev_get_next_match_dev().
Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver")
Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Fixes: edbd1bc4951e ("efi/dev-path-parser: Switch to use for_each_acpi_dev_match()")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
v2:
- rebased on top of v5.14-rc1 and hence added fix for EFI code
- added kernel documentation update to point out that
acpi_dev_get_next_match_dev() drops a reference on the given
ACPI device (Rafael)
drivers/acpi/utils.c | 7 +++----
drivers/firmware/efi/dev-path-parser.c | 1 -
drivers/media/pci/intel/ipu3/cio2-bridge.c | 6 ++----
include/acpi/acpi_bus.h | 5 -----
4 files changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index e7ddd281afff..d5cedffeeff9 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -860,11 +860,9 @@ EXPORT_SYMBOL(acpi_dev_present);
* Return the next match of ACPI device if another matching device was present
* at the moment of invocation, or NULL otherwise.
*
- * FIXME: The function does not tolerate the sudden disappearance of @adev, e.g.
- * in the case of a hotplug event. That said, the caller should ensure that
- * this will never happen.
- *
* The caller is responsible for invoking acpi_dev_put() on the returned device.
+ * On the other hand the function invokes acpi_dev_put() on the given @adev
+ * assuming that its reference counter had been increased beforehand.
*
* See additional information in acpi_dev_present() as well.
*/
@@ -880,6 +878,7 @@ acpi_dev_get_next_match_dev(struct acpi_device *adev, const char *hid, const cha
match.hrv = hrv;
dev = bus_find_device(&acpi_bus_type, start, &match, acpi_dev_match_cb);
+ acpi_dev_put(adev);
return dev ? to_acpi_device(dev) : NULL;
}
EXPORT_SYMBOL(acpi_dev_get_next_match_dev);
diff --git a/drivers/firmware/efi/dev-path-parser.c b/drivers/firmware/efi/dev-path-parser.c
index 10d4457417a4..eb9c65f97841 100644
--- a/drivers/firmware/efi/dev-path-parser.c
+++ b/drivers/firmware/efi/dev-path-parser.c
@@ -34,7 +34,6 @@ static long __init parse_acpi_path(const struct efi_dev_path *node,
break;
if (!adev->pnp.unique_id && node->acpi.uid == 0)
break;
- acpi_dev_put(adev);
}
if (!adev)
return -ENODEV;
diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
index 4657e99df033..59a36f922675 100644
--- a/drivers/media/pci/intel/ipu3/cio2-bridge.c
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
@@ -173,10 +173,8 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
int ret;
for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
- if (!adev->status.enabled) {
- acpi_dev_put(adev);
+ if (!adev->status.enabled)
continue;
- }
if (bridge->n_sensors >= CIO2_NUM_PORTS) {
acpi_dev_put(adev);
@@ -185,7 +183,6 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
}
sensor = &bridge->sensors[bridge->n_sensors];
- sensor->adev = adev;
strscpy(sensor->name, cfg->hid, sizeof(sensor->name));
ret = cio2_bridge_read_acpi_buffer(adev, "SSDB",
@@ -215,6 +212,7 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
goto err_free_swnodes;
}
+ sensor->adev = acpi_dev_get(adev);
adev->fwnode.secondary = fwnode;
dev_info(&cio2->dev, "Found supported sensor %s\n",
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 1ae993fee4a5..b9d434a93632 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -707,11 +707,6 @@ acpi_dev_get_first_match_dev(const char *hid, const char *uid, s64 hrv);
* @hrv: Hardware Revision of the device, pass -1 to not check _HRV
*
* The caller is responsible for invoking acpi_dev_put() on the returned device.
- *
- * FIXME: Due to above requirement there is a window that may invalidate @adev
- * and next iteration will use a dangling pointer, e.g. in the case of a
- * hotplug event. That said, the caller should ensure that this will never
- * happen.
*/
#define for_each_acpi_dev_match(adev, hid, uid, hrv) \
for (adev = acpi_dev_get_first_match_dev(hid, uid, hrv); \
--
2.32.0
next reply other threads:[~2021-07-12 18:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-12 18:21 Andy Shevchenko [this message]
2021-07-13 22:32 ` [PATCH v2 1/1] ACPI: utils: Fix reference counting in for_each_acpi_dev_match() Daniel Scally
2021-07-16 17:27 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210712182121.2936794-1-andy.shevchenko@gmail.com \
--to=andy.shevchenko@gmail.com \
--cc=ardb@kernel.org \
--cc=bingbu.cao@intel.com \
--cc=devel@acpica.org \
--cc=djrscally@gmail.com \
--cc=erik.kaneda@intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=rjw@rjwysocki.net \
--cc=robert.moore@intel.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox