[PATCH] dt-bindings: regulator: Convert UniPhier regulator to json-schema

Kunihiko Hayashi
2021-06-23T01:52:34Z

Convert the UniPhier regulator binding to DT schema format.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
.../regulator/socionext,uniphier-regulator.yaml | 85 ++++++++++++++++++++++
.../bindings/regulator/uniphier-regulator.txt | 58 ---------------
2 files changed, 85 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
new file mode 100644
index 0000000..861d5f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+ This regulator controls VBUS and belongs to USB3 glue layer. Before using
+ the regulator, it is necessary to control the clocks and resets to enable
+ this layer. These clocks and resets should be described in each property.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+ - $ref: "regulator.yaml#"
+
+# USB3 Controller
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro4-usb3-regulator
+ - socionext,uniphier-pro5-usb3-regulator
+ - socionext,uniphier-pxs2-usb3-regulator
+ - socionext,uniphier-ld20-usb3-regulator
+ - socionext,uniphier-pxs3-usb3-regulator
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items: # for others
+ - const: link
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - items: # for Pro4, Pro5
+ - const: gio
+ - const: link
+ - items:
+ - const: link
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ usb-glue@65b00000 {
+ compatible = "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_vbus0: regulators@100 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
deleted file mode 100644
index 94fd38b..0000000
--- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Socionext UniPhier Regulator Controller
-
-This describes the devicetree bindings for regulator controller implemented
-on Socionext UniPhier SoCs.
-
-USB3 Controller
----------------
-
-This regulator controls VBUS and belongs to USB3 glue layer. Before using
-the regulator, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
- "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
- "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
- "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
- "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
- "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
- According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
- "gio", "link" - for Pro4 and Pro5 SoCs
- "link" - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
- According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
- "gio", "link" - for Pro4 and Pro5 SoCs
- "link" - for others
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
- usb-glue@65b00000 {
- compatible = "socionext,uniphier-ld20-dwc3-glue",
- "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x65b00000 0x400>;
-
- usb_vbus0: regulators@100 {
- compatible = "socionext,uniphier-ld20-usb3-regulator";
- reg = <0x100 0x10>;
- clock-names = "link";
- clocks = <&sys_clk 14>;
- reset-names = "link";
- resets = <&sys_rst 14>;
- };
-
- phy {
- ...
- phy-supply = <&usb_vbus0>;
- };
- ...
- };
--
2.7.4