public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: shiva.linuxworks@gmail.com
To: rjw@rjwysocki.net, pavel@ucw.cz, len.brown@intel.com,
	linux-pm@vger.kernel.org, kbusch@kernel.org, axboe@fb.com,
	hch@lst.de, sagi@grimberg.me, linux-nvme@lists.infradead.org
Cc: linux-kernel@vger.kernel.org,
	Shivamurthy Shastri <sshivamurthy@micron.com>,
	Keith Busch <kbush@kernel.org>
Subject: [PATCH v2 1/2] PM: enable support for imminent power loss
Date: Mon, 26 Jul 2021 13:22:22 +0000	[thread overview]
Message-ID: <20210726132223.1661-2-sshivamurthy@micron.com> (raw)
In-Reply-To: <20210726132223.1661-1-sshivamurthy@micron.com>

From: Shivamurthy Shastri <sshivamurthy@micron.com>

If the shutdown is pwerformed when the platform is running on the
limited backup power supply, some of the devices might not have enough
power to perform a clean shutdown.

It is necessary to inform the driver about the limited backup power
supply, to allow the driver to decide to perform the minimal required
operation for a fast and clean shutdown.

Signed-off-by: Keith Busch <kbush@kernel.org>
Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
 include/linux/suspend.h | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 8af13ba60c7e..1898792c10d3 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -210,9 +210,10 @@ extern int suspend_valid_only_mem(suspend_state_t state);
 
 extern unsigned int pm_suspend_global_flags;
 
-#define PM_SUSPEND_FLAG_FW_SUSPEND	BIT(0)
-#define PM_SUSPEND_FLAG_FW_RESUME	BIT(1)
-#define PM_SUSPEND_FLAG_NO_PLATFORM	BIT(2)
+#define PM_SUSPEND_FLAG_FW_SUSPEND		BIT(0)
+#define PM_SUSPEND_FLAG_FW_RESUME		BIT(1)
+#define PM_SUSPEND_FLAG_NO_PLATFORM		BIT(2)
+#define PM_SUSPEND_FLAG_POWER_LOSS_IMMINENT	BIT(3)
 
 static inline void pm_suspend_clear_flags(void)
 {
@@ -234,6 +235,11 @@ static inline void pm_set_suspend_no_platform(void)
 	pm_suspend_global_flags |= PM_SUSPEND_FLAG_NO_PLATFORM;
 }
 
+static inline void pm_set_power_loss_imminent(void)
+{
+	pm_suspend_global_flags |= PM_SUSPEND_FLAG_POWER_LOSS_IMMINENT;
+}
+
 /**
  * pm_suspend_via_firmware - Check if platform firmware will suspend the system.
  *
@@ -291,6 +297,22 @@ static inline bool pm_suspend_no_platform(void)
 	return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_NO_PLATFORM);
 }
 
+/**
+ * pm_power_loss_imminent - Check if platform is running on limited backup power
+ * source
+ *
+ * To be called during system-wide power management transitions to sleep states.
+ *
+ * Return 'true' if power loss may be imminent due to platform running on
+ * limited backup supply. If set during a shutdown, drivers should use any
+ * available shortcuts to prepare their device for abrupt power loss.
+ */
+static inline bool pm_power_loss_imminent(void)
+{
+	return !!(pm_suspend_global_flags &
+		  PM_SUSPEND_FLAG_POWER_LOSS_IMMINENT);
+}
+
 /* Suspend-to-idle state machnine. */
 enum s2idle_states {
 	S2IDLE_STATE_NONE,      /* Not suspended/suspending. */
-- 
2.25.1


  reply	other threads:[~2021-07-26 13:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26 13:22 [PATCH v2 0/2] Abrupt Shutdown for NVMe SSD shiva.linuxworks
2021-07-26 13:22 ` shiva.linuxworks [this message]
2021-07-26 19:41   ` [PATCH v2 1/2] PM: enable support for imminent power loss Pavel Machek
2021-07-26 20:16     ` Keith Busch
2021-07-26 13:22 ` [PATCH v2 2/2] nvme: Add abrupt shutdown support shiva.linuxworks
2021-07-26 16:07   ` kernel test robot
2021-07-26 16:43   ` kernel test robot
2021-07-26 15:24 ` [PATCH v2 0/2] Abrupt Shutdown for NVMe SSD Keith Busch
2021-07-29 10:37   ` [EXT] " Shivamurthy Shastri (sshivamurthy)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210726132223.1661-2-sshivamurthy@micron.com \
    --to=shiva.linuxworks@gmail.com \
    --cc=axboe@fb.com \
    --cc=hch@lst.de \
    --cc=kbusch@kernel.org \
    --cc=kbush@kernel.org \
    --cc=len.brown@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rjw@rjwysocki.net \
    --cc=sagi@grimberg.me \
    --cc=sshivamurthy@micron.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox