From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Evgeny Novikov <novikov@ispras.ru>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Kirill Shilimanov <kirill.shilimanov@huawei.com>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"ldv-project@linuxtesting.org" <ldv-project@linuxtesting.org>
Subject: Re: [PATCH] mtd: rawnand: mxic: Enable and prepare clocks in probe
Date: Mon, 16 Aug 2021 10:01:14 +0200 [thread overview]
Message-ID: <20210816100114.384f01b9@xps13> (raw)
In-Reply-To: <CAHp75VcgqZEHBTXpNApGfRkhgjpCvbgj+yxUZbbO+=0DOvZLQg@mail.gmail.com>
Hi Andy,
Andy Shevchenko <andy.shevchenko@gmail.com> wrote on Thu, 12 Aug 2021
15:13:10 +0300:
> On Thursday, August 12, 2021, Evgeny Novikov <novikov@ispras.ru> wrote:
>
> > It seems that mxic_nfc_probe() missed invocation of
> > mxic_nfc_clk_enable(). The patch fixed that. In addition, error handling
> > was refined appropriately.
>
>
> NAK. Until you provide a deeper analysis, like how this works before your
> change.
>
>
> Please, don’t blindly generate patches, this can even your bot do, just
> think about each change and preferable test on the real hardware.
>
> The above is to all your lovely contributions.
>
>
> >
> > Found by Linux Driver Verification project (linuxtesting.org).
> >
> > Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
> > Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
> > Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
> > ---
> > drivers/mtd/nand/raw/mxic_nand.c | 16 ++++++++++++----
> > 1 file changed, 12 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/raw/mxic_nand.c b/drivers/mtd/nand/raw/mxic_
> > nand.c
> > index da1070993994..37e75bf60ee5 100644
> > --- a/drivers/mtd/nand/raw/mxic_nand.c
> > +++ b/drivers/mtd/nand/raw/mxic_nand.c
> > @@ -509,9 +509,15 @@ static int mxic_nfc_probe(struct platform_device
> > *pdev)
> > if (IS_ERR(nfc->send_dly_clk))
> > return PTR_ERR(nfc->send_dly_clk);
> >
> > + err = mxic_nfc_clk_enable(nfc);
> > + if (err)
> > + return err;
As Andy said, this is not needed.
> > +
> > nfc->regs = devm_platform_ioremap_resource(pdev, 0);
> > - if (IS_ERR(nfc->regs))
> > - return PTR_ERR(nfc->regs);
> > + if (IS_ERR(nfc->regs)) {
> > + err = PTR_ERR(nfc->regs);
> > + goto fail;
> > + }
> >
> > nand_chip = &nfc->chip;
> > mtd = nand_to_mtd(nand_chip);
> > @@ -527,8 +533,10 @@ static int mxic_nfc_probe(struct platform_device
> > *pdev)
> > nand_chip->controller = &nfc->controller;
> >
> > irq = platform_get_irq(pdev, 0);
> > - if (irq < 0)
> > - return irq;
> > + if (irq < 0) {
> > + err = irq;
> > + goto fail;
However some reworking is needed in the error path.
That goto statement should be renamed and devm_request_irq() should not
jump to it.
> > + }
> >
> > mxic_nfc_hw_init(nfc);
> >
> > --
> > 2.26.2
> >
> >
>
Thanks,
Miquèl
next prev parent reply other threads:[~2021-08-16 8:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-12 11:38 [PATCH] mtd: rawnand: mxic: Enable and prepare clocks in probe Evgeny Novikov
[not found] ` <CAHp75VcgqZEHBTXpNApGfRkhgjpCvbgj+yxUZbbO+=0DOvZLQg@mail.gmail.com>
2021-08-16 8:01 ` Miquel Raynal [this message]
2021-08-17 10:36 ` Evgeny Novikov
2021-08-17 10:55 ` Miquel Raynal
2021-08-17 10:59 ` Miquel Raynal
2021-08-26 5:09 ` ycllin
2021-08-17 9:08 ` Evgeny Novikov
2021-08-17 11:47 ` Andy Shevchenko
2021-08-21 17:26 ` Evgeny Novikov
2021-08-22 8:27 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210816100114.384f01b9@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=andy.shevchenko@gmail.com \
--cc=kirill.shilimanov@huawei.com \
--cc=ldv-project@linuxtesting.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=novikov@ispras.ru \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox