RE: [PATCHv2] clk:aspeed:Fix AST2600 hpll calculate formula

Ryan Chen
2021-09-13T05:31:56Z

> -----Original Message-----
> From: Claudiu.Beznea@microchip.com <Claudiu.Beznea@microchip.com>
> Sent: Monday, September 13, 2021 1:26 PM
> To: Ryan Chen <ryan_chen@aspeedtech.com>; mturquette@baylibre.com;
> sboyd@kernel.org; joel@jms.id.au; andrew@aj.id.au; linux-clk@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCHv2] clk:aspeed:Fix AST2600 hpll calculate formula
>
> On 08.09.2021 12:18, Ryan Chen wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know
> > the content is safe
> >
> > AST2600 HPLL calculate formula [SCU200] HPLL Numerator(M): have fixed
> > value depend on SCU strap.
> > M = SCU500[10] ? 0x5F : SCU500[8] ? 0xBF : SCU200[12:0]
> >
> > if SCU500[10] = 1, M=0x5F.
> > else if SCU500[10]=0 & SCU500[8]=1, M=0xBF.
> > others (SCU510[10]=0 and SCU510[8]=0)
> > depend on SCU200[12:0] (default 0x8F) register setting.
> >
> > HPLL Denumerator (N) = SCU200[18:13] (default 0x2)
> > HPLL Divider (P) = SCU200[22:19] (default 0x0)
> >
> > Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
> > Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> > ---
> > drivers/clk/clk-ast2600.c | 29 ++++++++++++++++++++++++++++-
> > 1 file changed, 28 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
> > index 085d0a18b2b6..5d8c46bcf237 100644
> > --- a/drivers/clk/clk-ast2600.c
> > +++ b/drivers/clk/clk-ast2600.c
> > @@ -169,6 +169,33 @@ static const struct clk_div_table
> > ast2600_div_table[] = { };
> >
> > /* For hpll/dpll/epll/mpll */
> > +static struct clk_hw *ast2600_calc_hpll(const char *name, u32 val) {
> > + unsigned int mult, div;
> > + u32 hwstrap = readl(scu_g6_base + ASPEED_G6_STRAP1);
> > +
> > + if (val & BIT(24)) {
> > + /* Pass through mode */
> > + mult = div = 1;
> > + } else {
> > + /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) */
> > + u32 m = val & 0x1fff;
> > + u32 n = (val >> 13) & 0x3f;
> > + u32 p = (val >> 19) & 0xf;
> > +
> > + if (hwstrap & BIT(10))
> > + m = 0x5F;
> > + else {
> > + if (hwstrap & BIT(8))
>
> You may write it directly:
> else if (hwstrap & BIT(8))
>
Hello,
Like I commit message M = SCU500[10] ? 0x5F : SCU500[8] ? 0xBF : SCU200[12:0]
it need keep from register read, if BIT(8)/BIT(10) not 1.

> > + m = 0xBF;
> > + }
> > + mult = (m + 1) / (n + 1);
> > + div = (p + 1);
> > + }
> > + return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
> > + mult, div);
> > +};
> > +
> > static struct clk_hw *ast2600_calc_pll(const char *name, u32 val) {
> > unsigned int mult, div;
> > @@ -716,7 +743,7 @@ static void __init aspeed_g6_cc(struct regmap
> *map)
> > * and we assume that it is enabled
> > */
> > regmap_read(map, ASPEED_HPLL_PARAM, &val);
> > - aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] =
> ast2600_calc_pll("hpll", val);
> > + aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] =
> > + ast2600_calc_hpll("hpll", val);
> >
> > regmap_read(map, ASPEED_MPLL_PARAM, &val);
> > aspeed_g6_clk_data->hws[ASPEED_CLK_MPLL] =
> > ast2600_calc_pll("mpll", val);
> > --
> > 2.17.1
> >