[PATCH net-next] net: phy: at803x: add support for qca 8327 internal phy

[Ansuel Smith <ansuelsmth@gmail.com>]

Add support for qca8327 internal phy needed for correct init of the
switch port. It does use the same qca8337 function and reg just with a
different id.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/net/phy/at803x.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index bdac087058b2..19a426aa4ede 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1420,6 +1420,19 @@ static struct phy_driver at803x_driver[] = {
 	.get_sset_count = at803x_get_sset_count,
 	.get_strings = at803x_get_strings,
 	.get_stats = at803x_get_stats,
+}, {
+	/* QCA8327 */
+	.phy_id = QCA8327_PHY_ID,
+	.phy_id_mask = QCA8K_PHY_ID_MASK,
+	.name = "QCA PHY 8327",
+	/* PHY_GBIT_FEATURES */
+	.probe = at803x_probe,
+	.flags = PHY_IS_INTERNAL,
+	.config_init = qca83xx_config_init,
+	.soft_reset = genphy_soft_reset,
+	.get_sset_count = at803x_get_sset_count,
+	.get_strings = at803x_get_strings,
+	.get_stats = at803x_get_stats,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
2.32.0