From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 2/5] staging: r8188eu: remove dead led control functions
Date: Fri, 24 Sep 2021 22:49:14 +0200 [thread overview]
Message-ID: <20210924204917.6313-3-straube.linux@gmail.com> (raw)
In-Reply-To: <20210924204917.6313-1-straube.linux@gmail.com>
LedStrategy is SW_LED_MODE1 in this driver. Remove led control
functions that are not used for SW_LED_MODE1.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/core/rtw_led.c | 643 +------------------------
1 file changed, 1 insertion(+), 642 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_led.c b/drivers/staging/r8188eu/core/rtw_led.c
index 49324e9789b9..da02cd4fdc52 100644
--- a/drivers/staging/r8188eu/core/rtw_led.c
+++ b/drivers/staging/r8188eu/core/rtw_led.c
@@ -410,624 +410,6 @@ static void SwLedControlMode1(struct adapter *padapter, enum LED_CTL_MODE LedAct
}
}
- /* Arcadyan/Sitecom , added by chiyoko, 20090216 */
-static void SwLedControlMode2(struct adapter *padapter, enum LED_CTL_MODE LedAction)
-{
- struct led_priv *ledpriv = &padapter->ledpriv;
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- struct LED_871x *pLed = &ledpriv->SwLed0;
-
- switch (LedAction) {
- case LED_CTL_SITE_SURVEY:
- if (pmlmepriv->LinkDetectInfo.bBusyTraffic) {
- } else if (!pLed->bLedScanBlinkInProgress) {
- if (IS_LED_WPS_BLINKING(pLed))
- return;
-
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- pLed->bLedScanBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SCAN;
- pLed->BlinkTimes = 24;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SCAN_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_TX:
- case LED_CTL_RX:
- if ((!pLed->bLedBlinkInProgress) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
- if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
- return;
- pLed->bLedBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_TXRX;
- pLed->BlinkTimes = 2;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_FASTER_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_LINK:
- pLed->CurrLedState = RTW_LED_ON;
- pLed->BlinkingLedState = RTW_LED_ON;
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- _set_timer(&pLed->BlinkTimer, 0);
- break;
- case LED_CTL_START_WPS: /* wait until xinpin finish */
- case LED_CTL_START_WPS_BOTTON:
- if (!pLed->bLedWPSBlinkInProgress) {
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- pLed->bLedWPSBlinkInProgress = true;
- pLed->CurrLedState = RTW_LED_ON;
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, 0);
- }
- break;
- case LED_CTL_STOP_WPS:
- pLed->bLedWPSBlinkInProgress = false;
- if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
- SwLedOff(padapter, pLed);
- } else {
- pLed->CurrLedState = RTW_LED_ON;
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, 0);
- }
- break;
- case LED_CTL_STOP_WPS_FAIL:
- pLed->bLedWPSBlinkInProgress = false;
- if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
- SwLedOff(padapter, pLed);
- } else {
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, 0);
- }
- break;
- case LED_CTL_START_TO_LINK:
- case LED_CTL_NO_LINK:
- if (!IS_LED_BLINKING(pLed)) {
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, 0);
- }
- break;
- case LED_CTL_POWER_OFF:
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
-
- _set_timer(&pLed->BlinkTimer, 0);
- break;
- default:
- break;
- }
-}
-
- /* COREGA, added by chiyoko, 20090316 */
- static void SwLedControlMode3(struct adapter *padapter, enum LED_CTL_MODE LedAction)
-{
- struct led_priv *ledpriv = &padapter->ledpriv;
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- struct LED_871x *pLed = &ledpriv->SwLed0;
-
- switch (LedAction) {
- case LED_CTL_SITE_SURVEY:
- if (pmlmepriv->LinkDetectInfo.bBusyTraffic) {
- } else if (!pLed->bLedScanBlinkInProgress) {
- if (IS_LED_WPS_BLINKING(pLed))
- return;
-
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- pLed->bLedScanBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SCAN;
- pLed->BlinkTimes = 24;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SCAN_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_TX:
- case LED_CTL_RX:
- if ((!pLed->bLedBlinkInProgress) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
- if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
- return;
- pLed->bLedBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_TXRX;
- pLed->BlinkTimes = 2;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_FASTER_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_LINK:
- if (IS_LED_WPS_BLINKING(pLed))
- return;
- pLed->CurrLedState = RTW_LED_ON;
- pLed->BlinkingLedState = RTW_LED_ON;
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
-
- _set_timer(&pLed->BlinkTimer, 0);
- break;
- case LED_CTL_START_WPS: /* wait until xinpin finish */
- case LED_CTL_START_WPS_BOTTON:
- if (!pLed->bLedWPSBlinkInProgress) {
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- pLed->bLedWPSBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_WPS;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SCAN_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_STOP_WPS:
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- } else {
- pLed->bLedWPSBlinkInProgress = true;
- }
-
- pLed->CurrLedState = LED_BLINK_WPS_STOP;
- if (pLed->bLedOn) {
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
- } else {
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, 0);
- }
- break;
- case LED_CTL_STOP_WPS_FAIL:
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, 0);
- break;
- case LED_CTL_START_TO_LINK:
- case LED_CTL_NO_LINK:
- if (!IS_LED_BLINKING(pLed)) {
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, 0);
- }
- break;
- case LED_CTL_POWER_OFF:
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
-
- _set_timer(&pLed->BlinkTimer, 0);
- break;
- default:
- break;
- }
-}
-
- /* Edimax-Belkin, added by chiyoko, 20090413 */
-static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAction)
-{
- struct led_priv *ledpriv = &padapter->ledpriv;
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- struct LED_871x *pLed = &ledpriv->SwLed0;
- struct LED_871x *pLed1 = &ledpriv->SwLed1;
-
- switch (LedAction) {
- case LED_CTL_START_TO_LINK:
- if (pLed1->bLedWPSBlinkInProgress) {
- pLed1->bLedWPSBlinkInProgress = false;
- _cancel_timer_ex(&pLed1->BlinkTimer);
-
- pLed1->BlinkingLedState = RTW_LED_OFF;
- pLed1->CurrLedState = RTW_LED_OFF;
-
- if (pLed1->bLedOn)
- _set_timer(&pLed->BlinkTimer, 0);
- }
-
- if (!pLed->bLedStartToLinkBlinkInProgress) {
- if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
- return;
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedNoLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedNoLinkBlinkInProgress = false;
- }
-
- pLed->bLedStartToLinkBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_StartToBlink;
- if (pLed->bLedOn) {
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SLOWLY_INTERVAL);
- } else {
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NORMAL_INTERVAL);
- }
- }
- break;
- case LED_CTL_LINK:
- case LED_CTL_NO_LINK:
- /* LED1 settings */
- if (LedAction == LED_CTL_LINK) {
- if (pLed1->bLedWPSBlinkInProgress) {
- pLed1->bLedWPSBlinkInProgress = false;
- _cancel_timer_ex(&pLed1->BlinkTimer);
-
- pLed1->BlinkingLedState = RTW_LED_OFF;
- pLed1->CurrLedState = RTW_LED_OFF;
-
- if (pLed1->bLedOn)
- _set_timer(&pLed->BlinkTimer, 0);
- }
- }
-
- if (!pLed->bLedNoLinkBlinkInProgress) {
- if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
- return;
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
-
- pLed->bLedNoLinkBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SLOWLY;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NO_LINK_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_SITE_SURVEY:
- if ((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
- } else if (!pLed->bLedScanBlinkInProgress) {
- if (IS_LED_WPS_BLINKING(pLed))
- return;
-
- if (pLed->bLedNoLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedNoLinkBlinkInProgress = false;
- }
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- pLed->bLedScanBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SCAN;
- pLed->BlinkTimes = 24;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SCAN_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_TX:
- case LED_CTL_RX:
- if (!pLed->bLedBlinkInProgress) {
- if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
- return;
- if (pLed->bLedNoLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedNoLinkBlinkInProgress = false;
- }
- pLed->bLedBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_TXRX;
- pLed->BlinkTimes = 2;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_FASTER_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_START_WPS: /* wait until xinpin finish */
- case LED_CTL_START_WPS_BOTTON:
- if (pLed1->bLedWPSBlinkInProgress) {
- pLed1->bLedWPSBlinkInProgress = false;
- _cancel_timer_ex(&pLed1->BlinkTimer);
-
- pLed1->BlinkingLedState = RTW_LED_OFF;
- pLed1->CurrLedState = RTW_LED_OFF;
-
- if (pLed1->bLedOn)
- _set_timer(&pLed->BlinkTimer, 0);
- }
-
- if (!pLed->bLedWPSBlinkInProgress) {
- if (pLed->bLedNoLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedNoLinkBlinkInProgress = false;
- }
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- pLed->bLedWPSBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_WPS;
- if (pLed->bLedOn) {
- pLed->BlinkingLedState = RTW_LED_OFF;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SLOWLY_INTERVAL);
- } else {
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NORMAL_INTERVAL);
- }
- }
- break;
- case LED_CTL_STOP_WPS: /* WPS connect success */
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
-
- pLed->bLedNoLinkBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SLOWLY;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-
- break;
- case LED_CTL_STOP_WPS_FAIL: /* WPS authentication fail */
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
- pLed->bLedNoLinkBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SLOWLY;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-
- /* LED1 settings */
- if (pLed1->bLedWPSBlinkInProgress)
- _cancel_timer_ex(&pLed1->BlinkTimer);
- else
- pLed1->bLedWPSBlinkInProgress = true;
- pLed1->CurrLedState = LED_BLINK_WPS_STOP;
- if (pLed1->bLedOn)
- pLed1->BlinkingLedState = RTW_LED_OFF;
- else
- pLed1->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NORMAL_INTERVAL);
- break;
- case LED_CTL_STOP_WPS_FAIL_OVERLAP: /* WPS session overlap */
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
- pLed->bLedNoLinkBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SLOWLY;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-
- /* LED1 settings */
- if (pLed1->bLedWPSBlinkInProgress)
- _cancel_timer_ex(&pLed1->BlinkTimer);
- else
- pLed1->bLedWPSBlinkInProgress = true;
- pLed1->CurrLedState = LED_BLINK_WPS_STOP_OVERLAP;
- pLed1->BlinkTimes = 10;
- if (pLed1->bLedOn)
- pLed1->BlinkingLedState = RTW_LED_OFF;
- else
- pLed1->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_NORMAL_INTERVAL);
- break;
- case LED_CTL_POWER_OFF:
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
-
- if (pLed->bLedNoLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedNoLinkBlinkInProgress = false;
- }
- if (pLed->bLedLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedLinkBlinkInProgress = false;
- }
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- if (pLed->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedWPSBlinkInProgress = false;
- }
- if (pLed->bLedScanBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedScanBlinkInProgress = false;
- }
- if (pLed->bLedStartToLinkBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedStartToLinkBlinkInProgress = false;
- }
- if (pLed1->bLedWPSBlinkInProgress) {
- _cancel_timer_ex(&pLed1->BlinkTimer);
- pLed1->bLedWPSBlinkInProgress = false;
- }
- pLed1->BlinkingLedState = LED_UNKNOWN;
- SwLedOff(padapter, pLed);
- SwLedOff(padapter, pLed1);
- break;
- default:
- break;
- }
-}
-
- /* Sercomm-Belkin, added by chiyoko, 20090415 */
-static void
-SwLedControlMode5(
- struct adapter *padapter,
- enum LED_CTL_MODE LedAction
-)
-{
- struct led_priv *ledpriv = &padapter->ledpriv;
- struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
- struct LED_871x *pLed = &ledpriv->SwLed0;
-
- switch (LedAction) {
- case LED_CTL_POWER_ON:
- case LED_CTL_NO_LINK:
- case LED_CTL_LINK: /* solid blue */
- pLed->CurrLedState = RTW_LED_ON;
- pLed->BlinkingLedState = RTW_LED_ON;
-
- _set_timer(&pLed->BlinkTimer, 0);
- break;
- case LED_CTL_SITE_SURVEY:
- if ((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
- } else if (!pLed->bLedScanBlinkInProgress) {
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- pLed->bLedScanBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_SCAN;
- pLed->BlinkTimes = 24;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_SCAN_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_TX:
- case LED_CTL_RX:
- if (!pLed->bLedBlinkInProgress) {
- if (pLed->CurrLedState == LED_BLINK_SCAN)
- return;
- pLed->bLedBlinkInProgress = true;
- pLed->CurrLedState = LED_BLINK_TXRX;
- pLed->BlinkTimes = 2;
- if (pLed->bLedOn)
- pLed->BlinkingLedState = RTW_LED_OFF;
- else
- pLed->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed->BlinkTimer, LED_BLINK_FASTER_INTERVAL_ALPHA);
- }
- break;
- case LED_CTL_POWER_OFF:
- pLed->CurrLedState = RTW_LED_OFF;
- pLed->BlinkingLedState = RTW_LED_OFF;
-
- if (pLed->bLedBlinkInProgress) {
- _cancel_timer_ex(&pLed->BlinkTimer);
- pLed->bLedBlinkInProgress = false;
- }
- SwLedOff(padapter, pLed);
- break;
- default:
- break;
- }
-}
-
- /* WNC-Corega, added by chiyoko, 20090902 */
-static void
-SwLedControlMode6(
- struct adapter *padapter,
- enum LED_CTL_MODE LedAction
-)
-{
- struct led_priv *ledpriv = &padapter->ledpriv;
- struct LED_871x *pLed0 = &ledpriv->SwLed0;
-
- switch (LedAction) {
- case LED_CTL_POWER_ON:
- case LED_CTL_LINK:
- case LED_CTL_NO_LINK:
- _cancel_timer_ex(&pLed0->BlinkTimer);
- pLed0->CurrLedState = RTW_LED_ON;
- pLed0->BlinkingLedState = RTW_LED_ON;
- _set_timer(&pLed0->BlinkTimer, 0);
- break;
- case LED_CTL_POWER_OFF:
- SwLedOff(padapter, pLed0);
- break;
- default:
- break;
- }
-}
-
void BlinkHandler(struct LED_871x *pLed)
{
struct adapter *padapter = pLed->padapter;
@@ -1063,28 +445,5 @@ void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction)
LedAction == LED_CTL_POWER_ON))
return;
- switch (ledpriv->LedStrategy) {
- case SW_LED_MODE0:
- break;
- case SW_LED_MODE1:
- SwLedControlMode1(padapter, LedAction);
- break;
- case SW_LED_MODE2:
- SwLedControlMode2(padapter, LedAction);
- break;
- case SW_LED_MODE3:
- SwLedControlMode3(padapter, LedAction);
- break;
- case SW_LED_MODE4:
- SwLedControlMode4(padapter, LedAction);
- break;
- case SW_LED_MODE5:
- SwLedControlMode5(padapter, LedAction);
- break;
- case SW_LED_MODE6:
- SwLedControlMode6(padapter, LedAction);
- break;
- default:
- break;
- }
+ SwLedControlMode1(padapter, LedAction);
}
--
2.33.0
next prev parent reply other threads:[~2021-09-24 20:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-24 20:49 [PATCH 0/5] staging: r8188eu: remove dead led code Michael Straube
2021-09-24 20:49 ` [PATCH 1/5] staging: r8188eu: remove dead led blink functions Michael Straube
2021-09-24 20:49 ` Michael Straube [this message]
2021-09-24 20:49 ` [PATCH 3/5] staging: r8188eu: remove unnecessary comments Michael Straube
2021-09-24 20:49 ` [PATCH 4/5] staging: r8188eu: remove _InitHWLed() Michael Straube
2021-09-24 20:49 ` [PATCH 5/5] staging: r8188eu: remove LedStrategy from struct led_priv Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210924204917.6313-3-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox