From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Eric Biggers <ebiggers@google.com>,
Raul E Rangel <rrangel@chromium.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Adrian Hunter <adrian.hunter@intel.com>,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org
Subject: [PATCH v1 5/6] mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al)
Date: Tue, 5 Oct 2021 13:24:29 +0300 [thread overview]
Message-ID: <20211005102430.63716-6-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20211005102430.63716-1-andriy.shevchenko@linux.intel.com>
The last user of this struct gone couple of releases ago.
Remove the dead code for good and encourage people to use
MMC core functionality for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mmc/host/sdhci-pci-core.c | 76 +------------------------------
drivers/mmc/host/sdhci-pci.h | 2 -
2 files changed, 1 insertion(+), 77 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 8d01285e1b32..a4279437bb5f 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -345,73 +345,6 @@ static int pch_hc_probe_slot(struct sdhci_pci_slot *slot)
return 0;
}
-#ifdef CONFIG_PM
-
-static irqreturn_t sdhci_pci_sd_cd(int irq, void *dev_id)
-{
- struct sdhci_pci_slot *slot = dev_id;
- struct sdhci_host *host = slot->host;
-
- mmc_detect_change(host->mmc, msecs_to_jiffies(200));
- return IRQ_HANDLED;
-}
-
-static void sdhci_pci_add_own_cd(struct sdhci_pci_slot *slot)
-{
- int err, irq, gpio = slot->cd_gpio;
-
- slot->cd_gpio = -EINVAL;
- slot->cd_irq = -EINVAL;
-
- if (!gpio_is_valid(gpio))
- return;
-
- err = devm_gpio_request(&slot->chip->pdev->dev, gpio, "sd_cd");
- if (err < 0)
- goto out;
-
- err = gpio_direction_input(gpio);
- if (err < 0)
- goto out_free;
-
- irq = gpio_to_irq(gpio);
- if (irq < 0)
- goto out_free;
-
- err = request_irq(irq, sdhci_pci_sd_cd, IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING, "sd_cd", slot);
- if (err)
- goto out_free;
-
- slot->cd_gpio = gpio;
- slot->cd_irq = irq;
-
- return;
-
-out_free:
- devm_gpio_free(&slot->chip->pdev->dev, gpio);
-out:
- dev_warn(&slot->chip->pdev->dev, "failed to setup card detect wake up\n");
-}
-
-static void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot)
-{
- if (slot->cd_irq >= 0)
- free_irq(slot->cd_irq, slot);
-}
-
-#else
-
-static inline void sdhci_pci_add_own_cd(struct sdhci_pci_slot *slot)
-{
-}
-
-static inline void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot)
-{
-}
-
-#endif
-
static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE;
@@ -2113,7 +2046,6 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
slot->chip = chip;
slot->host = host;
slot->rst_n_gpio = -EINVAL;
- slot->cd_gpio = -EINVAL;
slot->cd_idx = -1;
host->hw_name = "PCI";
@@ -2184,15 +2116,11 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
if (ret)
goto remove;
- sdhci_pci_add_own_cd(slot);
-
/*
* Check if the chip needs a separate GPIO for card detect to wake up
* from runtime suspend. If it is not there, don't allow runtime PM.
- * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
*/
- if (chip->fixes && chip->fixes->own_cd_for_runtime_pm &&
- !gpio_is_valid(slot->cd_gpio) && slot->cd_idx < 0)
+ if (chip->fixes && chip->fixes->own_cd_for_runtime_pm && slot->cd_idx < 0)
chip->allow_runtime_pm = false;
return slot;
@@ -2212,8 +2140,6 @@ static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
int dead;
u32 scratch;
- sdhci_pci_remove_own_cd(slot);
-
dead = 0;
scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS);
if (scratch == (u32)-1)
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 15b36cd47860..8bb3b9c78589 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -158,8 +158,6 @@ struct sdhci_pci_slot {
struct sdhci_host *host;
int rst_n_gpio;
- int cd_gpio;
- int cd_irq;
int cd_idx;
bool cd_override_level;
--
2.33.0
next prev parent reply other threads:[~2021-10-05 10:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 10:24 [PATCH v1 0/6] mmc: sdhci-pci: Add some CD GPIO related quirks Andy Shevchenko
2021-10-05 10:24 ` [PATCH v1 1/6] mmc: sdhci: Introduce couple of quirks to ignore particular state of CD GPIO Andy Shevchenko
2021-10-08 9:38 ` Adrian Hunter
2021-10-05 10:24 ` [PATCH v1 2/6] mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield Andy Shevchenko
2021-10-05 10:24 ` [PATCH v1 3/6] mmc: sdhci: Replace bxt_get_cd() with SDHCI_QUIRK_CARD_DETECTION_IF_GPIO_HIGH Andy Shevchenko
2021-10-05 10:24 ` [PATCH v1 4/6] mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al) Andy Shevchenko
2021-10-08 9:42 ` Adrian Hunter
2021-10-05 10:24 ` Andy Shevchenko [this message]
2021-10-08 9:45 ` [PATCH v1 5/6] mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq " Adrian Hunter
2021-10-05 10:24 ` [PATCH v1 6/6] mmc: sdhci-pci: Remove dead code (rst_n_gpio " Andy Shevchenko
2021-10-08 9:45 ` Adrian Hunter
2021-10-07 16:42 ` [PATCH v1 0/6] mmc: sdhci-pci: Add some CD GPIO related quirks Andy Shevchenko
2021-10-07 18:03 ` Adrian Hunter
2021-10-12 20:37 ` Andy Shevchenko
2021-10-07 21:39 ` Raul Rangel
2021-10-12 20:41 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211005102430.63716-6-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=adrian.hunter@intel.com \
--cc=ebiggers@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=rrangel@chromium.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox