From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Masami Hiramatsu <mhiramat@kernel.org>
Subject: [for-linus][PATCH 10/27] kprobes: treewide: Use kprobe_opcode_t * for the code address in get_optimized_kprobe()
Date: Tue, 05 Oct 2021 09:57:43 -0400 [thread overview]
Message-ID: <20211005135827.364882678@goodmis.org> (raw)
In-Reply-To: 20211005135733.485175654@goodmis.org
From: Masami Hiramatsu <mhiramat@kernel.org>
Since get_optimized_kprobe() is only used inside kprobes,
it doesn't need to use 'unsigned long' type for 'addr' parameter.
Make it use 'kprobe_opcode_t *' for the 'addr' parameter and
subsequent call of arch_within_optimized_kprobe() also should use
'kprobe_opcode_t *'.
Note that MAX_OPTIMIZED_LENGTH and RELATIVEJUMP_SIZE are defined
by byte-size, but the size of 'kprobe_opcode_t' depends on the
architecture. Therefore, we must be careful when calculating
addresses using those macros.
Link: https://lkml.kernel.org/r/163163040680.489837.12133032364499833736.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
---
arch/arm/probes/kprobes/opt-arm.c | 7 ++++---
arch/powerpc/kernel/optprobes.c | 6 +++---
arch/x86/kernel/kprobes/opt.c | 6 +++---
include/linux/kprobes.h | 2 +-
kernel/kprobes.c | 10 +++++-----
5 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c
index c78180172120..dbef34ed933f 100644
--- a/arch/arm/probes/kprobes/opt-arm.c
+++ b/arch/arm/probes/kprobes/opt-arm.c
@@ -347,10 +347,11 @@ void arch_unoptimize_kprobes(struct list_head *oplist,
}
int arch_within_optimized_kprobe(struct optimized_kprobe *op,
- unsigned long addr)
+ kprobe_opcode_t *addr)
{
- return ((unsigned long)op->kp.addr <= addr &&
- (unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
+ return (op->kp.addr <= addr &&
+ op->kp.addr + (RELATIVEJUMP_SIZE / sizeof(kprobe_opcode_t)) > addr);
+
}
void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
diff --git a/arch/powerpc/kernel/optprobes.c b/arch/powerpc/kernel/optprobes.c
index c79899abcec8..325ba544883c 100644
--- a/arch/powerpc/kernel/optprobes.c
+++ b/arch/powerpc/kernel/optprobes.c
@@ -301,8 +301,8 @@ void arch_unoptimize_kprobes(struct list_head *oplist, struct list_head *done_li
}
}
-int arch_within_optimized_kprobe(struct optimized_kprobe *op, unsigned long addr)
+int arch_within_optimized_kprobe(struct optimized_kprobe *op, kprobe_opcode_t *addr)
{
- return ((unsigned long)op->kp.addr <= addr &&
- (unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
+ return (op->kp.addr <= addr &&
+ op->kp.addr + (RELATIVEJUMP_SIZE / sizeof(kprobe_opcode_t)) > addr);
}
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 71425ebba98a..b4a54a52aa59 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -367,10 +367,10 @@ int arch_check_optimized_kprobe(struct optimized_kprobe *op)
/* Check the addr is within the optimized instructions. */
int arch_within_optimized_kprobe(struct optimized_kprobe *op,
- unsigned long addr)
+ kprobe_opcode_t *addr)
{
- return ((unsigned long)op->kp.addr <= addr &&
- (unsigned long)op->kp.addr + op->optinsn.size > addr);
+ return (op->kp.addr <= addr &&
+ op->kp.addr + op->optinsn.size > addr);
}
/* Free optimized instruction slot */
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 9c28fbb18e74..6a5995f334a0 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -329,7 +329,7 @@ extern void arch_unoptimize_kprobes(struct list_head *oplist,
struct list_head *done_list);
extern void arch_unoptimize_kprobe(struct optimized_kprobe *op);
extern int arch_within_optimized_kprobe(struct optimized_kprobe *op,
- unsigned long addr);
+ kprobe_opcode_t *addr);
extern void opt_pre_handler(struct kprobe *p, struct pt_regs *regs);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index ec3d97fd8c6b..b6f1dcf4bff3 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -485,15 +485,15 @@ static int kprobe_queued(struct kprobe *p)
* Return an optimized kprobe whose optimizing code replaces
* instructions including 'addr' (exclude breakpoint).
*/
-static struct kprobe *get_optimized_kprobe(unsigned long addr)
+static struct kprobe *get_optimized_kprobe(kprobe_opcode_t *addr)
{
int i;
struct kprobe *p = NULL;
struct optimized_kprobe *op;
/* Don't check i == 0, since that is a breakpoint case. */
- for (i = 1; !p && i < MAX_OPTIMIZED_LENGTH; i++)
- p = get_kprobe((void *)(addr - i));
+ for (i = 1; !p && i < MAX_OPTIMIZED_LENGTH / sizeof(kprobe_opcode_t); i++)
+ p = get_kprobe(addr - i);
if (p && kprobe_optready(p)) {
op = container_of(p, struct optimized_kprobe, kp);
@@ -967,7 +967,7 @@ static void __arm_kprobe(struct kprobe *p)
lockdep_assert_held(&text_mutex);
/* Find the overlapping optimized kprobes. */
- _p = get_optimized_kprobe((unsigned long)p->addr);
+ _p = get_optimized_kprobe(p->addr);
if (unlikely(_p))
/* Fallback to unoptimized kprobe */
unoptimize_kprobe(_p, true);
@@ -989,7 +989,7 @@ static void __disarm_kprobe(struct kprobe *p, bool reopt)
if (!kprobe_queued(p)) {
arch_disarm_kprobe(p);
/* If another kprobe was blocked, re-optimize it. */
- _p = get_optimized_kprobe((unsigned long)p->addr);
+ _p = get_optimized_kprobe(p->addr);
if (unlikely(_p) && reopt)
optimize_kprobe(_p);
}
--
2.32.0
next prev parent reply other threads:[~2021-10-05 14:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 13:57 [for-linus][PATCH 00/27] tracing: Updates for 5.16 Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 01/27] kprobes: Do not use local variable when creating debugfs file Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 02/27] kprobes: Use helper to parse boolean input from userspace Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 03/27] kprobe: Simplify prepare_kprobe() by dropping redundant version Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 04/27] csky: ftrace: Drop duplicate implementation of arch_check_ftrace_location() Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 05/27] kprobes: Make arch_check_ftrace_location static Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 06/27] kprobes: treewide: Cleanup the error messages for kprobes Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 07/27] kprobes: Fix coding style issues Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 08/27] kprobes: Use IS_ENABLED() instead of kprobes_built_in() Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 09/27] kprobes: Add assertions for required lock Steven Rostedt
2021-10-05 13:57 ` Steven Rostedt [this message]
2021-10-05 13:57 ` [for-linus][PATCH 11/27] kprobes: Use bool type for functions which returns boolean value Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 12/27] ia64: kprobes: Fix to pass correct trampoline address to the handler Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 13/27] kprobes: treewide: Replace arch_deref_entry_point() with dereference_symbol_descriptor() Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 14/27] kprobes: treewide: Remove trampoline_address from kretprobe_trampoline_handler() Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 15/27] kprobes: treewide: Make it harder to refer kretprobe_trampoline directly Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 16/27] kprobes: Add kretprobe_find_ret_addr() for searching return address Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 17/27] objtool: Add frame-pointer-specific function ignore Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 18/27] objtool: Ignore unwind hints for ignored functions Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 19/27] x86/kprobes: Add UNWIND_HINT_FUNC on kretprobe_trampoline() Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 20/27] ARC: Add instruction_pointer_set() API Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 21/27] ia64: " Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 22/27] arm: kprobes: Make space for instruction pointer on stack Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 23/27] kprobes: Enable stacktrace from pt_regs in kretprobe handler Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 24/27] x86/kprobes: Push a fake return address at kretprobe_trampoline Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 25/27] x86/unwind: Recover kretprobe trampoline entry Steven Rostedt
2021-10-05 13:57 ` [for-linus][PATCH 26/27] tracing: Show kretprobe unknown indicator only for kretprobe_trampoline Steven Rostedt
2021-10-05 13:58 ` [for-linus][PATCH 27/27] x86/kprobes: Fixup return address in generic trampoline handler Steven Rostedt
2021-10-05 15:00 ` [for-linus][PATCH 00/27] tracing: Updates for 5.16 Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211005135827.364882678@goodmis.org \
--to=rostedt@goodmis.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=mingo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox