From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH] staging: r8188eu: remove some dead code
Date: Fri, 8 Oct 2021 19:26:21 +0200 [thread overview]
Message-ID: <20211008172621.8721-1-straube.linux@gmail.com> (raw)
In this driver SupportICType is ODM_RTL8188E and SupportInterface is
ODM_ITRF_USB. Remove an if statement that is never true and remove
function odm_DIGbyRSSI_LPS() which is used only in this dead if block.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
Tested on x86_64 with Inter-Tech DMG-02.
drivers/staging/r8188eu/hal/odm.c | 59 +--------------------------
drivers/staging/r8188eu/include/odm.h | 14 -------
2 files changed, 1 insertion(+), 72 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/odm.c b/drivers/staging/r8188eu/hal/odm.c
index bc49dc856a60..d3f8c7442daf 100644
--- a/drivers/staging/r8188eu/hal/odm.c
+++ b/drivers/staging/r8188eu/hal/odm.c
@@ -186,17 +186,7 @@ void ODM_DMWatchdog(struct odm_dm_struct *pDM_Odm)
odm_FalseAlarmCounterStatistics(pDM_Odm);
odm_RSSIMonitorCheck(pDM_Odm);
- /* For CE Platform(SPRD or Tablet) */
- /* 8723A or 8189ES platform */
- /* NeilChen--2012--08--24-- */
- /* Fix Leave LPS issue */
- if ((pDM_Odm->Adapter->pwrctrlpriv.pwr_mode != PS_MODE_ACTIVE) &&/* in LPS mode */
- ((pDM_Odm->SupportICType & (ODM_RTL8723A)) ||
- (pDM_Odm->SupportICType & (ODM_RTL8188E) &&
- ((pDM_Odm->SupportInterface == ODM_ITRF_SDIO)))))
- odm_DIGbyRSSI_LPS(pDM_Odm);
- else
- odm_DIG(pDM_Odm);
+ odm_DIG(pDM_Odm);
odm_CCKPacketDetectionThresh(pDM_Odm);
if (*pDM_Odm->pbPowerSaving)
@@ -456,53 +446,6 @@ void ODM_Write_DIG(struct odm_dm_struct *pDM_Odm, u8 CurrentIGI)
}
}
-/* Need LPS mode for CE platform --2012--08--24--- */
-/* 8723AS/8189ES */
-void odm_DIGbyRSSI_LPS(struct odm_dm_struct *pDM_Odm)
-{
- struct adapter *pAdapter = pDM_Odm->Adapter;
- struct false_alarm_stats *pFalseAlmCnt = &pDM_Odm->FalseAlmCnt;
-
- u8 RSSI_Lower = DM_DIG_MIN_NIC; /* 0x1E or 0x1C */
- u8 bFwCurrentInPSMode = false;
- u8 CurrentIGI = pDM_Odm->RSSI_Min;
-
- if (!(pDM_Odm->SupportICType & (ODM_RTL8723A | ODM_RTL8188E)))
- return;
-
- CurrentIGI = CurrentIGI + RSSI_OFFSET_DIG;
- bFwCurrentInPSMode = pAdapter->pwrctrlpriv.bFwCurrentInPSMode;
-
- /* Using FW PS mode to make IGI */
- if (bFwCurrentInPSMode) {
- /* Adjust by FA in LPS MODE */
- if (pFalseAlmCnt->Cnt_all > DM_DIG_FA_TH2_LPS)
- CurrentIGI = CurrentIGI + 2;
- else if (pFalseAlmCnt->Cnt_all > DM_DIG_FA_TH1_LPS)
- CurrentIGI = CurrentIGI + 1;
- else if (pFalseAlmCnt->Cnt_all < DM_DIG_FA_TH0_LPS)
- CurrentIGI = CurrentIGI - 1;
- } else {
- CurrentIGI = RSSI_Lower;
- }
-
- /* Lower bound checking */
-
- /* RSSI Lower bound check */
- if ((pDM_Odm->RSSI_Min - 10) > DM_DIG_MIN_NIC)
- RSSI_Lower = (pDM_Odm->RSSI_Min - 10);
- else
- RSSI_Lower = DM_DIG_MIN_NIC;
-
- /* Upper and Lower Bound checking */
- if (CurrentIGI > DM_DIG_MAX_NIC)
- CurrentIGI = DM_DIG_MAX_NIC;
- else if (CurrentIGI < RSSI_Lower)
- CurrentIGI = RSSI_Lower;
-
- ODM_Write_DIG(pDM_Odm, CurrentIGI);/* ODM_Write_DIG(pDM_Odm, pDM_DigTable->CurIGValue); */
-}
-
void odm_DIGInit(struct odm_dm_struct *pDM_Odm)
{
struct rtw_dig *pDM_DigTable = &pDM_Odm->DM_DigTable;
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
index 48d383f91c16..ac053312d817 100644
--- a/drivers/staging/r8188eu/include/odm.h
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -4,18 +4,6 @@
#ifndef __HALDMOUTSRC_H__
#define __HALDMOUTSRC_H__
-/* */
-/* 3 PSD Handler */
-/* 3============================================================ */
-
-/* LPS define */
-#define DM_DIG_FA_TH0_LPS 4 /* 4 in lps */
-#define DM_DIG_FA_TH1_LPS 15 /* 15 lps */
-#define DM_DIG_FA_TH2_LPS 30 /* 30 lps */
-#define RSSI_OFFSET_DIG 0x05;
-
-/* structure and define */
-
/* Add for AP/ADSLpseudo DM structuer requirement. */
/* We need to remove to other position??? */
struct rtl8192cd_priv {
@@ -972,8 +960,6 @@ u32 ConvertTo_dB(u32 Value);
u32 GetPSDData(struct odm_dm_struct *pDM_Odm, unsigned int point,
u8 initial_gain_psd);
-void odm_DIGbyRSSI_LPS(struct odm_dm_struct *pDM_Odm);
-
u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid,
u32 ra_mask, u8 rssi_level);
--
2.33.0
reply other threads:[~2021-10-08 17:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211008172621.8721-1-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox