From: Florian Westphal <fw@strlen.de>
To: selinux@vger.kernel.org
Cc: paul@paul-moore.com, stephen.smalley.work@gmail.com,
eparis@parisplace.org, linux-kernel@vger.kernel.org,
omosnace@redhat.com, Florian Westphal <fw@strlen.de>
Subject: [PATCH selinux v3] selinux: remove unneeded ipv6 hook wrappers
Date: Mon, 11 Oct 2021 22:22:29 +0200 [thread overview]
Message-ID: <20211011202229.28289-1-fw@strlen.de> (raw)
Netfilter places the protocol number the hook function is getting called
from in state->pf, so we can use that instead of an extra wrapper.
While at it, remove one-line wrappers too and make
selinux_ip_{out,forward,postroute} useable as hook function.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
v3: also remove the one-line wrappers, just adjust function signature
of the actual functions (Ondrej Mosnacek)
security/selinux/hooks.c | 80 +++++++++-------------------------------
1 file changed, 18 insertions(+), 62 deletions(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index e7ebd45ca345..3f6462451921 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -5688,10 +5688,11 @@ static int selinux_tun_dev_open(void *security)
#ifdef CONFIG_NETFILTER
-static unsigned int selinux_ip_forward(struct sk_buff *skb,
- const struct net_device *indev,
- u16 family)
+static unsigned int selinux_ip_forward(void *priv, struct sk_buff *skb,
+ const struct nf_hook_state *state)
{
+ const struct net_device *indev = state->in;
+ u16 family = state->pf;
int err;
char *addrp;
u32 peer_sid;
@@ -5746,25 +5747,10 @@ static unsigned int selinux_ip_forward(struct sk_buff *skb,
return NF_ACCEPT;
}
-static unsigned int selinux_ipv4_forward(void *priv,
- struct sk_buff *skb,
- const struct nf_hook_state *state)
-{
- return selinux_ip_forward(skb, state->in, PF_INET);
-}
-
-#if IS_ENABLED(CONFIG_IPV6)
-static unsigned int selinux_ipv6_forward(void *priv,
- struct sk_buff *skb,
- const struct nf_hook_state *state)
-{
- return selinux_ip_forward(skb, state->in, PF_INET6);
-}
-#endif /* IPV6 */
-
-static unsigned int selinux_ip_output(struct sk_buff *skb,
- u16 family)
+static unsigned int selinux_ip_output(void *priv, struct sk_buff *skb,
+ const struct nf_hook_state *state)
{
+ u16 family = state->pf;
struct sock *sk;
u32 sid;
@@ -5804,21 +5790,6 @@ static unsigned int selinux_ip_output(struct sk_buff *skb,
return NF_ACCEPT;
}
-static unsigned int selinux_ipv4_output(void *priv,
- struct sk_buff *skb,
- const struct nf_hook_state *state)
-{
- return selinux_ip_output(skb, PF_INET);
-}
-
-#if IS_ENABLED(CONFIG_IPV6)
-static unsigned int selinux_ipv6_output(void *priv,
- struct sk_buff *skb,
- const struct nf_hook_state *state)
-{
- return selinux_ip_output(skb, PF_INET6);
-}
-#endif /* IPV6 */
static unsigned int selinux_ip_postroute_compat(struct sk_buff *skb,
int ifindex,
@@ -5854,10 +5825,12 @@ static unsigned int selinux_ip_postroute_compat(struct sk_buff *skb,
return NF_ACCEPT;
}
-static unsigned int selinux_ip_postroute(struct sk_buff *skb,
- const struct net_device *outdev,
- u16 family)
+static unsigned int selinux_ip_postroute(void *priv,
+ struct sk_buff *skb,
+ const struct nf_hook_state *state)
{
+ const struct net_device *outdev = state->out;
+ u16 family = state->pf;
u32 secmark_perm;
u32 peer_sid;
int ifindex = outdev->ifindex;
@@ -5993,23 +5966,6 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb,
return NF_ACCEPT;
}
-
-static unsigned int selinux_ipv4_postroute(void *priv,
- struct sk_buff *skb,
- const struct nf_hook_state *state)
-{
- return selinux_ip_postroute(skb, state->out, PF_INET);
-}
-
-#if IS_ENABLED(CONFIG_IPV6)
-static unsigned int selinux_ipv6_postroute(void *priv,
- struct sk_buff *skb,
- const struct nf_hook_state *state)
-{
- return selinux_ip_postroute(skb, state->out, PF_INET6);
-}
-#endif /* IPV6 */
-
#endif /* CONFIG_NETFILTER */
static int selinux_netlink_send(struct sock *sk, struct sk_buff *skb)
@@ -7470,38 +7426,38 @@ DEFINE_LSM(selinux) = {
static const struct nf_hook_ops selinux_nf_ops[] = {
{
- .hook = selinux_ipv4_postroute,
+ .hook = selinux_ip_postroute,
.pf = NFPROTO_IPV4,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP_PRI_SELINUX_LAST,
},
{
- .hook = selinux_ipv4_forward,
+ .hook = selinux_ip_forward,
.pf = NFPROTO_IPV4,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP_PRI_SELINUX_FIRST,
},
{
- .hook = selinux_ipv4_output,
+ .hook = selinux_ip_output,
.pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_SELINUX_FIRST,
},
#if IS_ENABLED(CONFIG_IPV6)
{
- .hook = selinux_ipv6_postroute,
+ .hook = selinux_ip_postroute,
.pf = NFPROTO_IPV6,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP6_PRI_SELINUX_LAST,
},
{
- .hook = selinux_ipv6_forward,
+ .hook = selinux_ip_forward,
.pf = NFPROTO_IPV6,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP6_PRI_SELINUX_FIRST,
},
{
- .hook = selinux_ipv6_output,
+ .hook = selinux_ip_output,
.pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_SELINUX_FIRST,
--
2.32.0
next reply other threads:[~2021-10-11 20:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-11 20:22 Florian Westphal [this message]
2021-10-11 21:50 ` [PATCH selinux v3] selinux: remove unneeded ipv6 hook wrappers Paul Moore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211011202229.28289-1-fw@strlen.de \
--to=fw@strlen.de \
--cc=eparis@parisplace.org \
--cc=linux-kernel@vger.kernel.org \
--cc=omosnace@redhat.com \
--cc=paul@paul-moore.com \
--cc=selinux@vger.kernel.org \
--cc=stephen.smalley.work@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox