public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dan Williams <dan.j.williams@intel.com>
Cc: <linux-cxl@vger.kernel.org>,
	Ben Widawsky <ben.widawsky@intel.com>,
	<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<hch@lst.de>
Subject: Re: [PATCH v3 07/10] cxl/pci: Split cxl_pci_setup_regs()
Date: Fri, 15 Oct 2021 17:44:33 +0100	[thread overview]
Message-ID: <20211015174433.0000368a@Huawei.com> (raw)
In-Reply-To: <163379787433.692348.2451270397309803556.stgit@dwillia2-desk3.amr.corp.intel.com>

On Sat, 9 Oct 2021 09:44:34 -0700
Dan Williams <dan.j.williams@intel.com> wrote:

> From: Ben Widawsky <ben.widawsky@intel.com>
> 
> In preparation for moving parts of register mapping to cxl_core, split

Ah. Guess this planned move is why the naming change in the earlier patch.
Fair enough, but perhaps call it out there as well as here.

No comments to add to this one.

> cxl_pci_setup_regs() into a helper that finds register blocks,
> (cxl_find_regblock()), and a generic wrapper that probes the precise
> register sets within a block (cxl_setup_regs()).
> 
> Move the actual mapping (cxl_map_regs()) of the only register-set that
> cxl_pci cares about (memory device registers) up a level from the former
> cxl_pci_setup_regs() into cxl_pci_probe().
> 
> With this change the unused component registers are no longer mapped,
> but the helpers are primed to move into the core.
> 
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> [djbw: rebase on the cxl_register_map refactor]
> [djbw: drop cxl_map_regs() for component registers]
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/cxl/pci.c |   73 +++++++++++++++++++++++++++--------------------------
>  1 file changed, 37 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index b42407d067ac..b6bc8e5ca028 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -433,72 +433,69 @@ static void cxl_decode_regblock(u32 reg_lo, u32 reg_hi,
>  }
>  
>  /**
> - * cxl_pci_setup_regs() - Setup necessary MMIO.
> - * @cxlm: The CXL memory device to communicate with.
> + * cxl_find_regblock() - Locate register blocks by type
> + * @pdev: The CXL PCI device to enumerate.
> + * @type: Register Block Indicator id
> + * @map: Enumeration output, clobbered on error
>   *
> - * Return: 0 if all necessary registers mapped.
> + * Return: 0 if register block enumerated, negative error code otherwise
>   *
> - * A memory device is required by spec to implement a certain set of MMIO
> - * regions. The purpose of this function is to enumerate and map those
> - * registers.
> + * A CXL DVSEC may additional point one or more register blocks, search

may point to one or more...
(perhaps - I'm not quite sure of the intended meaning)

> + * for them by @type.
>   */
> -static int cxl_pci_setup_regs(struct cxl_mem *cxlm)
> +static int cxl_find_regblock(struct pci_dev *pdev, enum cxl_regloc_type type,
> +			     struct cxl_register_map *map)
>  {
>  	u32 regloc_size, regblocks;
> -	int regloc, i, n_maps, ret = 0;
> -	struct device *dev = cxlm->dev;
> -	struct pci_dev *pdev = to_pci_dev(dev);
> -	struct cxl_register_map *map, maps[CXL_REGLOC_RBI_TYPES];
> +	int regloc, i;
>  
>  	regloc = cxl_pci_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC_DVSEC_ID);
> -	if (!regloc) {
> -		dev_err(dev, "register location dvsec not found\n");
> +	if (!regloc)
>  		return -ENXIO;
> -	}
>  
> -	/* Get the size of the Register Locator DVSEC */
>  	pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, &regloc_size);
>  	regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
>  
>  	regloc += PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET;
>  	regblocks = (regloc_size - PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET) / 8;
>  
> -	for (i = 0, n_maps = 0; i < regblocks; i++, regloc += 8) {
> +	for (i = 0; i < regblocks; i++, regloc += 8) {
>  		u32 reg_lo, reg_hi;
>  
>  		pci_read_config_dword(pdev, regloc, &reg_lo);
>  		pci_read_config_dword(pdev, regloc + 4, &reg_hi);
>  
> -		map = &maps[n_maps];
>  		cxl_decode_regblock(reg_lo, reg_hi, map);
>  
> -		/* Ignore unknown register block types */
> -		if (map->reg_type > CXL_REGLOC_RBI_MEMDEV)
> -			continue;
> +		if (map->reg_type == type)
> +			return 0;
> +	}
>  
> -		ret = cxl_map_regblock(pdev, map);
> -		if (ret)
> -			return ret;
> +	return -ENODEV;
> +}
>  
> -		ret = cxl_probe_regs(pdev, map);
> -		cxl_unmap_regblock(pdev, map);
> -		if (ret)
> -			return ret;
> +static int cxl_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type,
> +			  struct cxl_register_map *map)
> +{
> +	int rc;
>  
> -		n_maps++;
> -	}
> +	rc = cxl_find_regblock(pdev, type, map);
> +	if (rc)
> +		return rc;
>  
> -	for (i = 0; i < n_maps; i++) {
> -		ret = cxl_map_regs(cxlm, &maps[i]);
> -		if (ret)
> -			break;
> -	}
> +	rc = cxl_map_regblock(pdev, map);
> +	if (rc)
> +		return rc;
> +
> +	rc = cxl_probe_regs(pdev, map);
> +	cxl_unmap_regblock(pdev, map);
>  
> -	return ret;
> +	return rc;
>  }
>  
>  static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  {
> +	struct cxl_register_map map;
>  	struct cxl_memdev *cxlmd;
>  	struct cxl_mem *cxlm;
>  	int rc;
> @@ -518,7 +515,11 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	if (IS_ERR(cxlm))
>  		return PTR_ERR(cxlm);
>  
> -	rc = cxl_pci_setup_regs(cxlm);
> +	rc = cxl_setup_regs(pdev, CXL_REGLOC_RBI_MEMDEV, &map);
> +	if (rc)
> +		return rc;
> +
> +	rc = cxl_map_regs(cxlm, &map);
>  	if (rc)
>  		return rc;
>  
> 


  parent reply	other threads:[~2021-10-15 16:45 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-09 16:43 [PATCH v3 00/10] cxl_pci refactor for reusability Dan Williams
2021-10-09 16:44 ` [PATCH v3 01/10] cxl/pci: Convert register block identifiers to an enum Dan Williams
2021-10-09 16:44 ` [PATCH v3 02/10] cxl/pci: Remove dev_dbg for unknown register blocks Dan Williams
2021-10-09 16:48   ` Joe Perches
2021-10-09 18:04     ` Ben Widawsky
2021-10-09 16:44 ` [PATCH v3 03/10] cxl/pci: Fix NULL vs ERR_PTR confusion Dan Williams
2021-10-10  3:44   ` Ira Weiny
2021-10-15 16:15   ` Jonathan Cameron
2021-10-15 20:16     ` Dan Williams
2021-10-15 21:29   ` [PATCH v6 " Dan Williams
2021-10-09 16:44 ` [PATCH v3 04/10] cxl/pci: Remove pci request/release regions Dan Williams
2021-10-09 16:44 ` [PATCH v3 05/10] cxl/pci: Make more use of cxl_register_map Dan Williams
2021-10-09 19:04   ` kernel test robot
2021-10-09 20:51   ` [PATCH v4 " Dan Williams
2021-10-10  4:03     ` Ira Weiny
2021-10-13 23:53     ` [PATCH v5 " Dan Williams
2021-10-09 16:44 ` [PATCH v3 06/10] cxl/pci: Add @base to cxl_register_map Dan Williams
2021-10-10  4:20   ` Ira Weiny
2021-10-13 22:53     ` Dan Williams
2021-10-15 16:29       ` Jonathan Cameron
2021-10-15 16:56         ` Dan Williams
2021-10-13 23:57   ` [PATCH v5 " Dan Williams
2021-10-15 21:57     ` [PATCH v6 " Dan Williams
2021-10-18  9:30       ` Jonathan Cameron
2021-10-15 16:27   ` [PATCH v3 " Jonathan Cameron
2021-10-15 16:55     ` Dan Williams
2021-10-18  9:30       ` Jonathan Cameron
2021-10-09 16:44 ` [PATCH v3 07/10] cxl/pci: Split cxl_pci_setup_regs() Dan Williams
2021-10-10  4:44   ` Ira Weiny
2021-10-13 22:45   ` Ben Widawsky
2021-10-13 22:49     ` Dan Williams
2021-10-14  0:12       ` Ben Widawsky
2021-10-14  0:48         ` Dan Williams
2021-10-15 16:44   ` Jonathan Cameron [this message]
2021-10-15 17:00     ` Dan Williams
2021-10-15 23:30   ` [PATCH v6 " Dan Williams
2021-11-10 17:14     ` Jonathan Cameron
2021-11-10 17:30       ` Ben Widawsky
2021-11-10 17:43         ` Jonathan Cameron
2021-10-09 16:44 ` [PATCH v3 08/10] PCI: Add pci_find_dvsec_capability to find designated VSEC Dan Williams
2021-10-09 16:44 ` [PATCH v3 09/10] cxl/pci: Use pci core's DVSEC functionality Dan Williams
2021-10-11 13:35   ` Jonathan Cameron
2021-10-09 16:44 ` [PATCH v3 10/10] ocxl: " Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211015174433.0000368a@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=ben.widawsky@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=hch@lst.de \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox