From: David Lechner <david@lechnology.com>
To: linux-iio@vger.kernel.org
Cc: David Lechner <david@lechnology.com>,
William Breathitt Gray <vilhelm.gray@gmail.com>,
Robert Nelson <robertcnelson@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/8] docs: counter: add latch_mode and latched_count sysfs attributes
Date: Sat, 16 Oct 2021 20:33:41 -0500 [thread overview]
Message-ID: <20211017013343.3385923-7-david@lechnology.com> (raw)
In-Reply-To: <20211017013343.3385923-1-david@lechnology.com>
This documents new counterX/latch_mode* and
counterX/countY/latched_count* attributes.
The counterX/signalY/*_available are moved to the
counterX/countY/*_available section similar to the way we already have
The counterX/*_component_id and The counterX/signalY/*_component_id
grouped together so that we don't have to start a 3rd redundant section
for device-level *_available section.
Signed-off-by: David Lechner <david@lechnology.com>
---
Documentation/ABI/testing/sysfs-bus-counter | 39 ++++++++++++++++-----
1 file changed, 30 insertions(+), 9 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 37d960a8cb1b..78bb1a501007 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -59,10 +59,13 @@ What: /sys/bus/counter/devices/counterX/countY/error_noise_available
What: /sys/bus/counter/devices/counterX/countY/function_available
What: /sys/bus/counter/devices/counterX/countY/prescaler_available
What: /sys/bus/counter/devices/counterX/countY/signalZ_action_available
+What: /sys/bus/counter/devices/counterX/latch_mode_available
+What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available
+What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
Description:
- Discrete set of available values for the respective Count Y
+ Discrete set of available values for the respective component
configuration are listed in this file. Values are delimited by
newline characters.
@@ -147,6 +150,14 @@ Description:
updates the respective count. Quadrature encoding
determines the direction.
+What: /sys/bus/counter/devices/counterX/countY/latched_count
+KernelVersion: 5.16
+Contact: linux-iio@vger.kernel.org
+Description:
+ Latched count data of Count Y represented as a string. The value
+ is latched in based on the trigger selected by the
+ counterX/latch_mode attribute.
+
What: /sys/bus/counter/devices/counterX/countY/name
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -209,6 +220,7 @@ What: /sys/bus/counter/devices/counterX/countY/count_mode_component_id
What: /sys/bus/counter/devices/counterX/countY/direction_component_id
What: /sys/bus/counter/devices/counterX/countY/enable_component_id
What: /sys/bus/counter/devices/counterX/countY/error_noise_component_id
+What: /sys/bus/counter/devices/counterX/countY/latched_count_component_id
What: /sys/bus/counter/devices/counterX/countY/prescaler_component_id
What: /sys/bus/counter/devices/counterX/countY/preset_component_id
What: /sys/bus/counter/devices/counterX/countY/preset_enable_component_id
@@ -218,6 +230,7 @@ What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
What: /sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
+What: /sys/bus/counter/devices/latch_mode_component_id
What: /sys/bus/counter/devices/unit_timer_enable_component_id
What: /sys/bus/counter/devices/unit_timer_period_component_id
What: /sys/bus/counter/devices/unit_timer_time_component_id
@@ -244,6 +257,22 @@ Description:
counter_event data structures. The number of elements will be
rounded-up to a power of 2.
+What: /sys/bus/counter/devices/counterX/latch_mode
+KernelVersion: 5.16
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write attribute that selects the trigger for latching
+ values. Valid values are device-specific (given by
+ latch_mode_available attribute) and may include:
+
+ "Read count":
+ Reading the countY/count attribute latches values.
+
+ "Unit timeout":
+ Unit timer timeout event latches values.
+
+ The latched values can be read from latched_* attributes.
+
What: /sys/bus/counter/devices/counterX/name
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -298,14 +327,6 @@ Description:
Active level of index input Signal Y; irrelevant in
non-synchronous load mode.
-What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available
-What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
-KernelVersion: 5.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Discrete set of available values for the respective Signal Y
- configuration are listed in this file.
-
What: /sys/bus/counter/devices/counterX/signalY/name
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
--
2.25.1
next prev parent reply other threads:[~2021-10-17 1:56 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-17 1:33 [PATCH 0/8] counter: ti-eqep: implement features for speed measurement David Lechner
2021-10-17 1:33 ` [PATCH 1/8] counter/ti-eqep: implement over/underflow events David Lechner
2021-10-17 11:10 ` Jonathan Cameron
2021-10-25 7:13 ` William Breathitt Gray
2021-10-27 15:23 ` David Lechner
2021-10-28 6:41 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 2/8] counter/ti-eqep: add support for direction David Lechner
2021-10-17 11:11 ` Jonathan Cameron
2021-10-25 7:29 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 3/8] counter/ti-eqep: add support for unit timer David Lechner
2021-10-17 11:20 ` Jonathan Cameron
2021-10-25 8:48 ` William Breathitt Gray
2021-10-27 15:28 ` David Lechner
2021-10-28 7:48 ` William Breathitt Gray
2021-10-28 13:42 ` David Lechner
2021-10-30 8:35 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 4/8] docs: counter: add unit timer sysfs attributes David Lechner
2021-10-17 11:23 ` Jonathan Cameron
2021-10-27 6:46 ` William Breathitt Gray
2021-10-27 15:30 ` David Lechner
2021-10-28 7:59 ` William Breathitt Gray
2021-10-30 16:40 ` David Lechner
2021-11-01 4:08 ` William Breathitt Gray
2021-11-01 5:27 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 5/8] counter/ti-eqep: add support for latched position David Lechner
2021-10-27 7:44 ` William Breathitt Gray
2021-10-27 15:40 ` David Lechner
2021-10-28 8:12 ` William Breathitt Gray
2021-10-17 1:33 ` David Lechner [this message]
2021-10-17 11:26 ` [PATCH 6/8] docs: counter: add latch_mode and latched_count sysfs attributes Jonathan Cameron
2021-10-27 7:54 ` William Breathitt Gray
2021-10-27 17:00 ` David Lechner
2021-10-30 1:32 ` William Breathitt Gray
2021-10-30 14:39 ` Jonathan Cameron
2021-11-01 5:11 ` William Breathitt Gray
2021-10-17 1:33 ` [PATCH 7/8] counter/ti-eqep: add support for edge capture unit David Lechner
2021-10-17 11:29 ` Jonathan Cameron
2021-10-27 8:23 ` William Breathitt Gray
2021-10-27 17:28 ` David Lechner
2021-10-17 1:33 ` [PATCH 8/8] docs: counter: add edge_capture_unit_* attributes David Lechner
2021-10-27 8:26 ` William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211017013343.3385923-7-david@lechnology.com \
--to=david@lechnology.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robertcnelson@gmail.com \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox