[PATCH 5.10 087/103] spi: bcm-qspi: clear MSPI spifie interrupt during probe

Greg Kroah-Hartman
2021-10-18T13:48:11Z

From: Kamal Dasu <kdasu@broadcom.com>

commit 75b3cb97eb1f05042745c0655a7145b0262d4c5c upstream.

Intermittent Kernel crash has been observed on probe in
bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit
has not been cleared before registering for interrupts.
Fix the driver to move SoC specific custom interrupt handling code
before we register IRQ in probe. Also clear MSPI interrupt status
resgiter prior to registering IRQ handlers.

Fixes: cc20a38612db ("spi: iproc-qspi: Add Broadcom iProc SoCs support")
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/spi/spi-bcm-qspi.c | 77 ++++++++++++++++++++++++++-------------------
1 file changed, 45 insertions(+), 32 deletions(-)

--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_

static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
{
+ u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
+
bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
if (has_bspi(qspi))
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);

+ /* clear interrupt */
+ bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1);
}

static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
@@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_devic
if (!qspi->dev_ids)
return -ENOMEM;

+ /*
+ * Some SoCs integrate spi controller (e.g., its interrupt bits)
+ * in specific ways
+ */
+ if (soc_intc) {
+ qspi->soc_intc = soc_intc;
+ soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
+ } else {
+ qspi->soc_intc = NULL;
+ }
+
+ if (qspi->clk) {
+ ret = clk_prepare_enable(qspi->clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare clock\n");
+ goto qspi_probe_err;
+ }
+ qspi->base_clk = clk_get_rate(qspi->clk);
+ } else {
+ qspi->base_clk = MSPI_BASE_FREQ;
+ }
+
+ if (data->has_mspi_rev) {
+ rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+ /* some older revs do not have a MSPI_REV register */
+ if ((rev & 0xff) == 0xff)
+ rev = 0;
+ }
+
+ qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+ qspi->mspi_min_rev = rev & 0xf;
+ qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
+
+ qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
+
+ /*
+ * On SW resets it is possible to have the mask still enabled
+ * Need to disable the mask and clear the status while we init
+ */
+ bcm_qspi_hw_uninit(qspi);
+
for (val = 0; val < num_irqs; val++) {
irq = -1;
name = qspi_irq_tab[val].irq_name;
@@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_devic
goto qspi_probe_err;
}

- /*
- * Some SoCs integrate spi controller (e.g., its interrupt bits)
- * in specific ways
- */
- if (soc_intc) {
- qspi->soc_intc = soc_intc;
- soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
- } else {
- qspi->soc_intc = NULL;
- }
-
- ret = clk_prepare_enable(qspi->clk);
- if (ret) {
- dev_err(dev, "failed to prepare clock\n");
- goto qspi_probe_err;
- }
-
- qspi->base_clk = clk_get_rate(qspi->clk);
-
- if (data->has_mspi_rev) {
- rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
- /* some older revs do not have a MSPI_REV register */
- if ((rev & 0xff) == 0xff)
- rev = 0;
- }
-
- qspi->mspi_maj_rev = (rev >> 4) & 0xf;
- qspi->mspi_min_rev = rev & 0xf;
- qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
-
- qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
-
bcm_qspi_hw_init(qspi);
init_completion(&qspi->mspi_done);
init_completion(&qspi->bspi_done);