From: Tim Gardner <tim.gardner@canonical.com>
To: netdev@vger.kernel.org
Cc: Tim Gardner <tim.gardner@canonical.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Roy Pledge <Roy.Pledge@nxp.com>, Li Yang <leoyang.li@nxp.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2][net-next] soc: fsl: dpio: Unsigned compared against 0 in qbman_swp_set_irq_coalescing()
Date: Tue, 19 Oct 2021 06:19:25 -0600 [thread overview]
Message-ID: <20211019121925.8910-1-tim.gardner@canonical.com> (raw)
Coverity complains of unsigned compare against 0. There are 2 cases in
this function:
1821 itp = (irq_holdoff * 1000) / p->desc->qman_256_cycles_per_ns;
CID 121131 (#1 of 1): Unsigned compared against 0 (NO_EFFECT)
unsigned_compare: This less-than-zero comparison of an unsigned value is never true. itp < 0U.
1822 if (itp < 0 || itp > 4096) {
1823 max_holdoff = (p->desc->qman_256_cycles_per_ns * 4096) / 1000;
1824 pr_err("irq_holdoff must be between 0..%dus\n", max_holdoff);
1825 return -EINVAL;
1826 }
1827
unsigned_compare: This less-than-zero comparison of an unsigned value is never true. irq_threshold < 0U.
1828 if (irq_threshold >= p->dqrr.dqrr_size || irq_threshold < 0) {
1829 pr_err("irq_threshold must be between 0..%d\n",
1830 p->dqrr.dqrr_size - 1);
1831 return -EINVAL;
1832 }
Fix this by removing the comparisons altogether as they are incorrect. Zero is
a possible value in either case. Also fix a minor comment typo and update the
2 pr_err() calls to use %u formatting as well as be more precise regarding
the exact error.
Fixes: ed1d2143fee5 ("soc: fsl: dpio: add support for irq coalescing per software portal")
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Roy Pledge <Roy.Pledge@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
---
v1 - check itp and irq_threshold for 0.
v2 - drop the checks for comparison to 0. Update pr_err() calls with precise language
about the error.
---
drivers/soc/fsl/dpio/qbman-portal.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/soc/fsl/dpio/qbman-portal.c b/drivers/soc/fsl/dpio/qbman-portal.c
index d3c58df6240d..3474bf5f88d5 100644
--- a/drivers/soc/fsl/dpio/qbman-portal.c
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -1816,18 +1816,17 @@ int qbman_swp_set_irq_coalescing(struct qbman_swp *p, u32 irq_threshold,
u32 itp, max_holdoff;
/* Convert irq_holdoff value from usecs to 256 QBMAN clock cycles
- * increments. This depends to the QBMAN internal frequency.
+ * increments. This depends on the QBMAN internal frequency.
*/
itp = (irq_holdoff * 1000) / p->desc->qman_256_cycles_per_ns;
- if (itp < 0 || itp > 4096) {
+ if (itp > 4096) {
max_holdoff = (p->desc->qman_256_cycles_per_ns * 4096) / 1000;
- pr_err("irq_holdoff must be between 0..%dus\n", max_holdoff);
+ pr_err("irq_holdoff must be <= %uus\n", max_holdoff);
return -EINVAL;
}
- if (irq_threshold >= p->dqrr.dqrr_size || irq_threshold < 0) {
- pr_err("irq_threshold must be between 0..%d\n",
- p->dqrr.dqrr_size - 1);
+ if (irq_threshold >= p->dqrr.dqrr_size) {
+ pr_err("irq_threshold must be < %u\n", p->dqrr.dqrr_size - 1);
return -EINVAL;
}
--
2.33.1
next reply other threads:[~2021-10-19 12:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-19 12:19 Tim Gardner [this message]
2021-10-19 18:39 ` [PATCH v2][net-next] soc: fsl: dpio: Unsigned compared against 0 in qbman_swp_set_irq_coalescing() Ioana Ciornei
2021-10-20 13:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211019121925.8910-1-tim.gardner@canonical.com \
--to=tim.gardner@canonical.com \
--cc=Roy.Pledge@nxp.com \
--cc=ioana.ciornei@nxp.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox