public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Maíra Canal" <maira.canal@usp.br>
Cc: hongxing.zhu@nxp.com, l.stach@pengutronix.de,
	lorenzo.pieralisi@arm.com, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pci-imx6: replacing legacy gpio interface for gpiod
Date: Tue, 19 Oct 2021 14:45:45 -0500	[thread overview]
Message-ID: <20211019194545.GA2393463@bhelgaas> (raw)
In-Reply-To: <YW7jvR/2jpAwSpvd@fedora>

[fixed "linux-pci@vger.kernel.org" in cc]

On Tue, Oct 19, 2021 at 12:26:53PM -0300, Maíra Canal wrote:
> Removing all dependencies of linux/gpio.h and linux/of_gpio.h and replacing
> it with linux/gpio/consumer.h

Run "git log --oneline drivers/pci/controller/dwc/pci-imx6.c" and make
your subject line match -- capitalization, sentence structure, etc.

Write commit log in imperative mood, i.e., "Remove" instead of
"Removing": https://chris.beams.io/posts/git-commit/

The commit log mentions the trivial part but omits the important part
(converting from gpio to gpiod model).

> Signed-off-by: Maíra Canal <maira.canal@usp.br>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++-----------------
>  1 file changed, 11 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 80fc98acf097..e5ee54e37d05 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -11,13 +11,12 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/kernel.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>  #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
>  #include <linux/module.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_device.h>
>  #include <linux/of_address.h>
>  #include <linux/pci.h>
> @@ -63,7 +62,7 @@ struct imx6_pcie_drvdata {
>  
>  struct imx6_pcie {
>  	struct dw_pcie		*pci;
> -	int			reset_gpio;
> +	struct gpio_desc    *reset_gpio;
>  	bool			gpio_active_high;
>  	struct clk		*pcie_bus;
>  	struct clk		*pcie_phy;
> @@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  	usleep_range(200, 500);
>  
>  	/* Some boards don't have PCIe reset GPIO. */
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> +	if (imx6_pcie->reset_gpio) {
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
>  					imx6_pcie->gpio_active_high);
>  		msleep(100);
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
>  					!imx6_pcie->gpio_active_high);
>  	}
>  
> @@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  		return PTR_ERR(pci->dbi_base);
>  
>  	/* Fetch GPIOs */
> -	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
>  	imx6_pcie->gpio_active_high = of_property_read_bool(node,
>  						"reset-gpio-active-high");
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> -				imx6_pcie->gpio_active_high ?
> -					GPIOF_OUT_INIT_HIGH :
> -					GPIOF_OUT_INIT_LOW,
> -				"PCIe reset");
> -		if (ret) {
> -			dev_err(dev, "unable to get reset gpio\n");
> -			return ret;
> -		}
> -	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> -		return imx6_pcie->reset_gpio;
> -	}
> +	imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +			imx6_pcie->gpio_active_high ?  GPIOD_OUT_HIGH :
> +				GPIOD_OUT_LOW);
> +	if (IS_ERR(imx6_pcie->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio),
> +					  "unable to get reset gpio\n");
>  
>  	/* Fetch clocks */
>  	imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
> -- 
> 2.31.1
> 

  reply	other threads:[~2021-10-19 19:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-19 15:26 [PATCH] pci-imx6: replacing legacy gpio interface for gpiod Maíra Canal
2021-10-19 19:45 ` Bjorn Helgaas [this message]
2021-10-20 12:02   ` Maíra Canal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211019194545.GA2393463@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=festevam@gmail.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maira.canal@usp.br \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox