From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D7BBBC433F5 for ; Wed, 20 Oct 2021 16:42:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B84C960EB1 for ; Wed, 20 Oct 2021 16:42:28 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230368AbhJTQok (ORCPT ); Wed, 20 Oct 2021 12:44:40 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54424 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230283AbhJTQog (ORCPT ); Wed, 20 Oct 2021 12:44:36 -0400 Received: from mail-yb1-xb49.google.com (mail-yb1-xb49.google.com [IPv6:2607:f8b0:4864:20::b49]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 934FEC06161C for ; Wed, 20 Oct 2021 09:42:21 -0700 (PDT) Received: by mail-yb1-xb49.google.com with SMTP id b197-20020a2534ce000000b005b71a4e189eso31648954yba.5 for ; Wed, 20 Oct 2021 09:42:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20210112; h=date:in-reply-to:message-id:mime-version:references:subject:from:to :cc; bh=IHLUn7sE+CWeyJGwUt9Fg19fE4IBXhW7HDVWDJnGVsY=; b=o0P6AGlO1B1cvFuR8WzDFCSvpRXabsmrwPyKL0Rg68XwoiYSjnqkvjC09iEWxT7sxg sMUHvv3aTwwBEbpDCFyYI8l/QVinPngzdqzpGDHMXy6ftOtYwF+qCoF8FklsTEuexEI9 0XmxohZlfdkS4x+1/mCd5enIImH3uwUeF22j7jrCqmmJDxbPlcYT9k8wYq7oMvfpOS7G mlDE/NxvoMTS2U8wy18xfLKnQQL+ovFNLq1bwIU+Us4L3K6/qoEhnRYu8UzFxxpz0LkJ 1808Lzp4IslAwb4WOP/VPwdgKQ32bbJ93liWFhpUeECzQa+HBKNXVNXFerD/cpFVmA8W AuDw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:in-reply-to:message-id:mime-version :references:subject:from:to:cc; bh=IHLUn7sE+CWeyJGwUt9Fg19fE4IBXhW7HDVWDJnGVsY=; b=UdnKRFlJptCH0RV4D8yrPFTV4Xi5FSQrlGS3RwApF8apjcNGA6yqLOZHRdwf9g/51X 1uun/fGqKRn6FLZ0jNEX8PoTtDLa6+HQe1RfW8kTlVcxxpfggwd3xyoRqzItg8eKEfka clKHbwI+lFkU4VNO0yMOELrSIWhfxPIwk6W8KU6tu+T4MQpovaKGb5tFlZKd27aMVCVa U0ffVSgLWuuzf2Ma1jvK5m1mNGMHcE4bXuhnofDY6FFV6YDWPPNOIYJxTvy8A3yAE+3Y pjVk6zcR8tjcV2l05FpD8Hhwx3EzivTVXqwssescKzJpVc2wBT1qGxvyDrk7ZLX6T43r 2shw== X-Gm-Message-State: AOAM530y4cvak9LnKJ/TLHQQv12xlVI1kvNTH0LeeQKfAKyRttS6SzB4 05Gq0NO7yAQaUQrjM9gsHHx2TH4= X-Google-Smtp-Source: ABdhPJz5iTmijp1jngJ7qyzAn/XVSTjtv9vToNoDNnjqGwNYbfVS3QF++s8/rYPSOo7hJi81ne7jEWs= X-Received: from osk.cam.corp.google.com ([2620:0:1004:1a:a607:1490:fbbf:43bc]) (user=osk job=sendgmr) by 2002:a25:cb03:: with SMTP id b3mr155435ybg.138.1634748140825; Wed, 20 Oct 2021 09:42:20 -0700 (PDT) Date: Wed, 20 Oct 2021 12:42:13 -0400 In-Reply-To: <20211020164213.174597-1-osk@google.com> Message-Id: <20211020164213.174597-2-osk@google.com> Mime-Version: 1.0 References: <20211020164213.174597-1-osk@google.com> X-Mailer: git-send-email 2.33.0.1079.g6e70778dc9-goog Subject: [PATCH v8 2/2] hwmon: (nct7802) Make temperature/voltage sensors configurable From: Oskar Senft To: Jean Delvare , Guenter Roeck , Rob Herring , linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Oskar Senft Content-Type: text/plain; charset="UTF-8" Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This change allows LTD and RTD inputs to be configured via device tree bindings. If the DT bindings are not present or invalid, the input configuration is not modified and left at HW defaults. Signed-off-by: Oskar Senft Reviewed-by: Guenter Roeck --- Changes from PATCH v6 and v7: - None (resubmitted due to changes in nuvoton,nct7802.yaml). Changes from PATCH v5: - Removed unused "found_channel_config" variable. - Initialize mode_mask and mode_val to defaults. --- drivers/hwmon/nct7802.c | 129 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 125 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c index 604af2f6103a..d56f78327619 100644 --- a/drivers/hwmon/nct7802.c +++ b/drivers/hwmon/nct7802.c @@ -51,6 +51,23 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = { #define REG_CHIP_ID 0xfe #define REG_VERSION_ID 0xff +/* + * Resistance temperature detector (RTD) modes according to 7.2.32 Mode + * Selection Register + */ +#define RTD_MODE_CURRENT 0x1 +#define RTD_MODE_THERMISTOR 0x2 +#define RTD_MODE_VOLTAGE 0x3 + +#define MODE_RTD_MASK 0x3 +#define MODE_LTD_EN 0x40 + +/* + * Bit offset for sensors modes in REG_MODE. + * Valid for index 0..2, indicating RTD1..3. + */ +#define MODE_BIT_OFFSET_RTD(index) ((index) * 2) + /* * Data structures and manipulation thereof */ @@ -1038,7 +1055,112 @@ static const struct regmap_config nct7802_regmap_config = { .volatile_reg = nct7802_regmap_is_volatile, }; -static int nct7802_init_chip(struct nct7802_data *data) +static int nct7802_get_channel_config(struct device *dev, + struct device_node *node, u8 *mode_mask, + u8 *mode_val) +{ + u32 reg; + const char *type_str, *md_str; + u8 md; + + if (!node->name || of_node_cmp(node->name, "channel")) + return 0; + + if (of_property_read_u32(node, "reg", ®)) { + dev_err(dev, "Could not read reg value for '%s'\n", + node->full_name); + return -EINVAL; + } + + if (reg > 3) { + dev_err(dev, "Invalid reg (%u) in '%s'\n", reg, + node->full_name); + return -EINVAL; + } + + if (reg == 0) { + if (!of_device_is_available(node)) + *mode_val &= ~MODE_LTD_EN; + else + *mode_val |= MODE_LTD_EN; + *mode_mask |= MODE_LTD_EN; + return 0; + } + + /* At this point we have reg >= 1 && reg <= 3 */ + + if (!of_device_is_available(node)) { + *mode_val &= ~(MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1)); + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1); + return 0; + } + + if (of_property_read_string(node, "sensor-type", &type_str)) { + dev_err(dev, "No type for '%s'\n", node->full_name); + return -EINVAL; + } + + if (!strcmp(type_str, "voltage")) { + *mode_val |= (RTD_MODE_VOLTAGE & MODE_RTD_MASK) + << MODE_BIT_OFFSET_RTD(reg - 1); + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1); + return 0; + } + + if (strcmp(type_str, "temperature")) { + dev_err(dev, "Invalid type '%s' for '%s'\n", type_str, + node->full_name); + return -EINVAL; + } + + if (reg == 3) { + /* RTD3 only supports thermistor mode */ + md = RTD_MODE_THERMISTOR; + } else { + if (of_property_read_string(node, "temperature-mode", + &md_str)) { + dev_err(dev, "No mode for '%s'\n", node->full_name); + return -EINVAL; + } + + if (!strcmp(md_str, "thermal-diode")) + md = RTD_MODE_CURRENT; + else if (!strcmp(md_str, "thermistor")) + md = RTD_MODE_THERMISTOR; + else { + dev_err(dev, "Invalid mode '%s' for '%s'\n", md_str, + node->full_name); + return -EINVAL; + } + } + + *mode_val |= (md & MODE_RTD_MASK) << MODE_BIT_OFFSET_RTD(reg - 1); + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1); + + return 0; +} + +static int nct7802_configure_channels(struct device *dev, + struct nct7802_data *data) +{ + /* Enable local temperature sensor by default */ + u8 mode_mask = MODE_LTD_EN, mode_val = MODE_LTD_EN; + struct device_node *node; + int err; + + if (dev->of_node) { + for_each_child_of_node(dev->of_node, node) { + err = nct7802_get_channel_config(dev, node, &mode_mask, + &mode_val); + if (err) + return err; + } + } + + return regmap_update_bits(data->regmap, REG_MODE, mode_mask, mode_val); +} + +static int nct7802_init_chip(struct device *dev, struct nct7802_data *data) { int err; @@ -1047,8 +1169,7 @@ static int nct7802_init_chip(struct nct7802_data *data) if (err) return err; - /* Enable local temperature sensor */ - err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40); + err = nct7802_configure_channels(dev, data); if (err) return err; @@ -1074,7 +1195,7 @@ static int nct7802_probe(struct i2c_client *client) mutex_init(&data->access_lock); mutex_init(&data->in_alarm_lock); - ret = nct7802_init_chip(data); + ret = nct7802_init_chip(dev, data); if (ret < 0) return ret; -- 2.33.0.1079.g6e70778dc9-goog