[PATCH 5.14 158/169] drm/kmb: Enable alpha blended second plane

Greg Kroah-Hartman
2021-10-25T19:59:00Z

From: Edmund Dea <edmund.j.dea@intel.com>

[ Upstream commit c026565fe9be813fe826f7e5533ed763283af5f0 ]

Enable one additional plane that is alpha blended on top
of the primary plane.

This also fixes the below warnings when building with
-Warray-bounds:

drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]
drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is
above array bounds of 'struct layer_status[1]' [-Warray-bounds]

v2: corrected previous patch dependecies so it builds

Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@intel.com/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/kmb/kmb_drv.c | 8 ++--
drivers/gpu/drm/kmb/kmb_drv.h | 5 ++
drivers/gpu/drm/kmb/kmb_plane.c | 81 +++++++++++++++++++++++++++++----
drivers/gpu/drm/kmb/kmb_plane.h | 5 +-
drivers/gpu/drm/kmb/kmb_regs.h | 3 ++
5 files changed, 87 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c
index bb7eca9e13ae..d3091bf38cc0 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.c
+++ b/drivers/gpu/drm/kmb/kmb_drv.c
@@ -173,10 +173,10 @@ static int kmb_setup_mode_config(struct drm_device *drm)
ret = drmm_mode_config_init(drm);
if (ret)
return ret;
- drm->mode_config.min_width = KMB_MIN_WIDTH;
- drm->mode_config.min_height = KMB_MIN_HEIGHT;
- drm->mode_config.max_width = KMB_MAX_WIDTH;
- drm->mode_config.max_height = KMB_MAX_HEIGHT;
+ drm->mode_config.min_width = KMB_FB_MIN_WIDTH;
+ drm->mode_config.min_height = KMB_FB_MIN_HEIGHT;
+ drm->mode_config.max_width = KMB_FB_MAX_WIDTH;
+ drm->mode_config.max_height = KMB_FB_MAX_HEIGHT;
drm->mode_config.funcs = &kmb_mode_config_funcs;

ret = kmb_setup_crtc(drm);
diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h
index 178aa14f2efc..5869890b8fc7 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.h
+++ b/drivers/gpu/drm/kmb/kmb_drv.h
@@ -20,6 +20,11 @@
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 1

+#define KMB_FB_MAX_WIDTH 1920
+#define KMB_FB_MAX_HEIGHT 1080
+#define KMB_FB_MIN_WIDTH 1
+#define KMB_FB_MIN_HEIGHT 1
+
#define KMB_LCD_DEFAULT_CLK 200000000
#define KMB_SYS_CLK_MHZ 500

diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index 45cb096455b5..00404ba4126d 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -113,9 +113,10 @@ static int kmb_plane_atomic_check(struct drm_plane *plane,
if (ret)
return ret;

- if (new_plane_state->crtc_w > KMB_MAX_WIDTH || new_plane_state->crtc_h > KMB_MAX_HEIGHT)
- return -EINVAL;
- if (new_plane_state->crtc_w < KMB_MIN_WIDTH || new_plane_state->crtc_h < KMB_MIN_HEIGHT)
+ if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH ||
+ new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT ||
+ new_plane_state->crtc_w < KMB_FB_MIN_WIDTH ||
+ new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT)
return -EINVAL;

/* Due to HW limitations, changing plane height or width after
@@ -306,6 +307,44 @@ static void config_csc(struct kmb_drm_private *kmb, int plane_id)
kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]);
}

+static void kmb_plane_set_alpha(struct kmb_drm_private *kmb,
+ const struct drm_plane_state *state,
+ unsigned char plane_id,
+ unsigned int *val)
+{
+ u16 plane_alpha = state->alpha;
+ u16 pixel_blend_mode = state->pixel_blend_mode;
+ int has_alpha = state->fb->format->has_alpha;
+
+ if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE)
+ *val |= LCD_LAYER_ALPHA_STATIC;
+
+ if (has_alpha) {
+ switch (pixel_blend_mode) {
+ case DRM_MODE_BLEND_PIXEL_NONE:
+ break;
+ case DRM_MODE_BLEND_PREMULTI:
+ *val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT;
+ break;
+ case DRM_MODE_BLEND_COVERAGE:
+ *val |= LCD_LAYER_ALPHA_EMBED;
+ break;
+ default:
+ DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n",
+ __stringify(pixel_blend_mode),
+ (long)pixel_blend_mode);
+ break;
+ }
+ }
+
+ if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) {
+ *val &= LCD_LAYER_ALPHA_DISABLED;
+ return;
+ }
+
+ kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha);
+}
+
static void kmb_plane_atomic_update(struct drm_plane *plane,
struct drm_atomic_state *state)
{
@@ -333,11 +372,12 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
fb = new_plane_state->fb;
if (!fb)
return;
+
num_planes = fb->format->num_planes;
kmb_plane = to_kmb_plane(plane);
- plane_id = kmb_plane->id;

kmb = to_kmb(plane->dev);
+ plane_id = kmb_plane->id;

spin_lock_irq(&kmb->irq_lock);
if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
@@ -431,20 +471,32 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
config_csc(kmb, plane_id);
}

+ kmb_plane_set_alpha(kmb, plane->state, plane_id, &val);
+
kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val);

+ /* Configure LCD_CONTROL */
+ ctrl = kmb_read_lcd(kmb, LCD_CONTROL);
+
+ /* Set layer blending config */
+ ctrl &= ~LCD_CTRL_ALPHA_ALL;
+ ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 |
+ LCD_CTRL_ALPHA_BLEND_VL2;
+
+ ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE;
+
switch (plane_id) {
case LAYER_0:
- ctrl = LCD_CTRL_VL1_ENABLE;
+ ctrl |= LCD_CTRL_VL1_ENABLE;
break;
case LAYER_1:
- ctrl = LCD_CTRL_VL2_ENABLE;
+ ctrl |= LCD_CTRL_VL2_ENABLE;
break;
case LAYER_2:
- ctrl = LCD_CTRL_GL1_ENABLE;
+ ctrl |= LCD_CTRL_GL1_ENABLE;
break;
case LAYER_3:
- ctrl = LCD_CTRL_GL2_ENABLE;
+ ctrl |= LCD_CTRL_GL2_ENABLE;
break;
}

@@ -456,7 +508,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
*/
ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL;

- kmb_set_bitmask_lcd(kmb, LCD_CONTROL, ctrl);
+ kmb_write_lcd(kmb, LCD_CONTROL, ctrl);

/* Enable pipeline AXI read transactions for the DMA
* after setting graphics layers. This must be done
@@ -531,6 +583,9 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm)
enum drm_plane_type plane_type;
const u32 *plane_formats;
int num_plane_formats;
+ unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+ BIT(DRM_MODE_BLEND_PREMULTI) |
+ BIT(DRM_MODE_BLEND_COVERAGE);

for (i = 0; i < KMB_MAX_PLANES; i++) {
plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL);
@@ -562,8 +617,16 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm)
drm_dbg(drm, "%s : %d i=%d type=%d",
__func__, __LINE__,
i, plane_type);
+ drm_plane_create_alpha_property(&plane->base_plane);
+
+ drm_plane_create_blend_mode_property(&plane->base_plane,
+ blend_caps);
+
+ drm_plane_create_zpos_immutable_property(&plane->base_plane, i);
+
drm_plane_helper_add(&plane->base_plane,
&kmb_plane_helper_funcs);
+
if (plane_type == DRM_PLANE_TYPE_PRIMARY) {
primary = plane;
kmb->plane = plane;
diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h
index 99207b35365c..b51144044fe8 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.h
+++ b/drivers/gpu/drm/kmb/kmb_plane.h
@@ -35,6 +35,9 @@
#define POSSIBLE_CRTCS 1
#define to_kmb_plane(x) container_of(x, struct kmb_plane, base_plane)

+#define POSSIBLE_CRTCS 1
+#define KMB_MAX_PLANES 2
+
enum layer_id {
LAYER_0,
LAYER_1,
@@ -43,8 +46,6 @@ enum layer_id {
/* KMB_MAX_PLANES */
};

-#define KMB_MAX_PLANES 1
-
enum sub_plane_id {
Y_PLANE,
U_PLANE,
diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h
index 48150569f702..9756101b0d32 100644
--- a/drivers/gpu/drm/kmb/kmb_regs.h
+++ b/drivers/gpu/drm/kmb/kmb_regs.h
@@ -43,8 +43,10 @@
#define LCD_CTRL_OUTPUT_ENABLED BIT(19)
#define LCD_CTRL_BPORCH_ENABLE BIT(21)
#define LCD_CTRL_FPORCH_ENABLE BIT(22)
+#define LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE BIT(23)
#define LCD_CTRL_PIPELINE_DMA BIT(28)
#define LCD_CTRL_VHSYNC_IDLE_LVL BIT(31)
+#define LCD_CTRL_ALPHA_ALL (0xff << 6)

/* interrupts */
#define LCD_INT_STATUS (0x4 * 0x001)
@@ -115,6 +117,7 @@
#define LCD_LAYER_ALPHA_EMBED BIT(5)
#define LCD_LAYER_ALPHA_COMBI (LCD_LAYER_ALPHA_STATIC | \
LCD_LAYER_ALPHA_EMBED)
+#define LCD_LAYER_ALPHA_DISABLED ~(LCD_LAYER_ALPHA_COMBI)
/* RGB multiplied with alpha */
#define LCD_LAYER_ALPHA_PREMULT BIT(6)
#define LCD_LAYER_INVERT_COL BIT(7)
--
2.33.0