[PATCH] net: macb: Fix mdio child node detection

[Guenter Roeck <linux@roeck-us.net>]

Commit 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it
exists") added code to detect if a 'mdio' child node exists to the macb
driver. Ths added code does, however, not actually check if the child node
exists, but if the parent node exists. This results in errors such as

macb 10090000.ethernet eth0: Could not attach PHY (-19)

if there is no 'mdio' child node. Fix the code to actually check for
the child node.

Fixes: 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists")
Cc: Sean Anderson <sean.anderson@seco.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/net/ethernet/cadence/macb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 309371abfe23..ffce528aa00e 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -901,7 +901,7 @@ static int macb_mdiobus_register(struct macb *bp)
 	 * directly under the MAC node
 	 */
 	child = of_get_child_by_name(np, "mdio");
-	if (np) {
+	if (child) {
 		int ret = of_mdiobus_register(bp->mii_bus, child);
 
 		of_node_put(child);
-- 
2.33.0