From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Johan Hovold <johan@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>
Subject: [PATCH 4.9 11/20] mmc: vub300: fix control-message timeouts
Date: Mon, 1 Nov 2021 10:17:20 +0100 [thread overview]
Message-ID: <20211101082446.593691986@linuxfoundation.org> (raw)
In-Reply-To: <20211101082444.133899096@linuxfoundation.org>
From: Johan Hovold <johan@kernel.org>
commit 8c8171929116cc23f74743d99251eedadf62341a upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/vub300.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -579,7 +579,7 @@ static void check_vub300_port_status(str
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
- sizeof(vub300->system_port_status), HZ);
+ sizeof(vub300->system_port_status), 1000);
if (sizeof(vub300->system_port_status) == retval)
new_system_port_status(vub300);
}
@@ -1245,7 +1245,7 @@ static void __download_offload_pseudocod
SET_INTERRUPT_PSEUDOCODE,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, 0x0000, 0x0000,
- xfer_buffer, xfer_length, HZ);
+ xfer_buffer, xfer_length, 1000);
kfree(xfer_buffer);
if (retval < 0) {
strncpy(vub300->vub_name,
@@ -1292,7 +1292,7 @@ static void __download_offload_pseudocod
SET_TRANSFER_PSEUDOCODE,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, 0x0000, 0x0000,
- xfer_buffer, xfer_length, HZ);
+ xfer_buffer, xfer_length, 1000);
kfree(xfer_buffer);
if (retval < 0) {
strncpy(vub300->vub_name,
@@ -1998,7 +1998,7 @@ static void __set_clock_speed(struct vub
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_CLOCK_SPEED,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x00, 0x00, buf, buf_array_size, HZ);
+ 0x00, 0x00, buf, buf_array_size, 1000);
if (retval != 8) {
dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
" %dkHz failed with retval=%d\n", kHzClock, retval);
@@ -2020,14 +2020,14 @@ static void vub300_mmc_set_ios(struct mm
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_SD_POWER,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, 0x0000, NULL, 0, HZ);
+ 0x0000, 0x0000, NULL, 0, 1000);
/* must wait for the VUB300 u-proc to boot up */
msleep(600);
} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_SD_POWER,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0001, 0x0000, NULL, 0, HZ);
+ 0x0001, 0x0000, NULL, 0, 1000);
msleep(600);
vub300->card_powered = 1;
} else if (ios->power_mode == MMC_POWER_ON) {
@@ -2288,14 +2288,14 @@ static int vub300_probe(struct usb_inter
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
- sizeof(vub300->hc_info), HZ);
+ sizeof(vub300->hc_info), 1000);
if (retval < 0)
goto error5;
retval =
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+ firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
if (retval < 0)
goto error5;
dev_info(&vub300->udev->dev,
@@ -2310,7 +2310,7 @@ static int vub300_probe(struct usb_inter
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
- sizeof(vub300->system_port_status), HZ);
+ sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
goto error4;
} else if (sizeof(vub300->system_port_status) == retval) {
next prev parent reply other threads:[~2021-11-01 9:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 9:17 [PATCH 4.9 00/20] 4.9.289-rc1 review Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 01/20] ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 02/20] ARM: 9134/1: remove duplicate memcpy() definition Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 03/20] ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 04/20] powerpc/bpf: Fix BPF_MOD when imm == 1 Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 05/20] ARM: 8819/1: Remove -p from LDFLAGS Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 06/20] usbnet: sanity check for maxpacket Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 07/20] usbnet: fix error return code in usbnet_probe() Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 08/20] ata: sata_mv: Fix the error handling of mv_chip_id() Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 09/20] nfc: port100: fix using -ERRNO as command type mask Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 10/20] Revert "net: mdiobus: Fix memory leak in __mdiobus_register" Greg Kroah-Hartman
2021-11-01 9:17 ` Greg Kroah-Hartman [this message]
2021-11-01 9:17 ` [PATCH 4.9 12/20] mmc: dw_mmc: exynos: fix the finding clock sample value Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 13/20] mmc: sdhci: Map more voltage level to SDHCI_POWER_330 Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 14/20] net: lan78xx: fix division by zero in send path Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 15/20] regmap: Fix possible double-free in regcache_rbtree_exit() Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 16/20] net: batman-adv: fix error handling Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 17/20] nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 18/20] net: nxp: lpc_eth.c: avoid hang when bringing interface down Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 19/20] sctp: use init_tag from inithdr for ABORT chunk Greg Kroah-Hartman
2021-11-01 9:17 ` [PATCH 4.9 20/20] sctp: add vtag check in sctp_sf_violation Greg Kroah-Hartman
2021-11-01 21:22 ` [PATCH 4.9 00/20] 4.9.289-rc1 review Shuah Khan
2021-11-01 23:35 ` Guenter Roeck
2021-11-02 8:36 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211101082446.593691986@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox