public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
	<patches@opensource.cirrus.com>,
	Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH v2] ASoC: cs42l42: Add control for audio slow-start switch
Date: Tue, 16 Nov 2021 16:26:45 +0000	[thread overview]
Message-ID: <20211116162652.45225-2-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20211116162652.45225-1-rf@opensource.cirrus.com>

This adds an ALSA control so that the slow-start audio ramp feature
can be disabled. This is useful for high-definition audio applications.

The register field is unusual in that it is a 3-bit field with only
two valid values, 000=off and 111=on.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 sound/soc/codecs/cs42l42.c | 30 +++++++++++++++++++++++++++++-
 sound/soc/codecs/cs42l42.h |  3 +++
 2 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 27a1c4c73074..56804a3f285e 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -42,6 +42,7 @@ static const struct reg_default cs42l42_reg_defaults[] = {
 	{ CS42L42_SRC_CTL,			0x10 },
 	{ CS42L42_MCLK_CTL,			0x02 },
 	{ CS42L42_SFTRAMP_RATE,			0xA4 },
+	{ CS42L42_SLOW_START_ENABLE,		0x70 },
 	{ CS42L42_I2C_DEBOUNCE,			0x88 },
 	{ CS42L42_I2C_STRETCH,			0x03 },
 	{ CS42L42_I2C_TIMEOUT,			0xB7 },
@@ -177,6 +178,7 @@ static bool cs42l42_readable_register(struct device *dev, unsigned int reg)
 	case CS42L42_MCLK_STATUS:
 	case CS42L42_MCLK_CTL:
 	case CS42L42_SFTRAMP_RATE:
+	case CS42L42_SLOW_START_ENABLE:
 	case CS42L42_I2C_DEBOUNCE:
 	case CS42L42_I2C_STRETCH:
 	case CS42L42_I2C_TIMEOUT:
@@ -387,6 +389,28 @@ static const struct regmap_config cs42l42_regmap = {
 static DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 100, true);
 static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
 
+static int cs42l42_slow_start_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	u8 val;
+
+	/* all bits of SLOW_START_EN much change together */
+	switch (ucontrol->value.integer.value[0]) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = CS42L42_SLOW_START_EN_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return snd_soc_component_update_bits(component, CS42L42_SLOW_START_ENABLE,
+					     CS42L42_SLOW_START_EN_MASK, val);
+}
+
 static const char * const cs42l42_hpf_freq_text[] = {
 	"1.86Hz", "120Hz", "235Hz", "466Hz"
 };
@@ -431,7 +455,11 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
 				CS42L42_DAC_HPF_EN_SHIFT, true, false),
 	SOC_DOUBLE_R_TLV("Mixer Volume", CS42L42_MIXER_CHA_VOL,
 			 CS42L42_MIXER_CHB_VOL, CS42L42_MIXER_CH_VOL_SHIFT,
-				0x3f, 1, mixer_tlv)
+				0x3f, 1, mixer_tlv),
+
+	SOC_SINGLE_EXT("Slow Start Switch", CS42L42_SLOW_START_ENABLE,
+			CS42L42_SLOW_START_EN_SHIFT, true, false,
+			snd_soc_get_volsw, cs42l42_slow_start_put),
 };
 
 static int cs42l42_hp_adc_ev(struct snd_soc_dapm_widget *w,
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index f45bcc9a3a62..c8b3267a318b 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -62,6 +62,9 @@
 #define CS42L42_INTERNAL_FS_MASK	(1 << CS42L42_INTERNAL_FS_SHIFT)
 
 #define CS42L42_SFTRAMP_RATE		(CS42L42_PAGE_10 + 0x0A)
+#define CS42L42_SLOW_START_ENABLE	(CS42L42_PAGE_10 + 0x0B)
+#define CS42L42_SLOW_START_EN_MASK	GENMASK(6, 4)
+#define CS42L42_SLOW_START_EN_SHIFT	4
 #define CS42L42_I2C_DEBOUNCE		(CS42L42_PAGE_10 + 0x0E)
 #define CS42L42_I2C_STRETCH		(CS42L42_PAGE_10 + 0x0F)
 #define CS42L42_I2C_TIMEOUT		(CS42L42_PAGE_10 + 0x10)
-- 
2.11.0


  reply	other threads:[~2021-11-16 16:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-16 16:26 [PATCH 0/4] ASoC: cs42l42: Remove redundant code Richard Fitzgerald
2021-11-16 16:26 ` Richard Fitzgerald [this message]
2021-11-16 16:26 ` [PATCH 1/4] ASoC: cs42l42: Remove redundant writes to DETECT_MODE Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 1/3] ASoC: dt-bindings: cs42l42: Correct description of ts-inv Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 2/3] ASoC: cs42l42: Correct configuring of switch inversion from ts-inv Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 2/4] ASoC: cs42l42: Remove redundant writes to RS_PLUG/RS_UNPLUG masks Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 3/4] ASoC: cs42l42: Simplify reporting of jack unplug Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 3/3] ASoC: dt-bindings: cs42l42: Convert binding to yaml Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 4/4] ASoC: cs42l42: Remove redundant pll_divout member Richard Fitzgerald
2021-11-16 16:29 ` [PATCH 0/4] ASoC: cs42l42: Remove redundant code Richard Fitzgerald
  -- strict thread matches above, loose matches on Subject: below --
2021-11-01 10:10 [PATCH v2] ASoC: cs42l42: Add control for audio slow-start switch Richard Fitzgerald
2021-11-15 23:34 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211116162652.45225-2-rf@opensource.cirrus.com \
    --to=rf@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox