From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<patches@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH 1/4] ASoC: cs42l42: Remove redundant writes to DETECT_MODE
Date: Tue, 16 Nov 2021 16:26:46 +0000 [thread overview]
Message-ID: <20211116162652.45225-3-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20211116162652.45225-1-rf@opensource.cirrus.com>
There are multiple places where DETECT_MODE is included in a register
write, but in every case it is written as 0. Removing these redundant
writes makes the code less cluttered and also makes it obvious that
DETECT_MODE is never changed.
A single initialization to 0 is added to cs42l42_setup_hs_type_detect().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
sound/soc/codecs/cs42l42.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 56804a3f285e..92bdc3a355ff 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1270,10 +1270,8 @@ static void cs42l42_process_hs_type_detect(struct cs42l42_private *cs42l42)
/* Turn on level detect circuitry */
regmap_update_bits(cs42l42->regmap,
CS42L42_MISC_DET_CTL,
- CS42L42_DETECT_MODE_MASK |
CS42L42_HSBIAS_CTL_MASK |
CS42L42_PDN_MIC_LVL_DET_MASK,
- (0 << CS42L42_DETECT_MODE_SHIFT) |
(3 << CS42L42_HSBIAS_CTL_SHIFT) |
(0 << CS42L42_PDN_MIC_LVL_DET_SHIFT));
@@ -1300,10 +1298,8 @@ static void cs42l42_process_hs_type_detect(struct cs42l42_private *cs42l42)
/* Make sure button detect and HS bias circuits are off */
regmap_update_bits(cs42l42->regmap,
CS42L42_MISC_DET_CTL,
- CS42L42_DETECT_MODE_MASK |
CS42L42_HSBIAS_CTL_MASK |
CS42L42_PDN_MIC_LVL_DET_MASK,
- (0 << CS42L42_DETECT_MODE_SHIFT) |
(1 << CS42L42_HSBIAS_CTL_SHIFT) |
(1 << CS42L42_PDN_MIC_LVL_DET_SHIFT));
}
@@ -1351,10 +1347,8 @@ static void cs42l42_init_hs_type_detect(struct cs42l42_private *cs42l42)
/* Make sure button detect and HS bias circuits are off */
regmap_update_bits(cs42l42->regmap,
CS42L42_MISC_DET_CTL,
- CS42L42_DETECT_MODE_MASK |
CS42L42_HSBIAS_CTL_MASK |
CS42L42_PDN_MIC_LVL_DET_MASK,
- (0 << CS42L42_DETECT_MODE_SHIFT) |
(1 << CS42L42_HSBIAS_CTL_SHIFT) |
(1 << CS42L42_PDN_MIC_LVL_DET_SHIFT));
@@ -1398,10 +1392,8 @@ static void cs42l42_init_hs_type_detect(struct cs42l42_private *cs42l42)
/* Power up HS bias to 2.7V */
regmap_update_bits(cs42l42->regmap,
CS42L42_MISC_DET_CTL,
- CS42L42_DETECT_MODE_MASK |
CS42L42_HSBIAS_CTL_MASK |
CS42L42_PDN_MIC_LVL_DET_MASK,
- (0 << CS42L42_DETECT_MODE_SHIFT) |
(3 << CS42L42_HSBIAS_CTL_SHIFT) |
(1 << CS42L42_PDN_MIC_LVL_DET_SHIFT));
@@ -1448,10 +1440,8 @@ static void cs42l42_cancel_hs_type_detect(struct cs42l42_private *cs42l42)
/* Ground HS bias */
regmap_update_bits(cs42l42->regmap,
CS42L42_MISC_DET_CTL,
- CS42L42_DETECT_MODE_MASK |
CS42L42_HSBIAS_CTL_MASK |
CS42L42_PDN_MIC_LVL_DET_MASK,
- (0 << CS42L42_DETECT_MODE_SHIFT) |
(1 << CS42L42_HSBIAS_CTL_SHIFT) |
(1 << CS42L42_PDN_MIC_LVL_DET_SHIFT));
@@ -1829,6 +1819,9 @@ static void cs42l42_setup_hs_type_detect(struct cs42l42_private *cs42l42)
cs42l42->hs_type = CS42L42_PLUG_INVALID;
+ regmap_update_bits(cs42l42->regmap, CS42L42_MISC_DET_CTL,
+ CS42L42_DETECT_MODE_MASK, 0);
+
/* Latch analog controls to VP power domain */
regmap_update_bits(cs42l42->regmap, CS42L42_MIC_DET_CTL1,
CS42L42_LATCH_TO_VP_MASK |
--
2.11.0
next prev parent reply other threads:[~2021-11-16 16:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 16:26 [PATCH 0/4] ASoC: cs42l42: Remove redundant code Richard Fitzgerald
2021-11-16 16:26 ` [PATCH v2] ASoC: cs42l42: Add control for audio slow-start switch Richard Fitzgerald
2021-11-16 16:26 ` Richard Fitzgerald [this message]
2021-11-16 16:26 ` [PATCH 1/3] ASoC: dt-bindings: cs42l42: Correct description of ts-inv Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 2/3] ASoC: cs42l42: Correct configuring of switch inversion from ts-inv Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 2/4] ASoC: cs42l42: Remove redundant writes to RS_PLUG/RS_UNPLUG masks Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 3/4] ASoC: cs42l42: Simplify reporting of jack unplug Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 3/3] ASoC: dt-bindings: cs42l42: Convert binding to yaml Richard Fitzgerald
2021-11-16 16:26 ` [PATCH 4/4] ASoC: cs42l42: Remove redundant pll_divout member Richard Fitzgerald
2021-11-16 16:29 ` [PATCH 0/4] ASoC: cs42l42: Remove redundant code Richard Fitzgerald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211116162652.45225-3-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox