[PATCH RESEND v3 1/7] rtc-cmos: take rtc_lock while reading from CMOS

["Mateusz Jończyk" <mat.jonczyk@o2.pl>]

Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.

Use spin_lock_irq() like the rest of the function.

Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
---
 drivers/rtc/rtc-cmos.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 4eb53412b808..dc3f8b0dde98 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -457,7 +457,10 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	min = t->time.tm_min;
 	sec = t->time.tm_sec;
 
+	spin_lock_irq(&rtc_lock);
 	rtc_control = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
 	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
 		/* Writing 0xff means "don't care" or "match all".  */
 		mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
-- 
2.25.1