From: Maxim Levitsky <mlevitsk@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Joerg Roedel <joro@8bytes.org>,
Thomas Gleixner <tglx@linutronix.de>,
iommu@lists.linux-foundation.org (open list:AMD IOMMU (AMD-VI)),
Will Deacon <will@kernel.org>,
Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH 3/5] iommu/amd: x2apic mode: setup the INTX registers on mask/unmask
Date: Tue, 23 Nov 2021 18:10:36 +0200 [thread overview]
Message-ID: <20211123161038.48009-4-mlevitsk@redhat.com> (raw)
In-Reply-To: <20211123161038.48009-1-mlevitsk@redhat.com>
This is more logically correct and will also allow us to
to use mask/unmask logic to restore INTX setttings after
the resume from s3/s4.
Fixes: 66929812955bb ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
drivers/iommu/amd/init.c | 65 ++++++++++++++++++++--------------------
1 file changed, 33 insertions(+), 32 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index b905604f434e1..9e895bb8086a6 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -2015,48 +2015,18 @@ union intcapxt {
};
} __attribute__ ((packed));
-/*
- * There isn't really any need to mask/unmask at the irqchip level because
- * the 64-bit INTCAPXT registers can be updated atomically without tearing
- * when the affinity is being updated.
- */
-static void intcapxt_unmask_irq(struct irq_data *data)
-{
-}
-
-static void intcapxt_mask_irq(struct irq_data *data)
-{
-}
static struct irq_chip intcapxt_controller;
static int intcapxt_irqdomain_activate(struct irq_domain *domain,
struct irq_data *irqd, bool reserve)
{
- struct amd_iommu *iommu = irqd->chip_data;
- struct irq_cfg *cfg = irqd_cfg(irqd);
- union intcapxt xt;
-
- xt.capxt = 0ULL;
- xt.dest_mode_logical = apic->dest_mode_logical;
- xt.vector = cfg->vector;
- xt.destid_0_23 = cfg->dest_apicid & GENMASK(23, 0);
- xt.destid_24_31 = cfg->dest_apicid >> 24;
-
- /**
- * Current IOMMU implemtation uses the same IRQ for all
- * 3 IOMMU interrupts.
- */
- writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
- writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
- writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
return 0;
}
static void intcapxt_irqdomain_deactivate(struct irq_domain *domain,
struct irq_data *irqd)
{
- intcapxt_mask_irq(irqd);
}
@@ -2090,6 +2060,38 @@ static void intcapxt_irqdomain_free(struct irq_domain *domain, unsigned int virq
irq_domain_free_irqs_top(domain, virq, nr_irqs);
}
+
+static void intcapxt_unmask_irq(struct irq_data *irqd)
+{
+ struct amd_iommu *iommu = irqd->chip_data;
+ struct irq_cfg *cfg = irqd_cfg(irqd);
+ union intcapxt xt;
+
+ xt.capxt = 0ULL;
+ xt.dest_mode_logical = apic->dest_mode_logical;
+ xt.vector = cfg->vector;
+ xt.destid_0_23 = cfg->dest_apicid & GENMASK(23, 0);
+ xt.destid_24_31 = cfg->dest_apicid >> 24;
+
+ /**
+ * Current IOMMU implementation uses the same IRQ for all
+ * 3 IOMMU interrupts.
+ */
+ writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
+ writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
+ writeq(xt.capxt, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
+}
+
+static void intcapxt_mask_irq(struct irq_data *irqd)
+{
+ struct amd_iommu *iommu = irqd->chip_data;
+
+ writeq(0, iommu->mmio_base + MMIO_INTCAPXT_EVT_OFFSET);
+ writeq(0, iommu->mmio_base + MMIO_INTCAPXT_PPR_OFFSET);
+ writeq(0, iommu->mmio_base + MMIO_INTCAPXT_GALOG_OFFSET);
+}
+
+
static int intcapxt_set_affinity(struct irq_data *irqd,
const struct cpumask *mask, bool force)
{
@@ -2099,8 +2101,7 @@ static int intcapxt_set_affinity(struct irq_data *irqd,
ret = parent->chip->irq_set_affinity(parent, mask, force);
if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
return ret;
-
- return intcapxt_irqdomain_activate(irqd->domain, irqd, false);
+ return 0;
}
static struct irq_chip intcapxt_controller = {
--
2.26.3
next prev parent reply other threads:[~2021-11-23 16:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-23 16:10 [PATCH 0/5] iommu/amd: fixes for suspend/resume Maxim Levitsky
2021-11-23 16:10 ` [PATCH 1/5] iommu/amd: restore GA log/tail pointer on host resume Maxim Levitsky
2021-11-23 16:10 ` [PATCH 2/5] iommu/amd: x2apic mode: re-enable after resume Maxim Levitsky
2021-11-23 16:10 ` Maxim Levitsky [this message]
2021-11-23 16:10 ` [PATCH 4/5] iommu/amd: x2apic mode: mask/unmask interrupts on suspend/resume Maxim Levitsky
2021-11-23 16:10 ` [PATCH 5/5] iommu/amd: remove useless irq affinity notifier Maxim Levitsky
2021-12-01 23:08 ` [PATCH 0/5] iommu/amd: fixes for suspend/resume Maxim Levitsky
2021-12-10 8:00 ` Maxim Levitsky
2021-12-06 14:01 ` Joerg Roedel
2021-12-17 8:31 ` Joerg Roedel
2022-01-25 15:08 ` Mike Lothian
2022-01-25 19:26 ` Maxim Levitsky
2022-01-25 23:25 ` Mike Lothian
2022-01-26 7:34 ` Maxim Levitsky
2022-01-26 9:54 ` Mike Lothian
2022-01-26 10:12 ` Maxim Levitsky
2022-01-27 0:39 ` Mike Lothian
2022-01-27 10:22 ` Maxim Levitsky
2022-01-27 10:50 ` Mike Lothian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211123161038.48009-4-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=dwmw@amazon.co.uk \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=suravee.suthikulpanit@amd.com \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox