[PATCH net-next 7/9] igc: switch to napi_build_skb()

[Alexander Lobakin <alexandr.lobakin@intel.com>]

napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order
to save some cycles on freeing/allocating skbuff_heads on every
new Rx or completed Tx.
igc driver runs Tx completion polling cycle right before the Rx
one and uses napi_consume_skb() to feed the cache with skbuff_heads
of completed entries, so it's never empty and always warm at that
moment. Switch to the napi_build_skb() to relax mm pressure on
heavy Rx.

Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 8e448288ee26..8b13a61ea5c9 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -1729,7 +1729,7 @@ static struct sk_buff *igc_build_skb(struct igc_ring *rx_ring,
 	net_prefetch(va);

 	/* build an skb around the page buffer */
-	skb = build_skb(va - IGC_SKB_PAD, truesize);
+	skb = napi_build_skb(va - IGC_SKB_PAD, truesize);
 	if (unlikely(!skb))
 		return NULL;

--
2.33.1