From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 10/15] arm64: dts: qcom: sm8450: add interconnect nodes
Date: Wed, 1 Dec 2021 12:59:10 +0530 [thread overview]
Message-ID: <20211201072915.3969178-11-vkoul@kernel.org> (raw)
In-Reply-To: <20211201072915.3969178-1-vkoul@kernel.org>
And the various interconnect nodes found in SM8450 SoC and use it for
UFS controller.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 80 ++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 75827bbfb3ad..4c7cdcea33fa 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sm8450.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -573,6 +574,61 @@ uart7: serial@99c000 {
};
};
+ config_noc: interconnect@1500000 {
+ compatible = "qcom,sm8450-config-noc";
+ reg = <0 0x01500000 0 0x1c000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@1580000 {
+ compatible = "qcom,sm8450-mc-virt";
+ reg = <0 0x01580000 0 0x1000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ reg = <0 0x01680000 0 0x1e200>;
+ compatible = "qcom,sm8450-system-noc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ pcie_noc: interconnect@16c0000 {
+ reg = <0 0x016c0000 0 0xe280>;
+ compatible = "qcom,sm8450-pcie-anoc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ reg = <0 0x016e0000 0 0x1c080>;
+ compatible = "qcom,sm8450-aggre1-noc";
+ #interconnect-cells = <1>;
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ reg = <0 0x01700000 0 0x31080>;
+ compatible = "qcom,sm8450-aggre2-noc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&rpmhcc RPMH_IPA_CLK>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ reg = <0 0x01740000 0 0x1f080>;
+ compatible = "qcom,sm8450-mmss-noc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -817,6 +873,13 @@ rpmhcc: clock-controller {
};
};
+ gem_noc: interconnect@19100000 {
+ reg = <0 0x19100000 0 0xbb800>;
+ compatible = "qcom,sm8450-gem-noc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -833,6 +896,9 @@ ufs_mem_hc: ufshc@1d84000 {
iommus = <&apps_smmu 0xe0 0x0>;
+ interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
clock-names =
"core_clk",
"bus_aggr_clk",
@@ -888,6 +954,20 @@ ufs_mem_phy_lanes: lanes@1d87400 {
#clock-cells = <0>;
};
};
+
+ nsp_noc: interconnect@320c0000 {
+ reg = <0 0x320c0000 0 0x10000>;
+ compatible = "qcom,sm8450-nsp-noc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_ag_noc: interconnect@3c40000 {
+ reg = <0 0x3c40000 0 0x17200>;
+ compatible = "qcom,sm8450-lpass-ag-noc";
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
};
timer {
--
2.31.1
next prev parent reply other threads:[~2021-12-01 7:30 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-01 7:29 [PATCH 00/15] arm64: dts: qcom: Add support for SM8450 SoC and QRD board Vinod Koul
2021-12-01 7:29 ` [PATCH 01/15] arm64: dts: qcom: Add base SM8450 DTSI Vinod Koul
2021-12-01 15:03 ` Konrad Dybcio
2021-12-06 5:39 ` Vinod Koul
2021-12-07 14:35 ` Bjorn Andersson
2021-12-07 14:53 ` Bjorn Andersson
2021-12-01 7:29 ` [PATCH 02/15] arm64: dts: qcom: Add base SM8450 QRD DTS Vinod Koul
2021-12-01 15:05 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 03/15] arm64: dts: qcom: sm8450: Add tlmm nodes Vinod Koul
2021-12-07 14:37 ` Bjorn Andersson
2021-12-01 7:29 ` [PATCH 04/15] arm64: dts: qcom: sm8450-qrd: Add reserved gpio range for QRD Vinod Koul
2021-12-01 15:07 ` Konrad Dybcio
2021-12-06 5:53 ` Vinod Koul
2021-12-07 14:56 ` Bjorn Andersson
2021-12-01 7:29 ` [PATCH 05/15] arm64: dts: qcom: sm8450: Add reserved memory nodes Vinod Koul
2021-12-01 15:11 ` Konrad Dybcio
2021-12-06 5:42 ` Vinod Koul
2021-12-01 7:29 ` [PATCH 06/15] arm64: dts: qcom: sm8450: add smmu nodes Vinod Koul
2021-12-01 15:13 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 07/15] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes Vinod Koul
2021-12-01 15:14 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 09/15] arm64: dts: qcom: sm8450-qrd: enable ufs nodes Vinod Koul
2021-12-01 15:18 ` Konrad Dybcio
2021-12-06 5:58 ` Vinod Koul
2021-12-07 15:01 ` Bjorn Andersson
2021-12-01 7:29 ` Vinod Koul [this message]
2021-12-01 15:20 ` [PATCH 10/15] arm64: dts: qcom: sm8450: add interconnect nodes Konrad Dybcio
2021-12-06 6:12 ` Vinod Koul
2021-12-01 7:29 ` [PATCH 11/15] arm64: dts: qcom: sm8450: add spmi node Vinod Koul
2021-12-01 15:22 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 12/15] arm64: dts: qcom: sm8450-qrd: include pmic files Vinod Koul
2021-12-01 15:23 ` Konrad Dybcio
2021-12-07 15:05 ` Bjorn Andersson
2021-12-07 15:51 ` Vinod Koul
2021-12-01 7:29 ` [PATCH 13/15] arm64: dts: qcom: sm8450: Add rpmhpd node Vinod Koul
2021-12-01 15:24 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211201072915.3969178-11-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox