From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 05/15] arm64: dts: qcom: sm8450: Add reserved memory nodes
Date: Wed, 1 Dec 2021 12:59:05 +0530 [thread overview]
Message-ID: <20211201072915.3969178-6-vkoul@kernel.org> (raw)
In-Reply-To: <20211201072915.3969178-1-vkoul@kernel.org>
Add the reserved memory nodes for SM8450. This is based on the downstream
documentation.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 221 +++++++++++++++++++++++++++
1 file changed, 221 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index f0b9e80238a2..79aead4cba66 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -310,6 +310,227 @@ CLUSTER_PD: cpu-cluster0 {
};
};
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@80000000 {
+ no-map;
+ reg = <0x0 0x80000000 0x0 0x600000>;
+ };
+
+ xbl_dt_log_mem: memory@80600000 {
+ no-map;
+ reg = <0x0 0x80600000 0x0 0x40000>;
+ };
+
+ xbl_ramdump_mem: memory@80640000 {
+ no-map;
+ reg = <0x0 0x80640000 0x0 0x180000>;
+ };
+
+ xbl_sc_mem: memory@807c0000 {
+ no-map;
+ reg = <0x0 0x807c0000 0x0 0x40000>;
+ };
+
+ aop_image_mem: memory@80800000 {
+ no-map;
+ reg = <0x0 0x80800000 0x0 0x60000>;
+ };
+
+ aop_cmd_db_mem: memory@80860000 {
+ compatible = "qcom,cmd-db";
+ no-map;
+ reg = <0x0 0x80860000 0x0 0x20000>;
+ };
+
+ aop_config_mem: memory@80880000 {
+ no-map;
+ reg = <0x0 0x80880000 0x0 0x20000>;
+ };
+
+ tme_crash_dump_mem: memory@808a0000 {
+ no-map;
+ reg = <0x0 0x808a0000 0x0 0x40000>;
+ };
+
+ tme_log_mem: memory@808e0000 {
+ no-map;
+ reg = <0x0 0x808e0000 0x0 0x4000>;
+ };
+
+ uefi_log_mem: memory@808e4000 {
+ no-map;
+ reg = <0x0 0x808e4000 0x0 0x10000>;
+ };
+
+ /* secdata region can be reused by apps */
+ smem: memory@80900000 {
+ compatible = "qcom,smem";
+ no-map;
+ reg = <0x0 0x80900000 0x0 0x200000>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ cpucp_fw_mem: memory@80b00000 {
+ no-map;
+ reg = <0x0 0x80b00000 0x0 0x100000>;
+ };
+
+ cdsp_secure_heap: memory@80c00000 {
+ no-map;
+ reg = <0x0 0x80c00000 0x0 0x4600000>;
+ };
+
+ camera_mem: memory@85200000 {
+ no-map;
+ reg = <0x0 0x85200000 0x0 0x500000>;
+ };
+
+ video_mem: memory@85700000 {
+ no-map;
+ reg = <0x0 0x85700000 0x0 0x700000>;
+ };
+
+ adsp_mem: memory@85e00000 {
+ no-map;
+ reg = <0x0 0x85e00000 0x0 0x2100000>;
+ };
+
+ slpi_mem: memory@88000000 {
+ no-map;
+ reg = <0x0 0x88000000 0x0 0x1900000>;
+ };
+
+ cdsp_mem: memory@89900000 {
+ no-map;
+ reg = <0x0 0x89900000 0x0 0x2000000>;
+ };
+
+ ipa_fw_mem: memory@8b900000 {
+ no-map;
+ reg = <0x0 0x8b900000 0x0 0x10000>;
+ };
+
+ ipa_gsi_mem: memory@8b910000 {
+ no-map;
+ reg = <0x0 0x8b910000 0x0 0xa000>;
+ };
+
+ gpu_micro_code_mem: memory@8b91a000 {
+ no-map;
+ reg = <0x0 0x8b91a000 0x0 0x2000>;
+ };
+
+ spss_region_mem: memory@8ba00000 {
+ no-map;
+ reg = <0x0 0x8ba00000 0x0 0x180000>;
+ };
+
+ /* First part of the "SPU secure shared memory" region */
+ spu_tz_shared_mem: memory@8bb80000 {
+ no-map;
+ reg = <0x0 0x8bb80000 0x0 0x60000>;
+ };
+
+ /* Second part of the "SPU secure shared memory" region */
+ spu_modem_shared_mem: memory@8bbe0000 {
+ no-map;
+ reg = <0x0 0x8bbe0000 0x0 0x20000>;
+ };
+
+ mpss_mem: memory@8bc00000 {
+ no-map;
+ reg = <0x0 0x8bc00000 0x0 0x13200000>;
+ };
+
+ cvp_mem: memory@9ee00000 {
+ no-map;
+ reg = <0x0 0x9ee00000 0x0 0x700000>;
+ };
+
+ global_sync_mem: memory@a6f00000 {
+ no-map;
+ reg = <0x0 0xa6f00000 0x0 0x100000>;
+ };
+
+ /* uefi region can be reused by apps */
+
+ /* Linux kernel image is loaded at 0xa0000000 */
+
+ oem_vm_mem: memory@bb000000 {
+ no-map;
+ reg = <0x0 0xbb000000 0x0 0x5000000>;
+ };
+
+ mte_mem: memory@c0000000 {
+ no-map;
+ reg = <0x0 0xc0000000 0x0 0x20000000>;
+ };
+
+ qheebsp_reserved_mem: memory@e0000000 {
+ no-map;
+ reg = <0x0 0xe0000000 0x0 0x600000>;
+ };
+
+ cpusys_vm_mem: memory@e0600000 {
+ no-map;
+ reg = <0x0 0xe0600000 0x0 0x400000>;
+ };
+
+ hyp_reserved_mem: memory@e0a00000 {
+ no-map;
+ reg = <0x0 0xe0a00000 0x0 0x100000>;
+ };
+
+ trust_ui_vm_mem: memory@e0b00000 {
+ no-map;
+ reg = <0x0 0xe0b00000 0x0 0x4af3000>;
+ };
+
+ trust_ui_vm_qrtr: memory@e55f3000 {
+ no-map;
+ reg = <0x0 0xe55f3000 0x0 0x9000>;
+ };
+
+ trust_ui_vm_vblk0_ring: memory@e55fc000 {
+ no-map;
+ reg = <0x0 0xe55fc000 0x0 0x4000>;
+ };
+
+ trust_ui_vm_swiotlb: memory@e5600000 {
+ no-map;
+ reg = <0x0 0xe5600000 0x0 0x100000>;
+ };
+
+ tz_stat_mem: memory@e8800000 {
+ no-map;
+ reg = <0x0 0xe8800000 0x0 0x100000>;
+ };
+
+ tags_mem: memory@e8900000 {
+ no-map;
+ reg = <0x0 0xe8900000 0x0 0x1200000>;
+ };
+
+ qtee_mem: memory@e9b00000 {
+ no-map;
+ reg = <0x0 0xe9b00000 0x0 0x500000>;
+ };
+
+ trusted_apps_mem: memory@ea000000 {
+ no-map;
+ reg = <0x0 0xea000000 0x0 0x3900000>;
+ };
+
+ trusted_apps_ext_mem: memory@ed900000 {
+ no-map;
+ reg = <0x0 0xed900000 0x0 0x3b00000>;
+ };
+ };
+
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
--
2.31.1
next prev parent reply other threads:[~2021-12-01 7:29 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-01 7:29 [PATCH 00/15] arm64: dts: qcom: Add support for SM8450 SoC and QRD board Vinod Koul
2021-12-01 7:29 ` [PATCH 01/15] arm64: dts: qcom: Add base SM8450 DTSI Vinod Koul
2021-12-01 15:03 ` Konrad Dybcio
2021-12-06 5:39 ` Vinod Koul
2021-12-07 14:35 ` Bjorn Andersson
2021-12-07 14:53 ` Bjorn Andersson
2021-12-01 7:29 ` [PATCH 02/15] arm64: dts: qcom: Add base SM8450 QRD DTS Vinod Koul
2021-12-01 15:05 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 03/15] arm64: dts: qcom: sm8450: Add tlmm nodes Vinod Koul
2021-12-07 14:37 ` Bjorn Andersson
2021-12-01 7:29 ` [PATCH 04/15] arm64: dts: qcom: sm8450-qrd: Add reserved gpio range for QRD Vinod Koul
2021-12-01 15:07 ` Konrad Dybcio
2021-12-06 5:53 ` Vinod Koul
2021-12-07 14:56 ` Bjorn Andersson
2021-12-01 7:29 ` Vinod Koul [this message]
2021-12-01 15:11 ` [PATCH 05/15] arm64: dts: qcom: sm8450: Add reserved memory nodes Konrad Dybcio
2021-12-06 5:42 ` Vinod Koul
2021-12-01 7:29 ` [PATCH 06/15] arm64: dts: qcom: sm8450: add smmu nodes Vinod Koul
2021-12-01 15:13 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 07/15] arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes Vinod Koul
2021-12-01 15:14 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 09/15] arm64: dts: qcom: sm8450-qrd: enable ufs nodes Vinod Koul
2021-12-01 15:18 ` Konrad Dybcio
2021-12-06 5:58 ` Vinod Koul
2021-12-07 15:01 ` Bjorn Andersson
2021-12-01 7:29 ` [PATCH 10/15] arm64: dts: qcom: sm8450: add interconnect nodes Vinod Koul
2021-12-01 15:20 ` Konrad Dybcio
2021-12-06 6:12 ` Vinod Koul
2021-12-01 7:29 ` [PATCH 11/15] arm64: dts: qcom: sm8450: add spmi node Vinod Koul
2021-12-01 15:22 ` Konrad Dybcio
2021-12-01 7:29 ` [PATCH 12/15] arm64: dts: qcom: sm8450-qrd: include pmic files Vinod Koul
2021-12-01 15:23 ` Konrad Dybcio
2021-12-07 15:05 ` Bjorn Andersson
2021-12-07 15:51 ` Vinod Koul
2021-12-01 7:29 ` [PATCH 13/15] arm64: dts: qcom: sm8450: Add rpmhpd node Vinod Koul
2021-12-01 15:24 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211201072915.3969178-6-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox