[PATCH 4/5] arm64: dts: ns2: Add missing interrupt-controller property

Florian Fainelli
2021-12-02T23:33:10Z

Add the missing interrupt-controller property to the Northstar 2 iProc
PCIe controller node(s) in preparation for validating the PCIe
controller DT.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 2cfeaf3b0a87..0e10d2dd38cf 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -116,6 +116,7 @@ pcie0: pcie@20020000 {
reg = <0 0x20020000 0 0x1000>;
dma-coherent;

+ interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
@@ -147,6 +148,7 @@ pcie4: pcie@50020000 {
reg = <0 0x50020000 0 0x1000>;
dma-coherent;

+ interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1