From: Stephen Boyd <sboyd@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Lo <james.lo@mediatek.com>,
linux-kernel@vger.kernel.org,
Henry Chen <henryc.chen@mediatek.com>,
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Subject: [PATCH 5/6] spmi: mediatek: Add support for MT8195
Date: Thu, 16 Dec 2021 11:08:11 -0800 [thread overview]
Message-ID: <20211216190812.1574801-6-sboyd@kernel.org> (raw)
In-Reply-To: <20211216190812.1574801-1-sboyd@kernel.org>
From: James Lo <james.lo@mediatek.com>
Add spmi support for MT8195.
Refine indent in spmi-mtk-pmif.c.
Signed-off-by: James Lo <james.lo@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211119034613.32489-5-james.lo@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/spmi/spmi-mtk-pmif.c | 88 ++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
index f6644104088d..ad511f2c3324 100644
--- a/drivers/spmi/spmi-mtk-pmif.c
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -152,6 +152,54 @@ static const u32 mt6873_regs[] = {
[PMIF_SWINF_3_STA] = 0x0CE8,
};
+static const u32 mt8195_regs[] = {
+ [PMIF_INIT_DONE] = 0x0000,
+ [PMIF_INF_EN] = 0x0024,
+ [PMIF_ARB_EN] = 0x0150,
+ [PMIF_CMDISSUE_EN] = 0x03B8,
+ [PMIF_TIMER_CTRL] = 0x03E4,
+ [PMIF_SPI_MODE_CTRL] = 0x0408,
+ [PMIF_IRQ_EVENT_EN_0] = 0x0420,
+ [PMIF_IRQ_FLAG_0] = 0x0428,
+ [PMIF_IRQ_CLR_0] = 0x042C,
+ [PMIF_IRQ_EVENT_EN_1] = 0x0430,
+ [PMIF_IRQ_FLAG_1] = 0x0438,
+ [PMIF_IRQ_CLR_1] = 0x043C,
+ [PMIF_IRQ_EVENT_EN_2] = 0x0440,
+ [PMIF_IRQ_FLAG_2] = 0x0448,
+ [PMIF_IRQ_CLR_2] = 0x044C,
+ [PMIF_IRQ_EVENT_EN_3] = 0x0450,
+ [PMIF_IRQ_FLAG_3] = 0x0458,
+ [PMIF_IRQ_CLR_3] = 0x045C,
+ [PMIF_IRQ_EVENT_EN_4] = 0x0460,
+ [PMIF_IRQ_FLAG_4] = 0x0468,
+ [PMIF_IRQ_CLR_4] = 0x046C,
+ [PMIF_WDT_EVENT_EN_0] = 0x0474,
+ [PMIF_WDT_FLAG_0] = 0x0478,
+ [PMIF_WDT_EVENT_EN_1] = 0x047C,
+ [PMIF_WDT_FLAG_1] = 0x0480,
+ [PMIF_SWINF_0_ACC] = 0x0800,
+ [PMIF_SWINF_0_WDATA_31_0] = 0x0804,
+ [PMIF_SWINF_0_RDATA_31_0] = 0x0814,
+ [PMIF_SWINF_0_VLD_CLR] = 0x0824,
+ [PMIF_SWINF_0_STA] = 0x0828,
+ [PMIF_SWINF_1_ACC] = 0x0840,
+ [PMIF_SWINF_1_WDATA_31_0] = 0x0844,
+ [PMIF_SWINF_1_RDATA_31_0] = 0x0854,
+ [PMIF_SWINF_1_VLD_CLR] = 0x0864,
+ [PMIF_SWINF_1_STA] = 0x0868,
+ [PMIF_SWINF_2_ACC] = 0x0880,
+ [PMIF_SWINF_2_WDATA_31_0] = 0x0884,
+ [PMIF_SWINF_2_RDATA_31_0] = 0x0894,
+ [PMIF_SWINF_2_VLD_CLR] = 0x08A4,
+ [PMIF_SWINF_2_STA] = 0x08A8,
+ [PMIF_SWINF_3_ACC] = 0x08C0,
+ [PMIF_SWINF_3_WDATA_31_0] = 0x08C4,
+ [PMIF_SWINF_3_RDATA_31_0] = 0x08D4,
+ [PMIF_SWINF_3_VLD_CLR] = 0x08E4,
+ [PMIF_SWINF_3_STA] = 0x08E8,
+};
+
enum spmi_regs {
SPMI_OP_ST_CTRL,
SPMI_GRP_ID_EN,
@@ -165,6 +213,15 @@ enum spmi_regs {
SPMI_REC3,
SPMI_REC4,
SPMI_MST_DBG,
+
+ /* MT8195 spmi regs */
+ SPMI_MST_RCS_CTRL,
+ SPMI_SLV_3_0_EINT,
+ SPMI_SLV_7_4_EINT,
+ SPMI_SLV_B_8_EINT,
+ SPMI_SLV_F_C_EINT,
+ SPMI_REC_CMD_DEC,
+ SPMI_DEC_DBG,
};
static const u32 mt6873_spmi_regs[] = {
@@ -182,6 +239,28 @@ static const u32 mt6873_spmi_regs[] = {
[SPMI_MST_DBG] = 0x00fc,
};
+static const u32 mt8195_spmi_regs[] = {
+ [SPMI_OP_ST_CTRL] = 0x0000,
+ [SPMI_GRP_ID_EN] = 0x0004,
+ [SPMI_OP_ST_STA] = 0x0008,
+ [SPMI_MST_SAMPL] = 0x000C,
+ [SPMI_MST_REQ_EN] = 0x0010,
+ [SPMI_MST_RCS_CTRL] = 0x0014,
+ [SPMI_SLV_3_0_EINT] = 0x0020,
+ [SPMI_SLV_7_4_EINT] = 0x0024,
+ [SPMI_SLV_B_8_EINT] = 0x0028,
+ [SPMI_SLV_F_C_EINT] = 0x002C,
+ [SPMI_REC_CTRL] = 0x0040,
+ [SPMI_REC0] = 0x0044,
+ [SPMI_REC1] = 0x0048,
+ [SPMI_REC2] = 0x004C,
+ [SPMI_REC3] = 0x0050,
+ [SPMI_REC4] = 0x0054,
+ [SPMI_REC_CMD_DEC] = 0x005C,
+ [SPMI_DEC_DBG] = 0x00F8,
+ [SPMI_MST_DBG] = 0x00FC,
+};
+
static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
{
return readl(arb->base + arb->data->regs[reg]);
@@ -345,6 +424,12 @@ static const struct pmif_data mt6873_pmif_arb = {
.soc_chan = 2,
};
+static const struct pmif_data mt8195_pmif_arb = {
+ .regs = mt8195_regs,
+ .spmimst_regs = mt8195_spmi_regs,
+ .soc_chan = 2,
+};
+
static int mtk_spmi_probe(struct platform_device *pdev)
{
struct pmif *arb;
@@ -433,6 +518,9 @@ static const struct of_device_id mtk_spmi_match_table[] = {
{
.compatible = "mediatek,mt6873-spmi",
.data = &mt6873_pmif_arb,
+ }, {
+ .compatible = "mediatek,mt8195-spmi",
+ .data = &mt8195_pmif_arb,
}, {
/* sentinel */
},
--
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git
next prev parent reply other threads:[~2021-12-16 19:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-16 19:08 [PATCH 0/6] spmi patches for the next merge window Stephen Boyd
2021-12-16 19:08 ` [PATCH 1/6] spmi: pmic-arb: Add sid and address to error messages Stephen Boyd
2021-12-16 19:08 ` [PATCH 2/6] dt-bindings: spmi: remove the constraint of reg property Stephen Boyd
2021-12-16 19:08 ` [PATCH 3/6] dt-bindings: spmi: document binding for the Mediatek SPMI controller Stephen Boyd
2021-12-16 19:08 ` [PATCH 4/6] spmi: mediatek: Add support for MT6873/8192 Stephen Boyd
2021-12-16 19:08 ` Stephen Boyd [this message]
2021-12-16 19:08 ` [PATCH 6/6] spmi: spmi-pmic-arb: fix irq_set_type race condition Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211216190812.1574801-6-sboyd@kernel.org \
--to=sboyd@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=gregkh@linuxfoundation.org \
--cc=henryc.chen@mediatek.com \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=james.lo@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox