From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>,
Jaroslav Kysela <perex@perex.cz>,
Liam Girdwood <lgirdwood@gmail.com>, Agneli <poczt@protonmail.ch>
Cc: linux-tegra@vger.kernel.org, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v5 00/11] Support HDMI audio on NVIDIA Tegra20
Date: Fri, 17 Dec 2021 20:55:55 +0300 [thread overview]
Message-ID: <20211217175606.22645-1-digetx@gmail.com> (raw)
This series revives Tegra20 S/PDIF driver which was upstreamed long time
ago, but never was used. It also turns Tegra DRM HDMI driver into HDMI
audio CODEC provider. Finally, HDMI audio is enabled in device-trees.
For now the audio is enable only for Acer A500 tablet and Toshiba AC100
netbook because they're already supported by upstream, later on ASUS TF101
tablet will join them.
(!) These patches are made on top of stable dmaengine branch from Vinod Koul.
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git tags/dmaengine_topic_slave_id_removal_5.17
for you to fetch changes up to 3c219644075795a99271d345efdfa8b256e55161:
dmaengine: remove slave_id config field (2021-12-17 11:23:56 +0530)
Changelog:
v5: - Dropped all patches that were already applied by Thierry Reding.
- Made minor changes that were suggested by Thierry Reding.
- Added acks from Thierry Reding.
- Rebased patches on top of stable dmaengine branch from Vinod Koul.
v4: - Added patches that update multi_v7_defconfig with the enabled S/PDIF
and APB DMA drivers.
v3: - Renamed S/PDIF device-tree clocks as was suggested by Rob Herring.
- Added r-bs and acks that were given by Rob Herring to v2.
v2: - Corrected I2S yaml problem that was reported by the DT bot for v1
by removing the non-existent required clock-names property.
- Removed assigned-clocks property from S/PDIF yaml since this property
is now inherited from the clocks property.
- Reordered the "tegra20: spdif: Set FIFO trigger level" patch, making
it the first sound/soc patch in the series, like it was suggested by
Mark Brown in the comment to v1. Also reworded commit message of this
patch to *not* make it looks like it should be backported to stable
kernels.
Dmitry Osipenko (11):
ASoC: dt-bindings: Add binding for Tegra20 S/PDIF
ASoC: dt-bindings: tegra20-i2s: Convert to schema
ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate
property
ASoC: tegra20: spdif: Set FIFO trigger level
ASoC: tegra20: spdif: Support device-tree
ASoC: tegra20: spdif: Improve driver's code
ASoC: tegra20: spdif: Use more resource-managed helpers
ASoC: tegra20: spdif: Reset hardware
ASoC: tegra20: spdif: Support system suspend
ASoC: tegra20: spdif: Filter out unsupported rates
ASoC: tegra20: i2s: Filter out unsupported rates
.../bindings/sound/nvidia,tegra20-i2s.txt | 30 ---
.../bindings/sound/nvidia,tegra20-i2s.yaml | 77 +++++++
.../bindings/sound/nvidia,tegra20-spdif.yaml | 85 ++++++++
sound/soc/tegra/tegra20_i2s.c | 49 +++++
sound/soc/tegra/tegra20_spdif.c | 198 +++++++++++++-----
sound/soc/tegra/tegra20_spdif.h | 1 +
sound/soc/tegra/tegra_pcm.c | 6 +
sound/soc/tegra/tegra_pcm.h | 1 +
8 files changed, 359 insertions(+), 88 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
--
2.33.1
next reply other threads:[~2021-12-17 17:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-17 17:55 Dmitry Osipenko [this message]
2021-12-17 17:55 ` [PATCH v5 01/11] ASoC: dt-bindings: Add binding for Tegra20 S/PDIF Dmitry Osipenko
2021-12-17 17:55 ` [PATCH v5 02/11] ASoC: dt-bindings: tegra20-i2s: Convert to schema Dmitry Osipenko
2021-12-17 17:55 ` [PATCH v5 03/11] ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate property Dmitry Osipenko
2021-12-17 17:55 ` [PATCH v5 04/11] ASoC: tegra20: spdif: Set FIFO trigger level Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 05/11] ASoC: tegra20: spdif: Support device-tree Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 06/11] ASoC: tegra20: spdif: Improve driver's code Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 07/11] ASoC: tegra20: spdif: Use more resource-managed helpers Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 08/11] ASoC: tegra20: spdif: Reset hardware Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 09/11] ASoC: tegra20: spdif: Support system suspend Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 10/11] ASoC: tegra20: spdif: Filter out unsupported rates Dmitry Osipenko
2021-12-17 17:56 ` [PATCH v5 11/11] ASoC: tegra20: i2s: " Dmitry Osipenko
2021-12-17 18:05 ` [PATCH v5 00/11] Support HDMI audio on NVIDIA Tegra20 Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211217175606.22645-1-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=perex@perex.cz \
--cc=poczt@protonmail.ch \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox