From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, syzkaller <syzkaller@googlegroups.com>,
Douglas Gilbert <dgilbert@interlog.com>,
George Kennedy <george.kennedy@oracle.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Subject: [PATCH 4.9 22/31] scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()
Date: Mon, 20 Dec 2021 15:34:22 +0100 [thread overview]
Message-ID: <20211220143020.687663091@linuxfoundation.org> (raw)
In-Reply-To: <20211220143019.974513085@linuxfoundation.org>
From: George Kennedy <george.kennedy@oracle.com>
commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream.
In resp_mode_select() sanity check the block descriptor len to avoid UAF.
BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032
CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
<TASK>
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113
Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/scsi_debug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2175,11 +2175,11 @@ static int resp_mode_select(struct scsi_
__func__, param_len, res);
md_len = mselect6 ? (arr[0] + 1) : (get_unaligned_be16(arr + 0) + 2);
bd_len = mselect6 ? arr[3] : get_unaligned_be16(arr + 6);
- if (md_len > 2) {
+ off = bd_len + (mselect6 ? 4 : 8);
+ if (md_len > 2 || off >= res) {
mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
return check_condition_result;
}
- off = bd_len + (mselect6 ? 4 : 8);
mpage = arr[off] & 0x3f;
ps = !!(arr[off] & 0x80);
if (ps) {
next prev parent reply other threads:[~2021-12-20 14:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-20 14:34 [PATCH 4.9 00/31] 4.9.294-rc1 review Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 01/31] nfc: fix segfault in nfc_genl_dump_devices_done Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 02/31] net/mlx4_en: Update reported link modes for 1/10G Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 03/31] parisc/agp: Annotate parisc agp init functions with __init Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 04/31] i2c: rk3x: Handle a spurious start completion interrupt flag Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 05/31] net: netlink: af_netlink: Prevent empty skb by adding a check on len Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 06/31] tracing: Fix a kmemleak false positive in tracing_map Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 07/31] hwmon: (dell-smm) Fix warning on /proc/i8k creation error Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 08/31] mac80211: send ADDBA requests using the tid/queue of the aggregation session Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 09/31] recordmcount.pl: look for jgnop instruction as well as bcrl on s390 Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 10/31] dm btree remove: fix use after free in rebalance_children() Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 11/31] nfsd: fix use-after-free due to delegation race Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 12/31] soc/tegra: fuse: Fix bitwise vs. logical OR warning Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 13/31] igbvf: fix double free in `igbvf_probe` Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 14/31] ixgbe: set X550 MDIO speed before talking to PHY Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 15/31] USB: gadget: bRequestType is a bitfield, not a enum Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 16/31] PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 17/31] USB: serial: option: add Telit FN990 compositions Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 18/31] timekeeping: Really make sure wall_to_monotonic isnt positive Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 19/31] net: systemport: Add global locking for descriptor lifecycle Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 20/31] firmware: arm_scpi: Fix string overflow in SCPI genpd driver Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 21/31] fuse: annotate lock in fuse_reverse_inval_entry() Greg Kroah-Hartman
2021-12-20 14:34 ` Greg Kroah-Hartman [this message]
2021-12-20 14:34 ` [PATCH 4.9 23/31] net: lan78xx: Avoid unnecessary self assignment Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 24/31] ARM: 8805/2: remove unneeded naked function usage Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 25/31] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 26/31] Input: touchscreen - avoid bitwise vs logical OR warning Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 27/31] xen/blkfront: harden blkfront against event channel storms Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 28/31] xen/netfront: harden netfront " Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 29/31] xen/console: harden hvc_xen " Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 30/31] xen/netback: fix rx queue stall detection Greg Kroah-Hartman
2021-12-20 14:34 ` [PATCH 4.9 31/31] xen/netback: dont queue unlimited number of packages Greg Kroah-Hartman
2021-12-20 17:22 ` [PATCH 4.9 00/31] 4.9.294-rc1 review Florian Fainelli
2021-12-20 23:19 ` Shuah Khan
2021-12-21 17:33 ` Naresh Kamboju
2021-12-21 23:12 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211220143020.687663091@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=dgilbert@interlog.com \
--cc=george.kennedy@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
--cc=syzkaller@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox