[PATCH] Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe

[Miaoqian Lin <linmq006@gmail.com>]

The function devm_gpiod_get_index() return error pointers on error.
Thus devm_gpiod_get_index_optional() could return NULL and error pointers.
The same as devm_gpiod_get_optional() function. Using IS_ERR_OR_NULL()
check to catch error pointers.

Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
---
 drivers/bluetooth/hci_qca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index dd768a8ed7cb..a6957447a7b3 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2056,14 +2056,14 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
 			power_ctrl_enabled = false;
 		}
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
-		if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
+		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
 			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
 
 		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2085,7 +2085,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en)) {
 			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
 			power_ctrl_enabled = false;
 		}
-- 
2.17.1