Re: [PATCH v3 0/5] PCI: mt7621: Remove specific MIPS code from driver

[Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>]

On Wed, Jan 12, 2022 at 03:42:56PM +0100, Sergio Paracuellos wrote:
> Hi Bjorn, Lorenzo,
> 
> On Tue, Dec 7, 2021 at 11:49 AM Sergio Paracuellos
> <sergio.paracuellos@gmail.com> wrote:
> >
> > Hi all,
> >
> > MIPS specific code can be removed from driver and put into ralink mt7621
> > instead which is a more accurate place to do this. To make this possible
> > we need to have access to 'bridge->windows' in 'pcibios_root_bridge_prepare()'
> > which has been implemented for ralink mt7621 platform (there is no real
> > need to implement this for any other platforms since those ones haven't got
> > I/O coherency units). This also allow us to properly enable this driver to
> > completely be enabled for COMPILE_TEST. This patchset appoarch:
> > - Move windows list splice in 'pci_register_host_bridge()' after function
> >   'pcibios_root_bridge_prepare()' is called.
> > - Implement 'pcibios_root_bridge_prepare()' for ralink mt7621.
> > - Avoid custom MIPs code in pcie-mt7621 driver.
> > - Add missing 'MODULE_LICENSE()' to pcie-mt7621 driver to avoid compile test
> >   module compilation to complain (already sent patch from Yanteng Si that
> >   I have rewrite commit message and long description a bit.
> > - Remove MIPS conditional code from Kconfig and mark driver as 'tristate'.
> >
> > This patchset is a real fix for some errors reported by Kernel Test Robot about
> > implicit mips functions used in driver code and fix errors in driver when
> > is compiled as a module [1] (mips:allmodconfig).
> >
> > Changes in v3:
> >  - Rebase the series on the top of the temporal fix sent for v5.16[3] for
> >    the module compilation problem.
> >  - Address review comments from Guenter in PATCH 2 (thanks Guenter!):
> >     - Address TODO in comment about the hardware does not allow zeros
> >       after 1s for the mask and WARN_ON if that's happend.
> >     - Be sure mask is real valid upper 16 bits.
> 
> What are your plans for this series? Can we merge this?

I was waiting for an ACK on patch (2) since it affects MIPS code.

It would also be great if Bjorn reviewed it to make sure he agrees
with the approach.

I think it is too late for this cycle, apologies, there is a significant
review backlog.

Lorenzo

> Best regards,
>     Sergio Paracuellos
> 
> >
> > Changes in v2:
> >  - Collect Acked-by from Arnd Bergmann for PATCH 1.
> >  - Collect Reviewed-by from Krzysztof Wilczyński for PATCH 4.
> >  - Adjust some patches commit subject and message as pointed out by Bjorn in review of v1 of the series[2].
> >
> > This patchset is the good way of properly compile driver as a module removing
> > all MIPS specific code into arch ralink mt7621 place. To avoid mips:allmodconfig reported
> > problems for v5.16 the following patch has been sent[3]. This series are rebased onto this patch to provide
> > a real fix for this problem.
> >
> > [0]: https://lore.kernel.org/linux-mips/CAMhs-H8ShoaYiFOOzJaGC68nZz=V365RXN_Kjuj=fPFENGJiiw@mail.gmail.com/T/#t
> > [1]: https://lkml.org/lkml/2021/11/14/436
> > [2]: https://lore.kernel.org/r/20211115070809.15529-1-sergio.paracuellos@gmail.com
> > [3]: https://lore.kernel.org/linux-pci/20211203192454.32624-1-sergio.paracuellos@gmail.com/T/#u
> >
> > Thanks in advance for your time.
> >
> > Best regards,
> >    Sergio Paracuellos
> >
> > Sergio Paracuellos (5):
> >   PCI: Let pcibios_root_bridge_prepare() access to 'bridge->windows'
> >   MIPS: ralink: implement 'pcibios_root_bridge_prepare()'
> >   PCI: mt7621: Avoid custom MIPS code in driver code
> >   PCI: mt7621: Add missing 'MODULE_LICENSE()' definition
> >   PCI: mt7621: Allow COMPILE_TEST for all arches
> >
> >  arch/mips/ralink/mt7621.c            | 31 ++++++++++++++++++++++
> >  drivers/pci/controller/Kconfig       |  4 +--
> >  drivers/pci/controller/pcie-mt7621.c | 39 ++--------------------------
> >  drivers/pci/probe.c                  |  4 +--
> >  4 files changed, 37 insertions(+), 41 deletions(-)
> >
> > --
> > 2.33.0
> >