[PATCH 09/17] ARM: dts: qcom: add saw for l2 cache and kraitcc for ipq8064

[Ansuel Smith <ansuelsmth@gmail.com>]

Add saw compatible for l2 cache and kraitcc node for ipq8064 dtsi.
Also declare clock-output-names for acc0 and acc1.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 8c2d4dac0ebd..a45e4c799b27 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -504,11 +504,13 @@ IRQ_TYPE_EDGE_RISING)>,
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu0_aux";
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu1_aux";
 		};
 
 		adm_dma: dma-controller@18300000 {
@@ -532,17 +534,23 @@ adm_dma: dma-controller@18300000 {
 		};
 
 		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
 		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
+		saw_l2: regulator@02012000 {
+			compatible = "qcom,saw2", "syscon";
+			reg = <0x02012000 0x1000>;
+			regulator;
+		};
+
 		gsbi2: gsbi@12480000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <2>;
@@ -885,6 +893,11 @@ l2cc: clock-controller@2011000 {
 			clock-output-names = "acpu_l2_aux";
 		};
 
+		kraitcc: clock-controller {
+			compatible = "qcom,krait-cc-v1";
+			#clock-cells = <1>;
+		};
+
 		lcc: clock-controller@28000000 {
 			compatible = "qcom,lcc-ipq8064";
 			reg = <0x28000000 0x1000>;
-- 
2.33.1