From: Hugo Villeneuve <hugo@hugovil.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: hugo@hugovil.com, Hugo Villeneuve <hvilleneuve@dimonoff.com>,
linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 01/10] rtc: pcf2127: add variant-specific configuration structure
Date: Tue, 25 Jan 2022 15:00:00 -0500 [thread overview]
Message-ID: <20220125200009.900660-2-hugo@hugovil.com> (raw)
In-Reply-To: <20220125200009.900660-1-hugo@hugovil.com>
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Create variant-specific configuration structures to simplify the
implementation of new variants into this driver. It will also avoid
to have too many tests for a specific variant, or a list of variants
for new devices, inside the code itself.
Add configuration options for the support of the NVMEM, bit CD0 in
register WD_CTL as well as the maximum number of registers for each
variant, instead of hardcoding the variant (PCF2127) inside the
i2c_device_id and spi_device_id structures.
Also specify a different maximum number of registers (max_register)
for the PCF2129.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
drivers/rtc/rtc-pcf2127.c | 96 +++++++++++++++++++++++++++++++--------
1 file changed, 78 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 81a5b1f2e68c..d2b335a64887 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/watchdog.h>
@@ -101,10 +102,17 @@
PCF2127_BIT_CTRL2_WDTF | \
PCF2127_BIT_CTRL2_TSF2)
+struct pcf21xx_config {
+ int max_register;
+ unsigned int has_nvmem:1;
+ unsigned int has_bit_wd_ctl_cd0:1;
+};
+
struct pcf2127 {
struct rtc_device *rtc;
struct watchdog_device wdd;
struct regmap *regmap;
+ const struct pcf21xx_config *cfg;
time64_t ts;
bool ts_valid;
bool irq_enabled;
@@ -630,8 +638,27 @@ static const struct attribute_group pcf2127_attr_group = {
.attrs = pcf2127_attrs,
};
+enum pcf21xx_type {
+ PCF2127,
+ PCF2129,
+ PCF21XX_LAST_ID
+};
+
+static struct pcf21xx_config pcf21xx_cfg[] = {
+ [PCF2127] = {
+ .max_register = 0x1d,
+ .has_nvmem = 1,
+ .has_bit_wd_ctl_cd0 = 1,
+ },
+ [PCF2129] = {
+ .max_register = 0x19,
+ .has_nvmem = 0,
+ .has_bit_wd_ctl_cd0 = 0,
+ },
+};
+
static int pcf2127_probe(struct device *dev, struct regmap *regmap,
- int alarm_irq, const char *name, bool is_pcf2127)
+ int alarm_irq, const char *name, const struct pcf21xx_config *config)
{
struct pcf2127 *pcf2127;
int ret = 0;
@@ -644,6 +671,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
return -ENOMEM;
pcf2127->regmap = regmap;
+ pcf2127->cfg = config;
dev_set_drvdata(dev, pcf2127);
@@ -675,7 +703,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
}
- if (is_pcf2127) {
+ if (pcf2127->cfg->has_nvmem) {
struct nvmem_config nvmem_cfg = {
.priv = pcf2127,
.reg_read = pcf2127_nvmem_read,
@@ -721,7 +749,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
PCF2127_BIT_WD_CTL_TF1 |
PCF2127_BIT_WD_CTL_TF0,
PCF2127_BIT_WD_CTL_CD1 |
- (is_pcf2127 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
+ (pcf2127->cfg->has_bit_wd_ctl_cd0 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
PCF2127_BIT_WD_CTL_TF1);
if (ret) {
dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__);
@@ -786,9 +814,9 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
#ifdef CONFIG_OF
static const struct of_device_id pcf2127_of_match[] = {
- { .compatible = "nxp,pcf2127" },
- { .compatible = "nxp,pcf2129" },
- { .compatible = "nxp,pca2129" },
+ { .compatible = "nxp,pcf2127", .data = &pcf21xx_cfg[PCF2127] },
+ { .compatible = "nxp,pcf2129", .data = &pcf21xx_cfg[PCF2129] },
+ { .compatible = "nxp,pca2129", .data = &pcf21xx_cfg[PCF2129] },
{}
};
MODULE_DEVICE_TABLE(of, pcf2127_of_match);
@@ -872,19 +900,36 @@ static const struct regmap_bus pcf2127_i2c_regmap = {
static struct i2c_driver pcf2127_i2c_driver;
+static const struct i2c_device_id pcf2127_i2c_id[];
+
static int pcf2127_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct regmap *regmap;
- static const struct regmap_config config = {
+ static struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = 0x1d,
};
+ const struct pcf21xx_config *variant;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
+ if (client->dev.of_node) {
+ variant = of_device_get_match_data(&client->dev);
+ if (!variant)
+ return -ENODEV;
+ } else {
+ enum pcf21xx_type type =
+ i2c_match_id(pcf2127_i2c_id, client)->driver_data;
+
+ if (type >= PCF21XX_LAST_ID)
+ return -ENODEV;
+ variant = &pcf21xx_cfg[type];
+ }
+
+ config.max_register = variant->max_register,
+
regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
&client->dev, &config);
if (IS_ERR(regmap)) {
@@ -894,13 +939,13 @@ static int pcf2127_i2c_probe(struct i2c_client *client,
}
return pcf2127_probe(&client->dev, regmap, client->irq,
- pcf2127_i2c_driver.driver.name, id->driver_data);
+ pcf2127_i2c_driver.driver.name, variant);
}
static const struct i2c_device_id pcf2127_i2c_id[] = {
- { "pcf2127", 1 },
- { "pcf2129", 0 },
- { "pca2129", 0 },
+ { "pcf2127", PCF2127 },
+ { "pcf2129", PCF2129 },
+ { "pca2129", PCF2129 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
@@ -940,17 +985,32 @@ static void pcf2127_i2c_unregister_driver(void)
#if IS_ENABLED(CONFIG_SPI_MASTER)
static struct spi_driver pcf2127_spi_driver;
+static const struct spi_device_id pcf2127_spi_id[];
static int pcf2127_spi_probe(struct spi_device *spi)
{
- static const struct regmap_config config = {
+ static struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
.read_flag_mask = 0xa0,
.write_flag_mask = 0x20,
- .max_register = 0x1d,
};
struct regmap *regmap;
+ const struct pcf21xx_config *variant;
+
+ if (spi->dev.of_node) {
+ variant = of_device_get_match_data(&spi->dev);
+ if (!variant)
+ return -ENODEV;
+ } else {
+ enum pcf21xx_type type = spi_get_device_id(spi)->driver_data;
+
+ if (type >= PCF21XX_LAST_ID)
+ return -ENODEV;
+ variant = &pcf21xx_cfg[type];
+ }
+
+ config.max_register = variant->max_register,
regmap = devm_regmap_init_spi(spi, &config);
if (IS_ERR(regmap)) {
@@ -961,13 +1021,13 @@ static int pcf2127_spi_probe(struct spi_device *spi)
return pcf2127_probe(&spi->dev, regmap, spi->irq,
pcf2127_spi_driver.driver.name,
- spi_get_device_id(spi)->driver_data);
+ variant);
}
static const struct spi_device_id pcf2127_spi_id[] = {
- { "pcf2127", 1 },
- { "pcf2129", 0 },
- { "pca2129", 0 },
+ { "pcf2127", PCF2127 },
+ { "pcf2129", PCF2129 },
+ { "pca2129", PCF2129 },
{ }
};
MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
--
2.30.2
next parent reply other threads:[~2022-01-25 20:00 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220125200009.900660-1-hugo@hugovil.com>
2022-01-25 20:00 ` Hugo Villeneuve [this message]
2022-01-25 20:00 ` [PATCH 02/10] rtc: pcf2127: adapt for time/date registers at any offset Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 03/10] rtc: pcf2127: adapt for alarm " Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 04/10] rtc: pcf2127: adapt for WD " Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 05/10] rtc: pcf2127: adapt for CLKOUT register " Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 06/10] rtc: pcf2127: add support for multiple TS functions Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 07/10] rtc: pcf2127: add support for PCF2131 RTC Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 08/10] rtc: pcf2127: add support for PCF2131 alarm interrupt on outputs INT_A/B Hugo Villeneuve
2022-01-25 20:00 ` [PATCH 09/10] dt-bindings: rtc: pcf2127: add PCF2131 Hugo Villeneuve
2022-02-09 3:23 ` Rob Herring
2022-01-25 20:00 ` [PATCH 10/10] dt-bindings: rtc: pcf2127: add PCF2131 INT_A and INT_B support Hugo Villeneuve
2022-02-09 3:20 ` Rob Herring
2022-02-10 22:12 ` Hugo Villeneuve
2022-02-10 22:32 ` Alexandre Belloni
2022-02-10 22:55 ` Hugo Villeneuve
2022-02-11 20:16 ` Hugo Villeneuve
2022-02-11 21:02 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125200009.900660-2-hugo@hugovil.com \
--to=hugo@hugovil.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=hvilleneuve@dimonoff.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox