From: Marc Zyngier <maz@kernel.org>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
kernel-team@android.com, Mark Rutland <mark.rutland@arm.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Subject: [PATCH] clocksource/drivers/arm_arch_timer: Use event stream scaling when available
Date: Thu, 3 Feb 2022 17:05:02 +0000 [thread overview]
Message-ID: <20220203170502.2694422-1-maz@kernel.org> (raw)
With FEAT_ECV and the 1GHz counter, it is pretty likely that the
event stream divider doesn't fit in the field that holds the
divider value (we only have 4 bits to describe counter bits [15:0]
Thankfully, FEAT_ECV also provides a scaling mechanism to switch
the field to cover counter bits [23:8] instead.
Enable this on arm64 when ECV is available (32bit doesn't have
any detection infrastructure and is unlikely to be run on an
ARMv8.6 system anyway).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 13 +++++++++++--
include/clocksource/arm_arch_timer.h | 1 +
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 1ecd52f903b8..9ab8221ee3c6 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -880,10 +880,19 @@ static void __arch_timer_setup(unsigned type,
clockevents_config_and_register(clk, arch_timer_rate, 0xf, max_delta);
}
-static void arch_timer_evtstrm_enable(int divider)
+static void arch_timer_evtstrm_enable(unsigned int divider)
{
u32 cntkctl = arch_timer_get_cntkctl();
+#ifdef CONFIG_ARM64
+ /* ECV is likely to require a large divider. Use the EVNTIS flag. */
+ if (cpus_have_const_cap(ARM64_HAS_ECV) && divider > 15) {
+ cntkctl |= ARCH_TIMER_EVT_INTERVAL_SCALE;
+ divider -= 8;
+ }
+#endif
+
+ divider = min(divider, 15U);
cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
/* Set the divider and enable virtual event stream */
cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
@@ -912,7 +921,7 @@ static void arch_timer_configure_evtstream(void)
lsb++;
/* enable event stream */
- arch_timer_evtstrm_enable(max(0, min(lsb, 15)));
+ arch_timer_evtstrm_enable(max(0, lsb));
}
static void arch_counter_set_user_access(void)
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index e715bdb720d5..057c8964aefb 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -56,6 +56,7 @@ enum arch_timer_spi_nr {
#define ARCH_TIMER_EVT_TRIGGER_MASK (0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT)
#define ARCH_TIMER_USR_VT_ACCESS_EN (1 << 8) /* virtual timer registers */
#define ARCH_TIMER_USR_PT_ACCESS_EN (1 << 9) /* physical timer registers */
+#define ARCH_TIMER_EVT_INTERVAL_SCALE (1 << 17) /* EVNTIS in the ARMv8 ARM */
#define ARCH_TIMER_EVT_STREAM_PERIOD_US 100
#define ARCH_TIMER_EVT_STREAM_FREQ \
--
2.34.1
next reply other threads:[~2022-02-03 17:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-03 17:05 Marc Zyngier [this message]
2022-02-25 17:12 ` [PATCH] clocksource/drivers/arm_arch_timer: Use event stream scaling when available Mark Rutland
2022-03-01 21:14 ` Daniel Lezcano
2022-03-14 9:28 ` [tip: timers/core] " tip-bot2 for Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220203170502.2694422-1-maz@kernel.org \
--to=maz@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=kernel-team@android.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox