From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Michael Stapelberg <michael+drm@stapelberg.ch>,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH 5.10 12/25] drm/vc4: hdmi: Make sure the device is powered with CEC
Date: Fri, 4 Feb 2022 10:20:19 +0100 [thread overview]
Message-ID: <20220204091914.688259001@linuxfoundation.org> (raw)
In-Reply-To: <20220204091914.280602669@linuxfoundation.org>
From: Maxime Ripard <maxime@cerno.tech>
Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.
The original commit depended on a rework commit (724fc856c09e ("drm/vc4:
hdmi: Split the CEC disable / enable functions in two")) that
(rightfully) didn't reach stable.
However, probably because the context changed, when the patch was
applied to stable the pm_runtime_put called got moved to the end of the
vc4_hdmi_cec_adap_enable function (that would have become
vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init.
This means that at probe time, we now drop our reference to the clocks
and power domains and thus end up with a CPU hang when the CPU tries to
access registers.
The call to pm_runtime_resume_and_get() is also problematic since the
.adap_enable CEC hook is called both to enable and to disable the
controller. That means that we'll now call pm_runtime_resume_and_get()
at disable time as well, messing with the reference counting.
The behaviour we should have though would be to have
pm_runtime_resume_and_get() called when the CEC controller is enabled,
and pm_runtime_put when it's disabled.
We need to move things around a bit to behave that way, but it aligns
stable with upstream.
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: <stable@vger.kernel.org> # 5.15.x
Cc: <stable@vger.kernel.org> # 5.16.x
Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1402,18 +1402,18 @@ static int vc4_hdmi_cec_adap_enable(stru
u32 val;
int ret;
- ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
- if (ret)
- return ret;
-
- val = HDMI_READ(HDMI_CEC_CNTRL_5);
- val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
- VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
- VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
- val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
- ((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
-
if (enable) {
+ ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+ if (ret)
+ return ret;
+
+ val = HDMI_READ(HDMI_CEC_CNTRL_5);
+ val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
+ VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
+ VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
+ val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
+ ((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
+
HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
HDMI_WRITE(HDMI_CEC_CNTRL_5, val);
@@ -1439,7 +1439,10 @@ static int vc4_hdmi_cec_adap_enable(stru
HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
+
+ pm_runtime_put(&vc4_hdmi->pdev->dev);
}
+
return 0;
}
@@ -1531,8 +1534,6 @@ static int vc4_hdmi_cec_init(struct vc4_
if (ret < 0)
goto err_delete_cec_adap;
- pm_runtime_put(&vc4_hdmi->pdev->dev);
-
return 0;
err_delete_cec_adap:
next prev parent reply other threads:[~2022-02-04 9:21 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 9:20 [PATCH 5.10 00/25] 5.10.97-rc1 review Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 01/25] PCI: pciehp: Fix infinite loop in IRQ handler upon power fault Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 02/25] net: ipa: fix atomic update in ipa_endpoint_replenish() Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 03/25] net: ipa: use a bitmap for endpoint replenish_enabled Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 04/25] net: ipa: prevent concurrent replenish Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 05/25] Revert "drivers: bus: simple-pm-bus: Add support for probing simple bus only devices" Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 06/25] KVM: x86: Forcibly leave nested virt when SMM state is toggled Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 07/25] psi: Fix uaf issue when psi trigger is destroyed while being polled Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 08/25] perf: Rework perf_event_exit_event() Greg Kroah-Hartman
2022-02-04 9:37 ` Pavel Machek
2022-02-04 9:40 ` Greg Kroah-Hartman
2022-02-04 10:12 ` Pavel Machek
2022-02-05 10:25 ` Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 09/25] perf/core: Fix cgroup event list management Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 10/25] x86/mce: Add Xeon Sapphire Rapids to list of CPUs that support PPIN Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 11/25] x86/cpu: Add Xeon Icelake-D " Greg Kroah-Hartman
2022-02-04 9:20 ` Greg Kroah-Hartman [this message]
2022-02-05 11:40 ` [PATCH 5.10 12/25] drm/vc4: hdmi: Make sure the device is powered with CEC Alexey Khoroshilov
2022-02-05 11:53 ` Greg Kroah-Hartman
2022-02-05 12:04 ` Alexey Khoroshilov
2022-02-04 9:20 ` [PATCH 5.10 13/25] cgroup-v1: Require capabilities to set release_agent Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 14/25] net/mlx5e: Fix handling of wrong devices during bond netevent Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 15/25] net/mlx5: Use del_timer_sync in fw reset flow of halting poll Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 16/25] net/mlx5: E-Switch, Fix uninitialized variable modact Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 17/25] ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 18/25] net: amd-xgbe: ensure to reset the tx_timer_active flag Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 19/25] net: amd-xgbe: Fix skb data length underflow Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 20/25] fanotify: Fix stale file descriptor in copy_event_to_user() Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 21/25] net: sched: fix use-after-free in tc_new_tfilter() Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 22/25] rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 23/25] cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask() Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 24/25] af_packet: fix data-race in packet_setsockopt / packet_setsockopt Greg Kroah-Hartman
2022-02-04 9:20 ` [PATCH 5.10 25/25] tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() Greg Kroah-Hartman
2022-02-04 11:31 ` [PATCH 5.10 00/25] 5.10.97-rc1 review Pavel Machek
2022-02-04 17:33 ` Florian Fainelli
2022-02-04 19:11 ` Fox Chen
2022-02-04 20:32 ` Shuah Khan
2022-02-04 21:08 ` Guenter Roeck
2022-02-04 23:30 ` Slade Watkins
2022-02-05 7:01 ` Naresh Kamboju
2022-02-05 14:30 ` Sudip Mukherjee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220204091914.688259001@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime@cerno.tech \
--cc=michael+drm@stapelberg.ch \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox