[PATCH 5.15 16/32] net/mlx5e: Fix module EEPROM query

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Gal Pressman <gal@nvidia.com>

commit 4a08a131351e375a2969b98e46df260ed04dcba7 upstream.

When querying the module EEPROM, there was a misusage of the 'offset'
variable vs the 'query.offset' field.
Fix that by always using 'offset' and assigning its value to
'query.offset' right before the mcia register read call.

While at it, the cross-pages read size adjustment was changed to be more
intuitive.

Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/port.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -406,23 +406,24 @@ int mlx5_query_module_eeprom(struct mlx5
 
 	switch (module_id) {
 	case MLX5_MODULE_ID_SFP:
-		mlx5_sfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset);
+		mlx5_sfp_eeprom_params_set(&query.i2c_address, &query.page, &offset);
 		break;
 	case MLX5_MODULE_ID_QSFP:
 	case MLX5_MODULE_ID_QSFP_PLUS:
 	case MLX5_MODULE_ID_QSFP28:
-		mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset);
+		mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &offset);
 		break;
 	default:
 		mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
 		return -EINVAL;
 	}
 
-	if (query.offset + size > MLX5_EEPROM_PAGE_LENGTH)
+	if (offset + size > MLX5_EEPROM_PAGE_LENGTH)
 		/* Cross pages read, read until offset 256 in low page */
-		size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
+		size = MLX5_EEPROM_PAGE_LENGTH - offset;
 
 	query.size = size;
+	query.offset = offset;
 
 	return mlx5_query_mcia(dev, &query, data);
 }