Re: [PATCH 1/2] remoteproc: Introduce deny_sysfs_ops flag

Mathieu Poirier
2022-02-04T17:03:50Z

On Fri, Feb 04, 2022 at 01:40:23AM +0530, Puranjay Mohan wrote:
> Hi Mathieu,
>
> On Fri, Feb 4, 2022 at 12:07 AM Mathieu Poirier
> <mathieu.poirier@linaro.org> wrote:
> >
> > Hi Puranjay,
> >
> > On Mon, Jan 31, 2022 at 07:41:51PM +0530, Puranjay Mohan wrote:
> > > The remoteproc framework provides sysfs interfaces for changing
> > > the firmware name and for starting/stopping a remote processor
> > > through the sysfs files 'state' and 'firmware'. The 'recovery'
> > > sysfs file can also be used similarly to control the error recovery
> > > state machine of a remoteproc. These interfaces are currently
> > > allowed irrespective of how the remoteprocs were booted (like
> > > remoteproc self auto-boot, remoteproc client-driven boot etc).
> > > These interfaces can adversely affect a remoteproc and its clients
> > > especially when a remoteproc is being controlled by a remoteproc
> > > client driver(s). Also, not all remoteproc drivers may want to
> > > support the sysfs interfaces by default.
> > >
> > > Add support to deny the sysfs state/firmware/recovery change by
> > > introducing a state flag 'deny_sysfs_ops' that the individual
> > > remoteproc drivers can set based on their usage needs. The default
> > > behavior is to allow the sysfs operations as before.
> > >
> > > Implement attribute_group->is_visible() to hide the sysfs
> > > state/firmware/recovery entries when deny_sysfs_ops flag is set.
> > >
> >
> > The address in the "To:" field of this email doesn't match the one in the SoB,
> > Something that makes checkpatch angry.
>
> I will try to figure this out.
>
> >
> > > Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
> > > ---
> > > drivers/remoteproc/remoteproc_sysfs.c | 18 +++++++++++++++++-
> > > include/linux/remoteproc.h | 2 ++
> > > 2 files changed, 19 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
> > > index ea8b89f97d7b..4a41abdd1f7b 100644
> > > --- a/drivers/remoteproc/remoteproc_sysfs.c
> > > +++ b/drivers/remoteproc/remoteproc_sysfs.c
> > > @@ -230,6 +230,21 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
> > > }
> > > static DEVICE_ATTR_RO(name);
> > >
> > > +static umode_t rproc_is_visible(struct kobject *kobj, struct attribute *attr,
> > > + int n)
> > > +{
> > > + struct device *dev = kobj_to_dev(kobj);
> > > + struct rproc *rproc = to_rproc(dev);
> > > + umode_t mode = attr->mode;
> > > +
> > > + if (rproc->deny_sysfs_ops && (attr == &dev_attr_recovery.attr ||
> > > + attr == &dev_attr_firmware.attr ||
> > > + attr == &dev_attr_state.attr))
> >
> > I toyed with this solution for a little while. I think the use case is valid
> > but hiding the above options will also result in a system that is difficult to
> > use (and debug) because they convey important information.
>
> I feel most use cases will require it to be read-only and not hidden,
> so, we can set mode = 0444 in place of mode = 0 below.

Perfect.

> It will make these files read-only without the extra code.

I haven't looked the specifics but even better if that is the case.

> Actually, the idea to implement is_visble() was given by Bjorn in a
> reply to the patch in the previous series[1].
>

I missed Bjorn's reply, which can happen given the high traffic on this mailing
list. And having different views on how to address problems is a good thing.
It gives us an opportunity to discuss different avenues and pick out the best
one.

> >
> > I suggest introducing a new kernel configuration options to make the attributes
>
> We want to do it dynamically and on a per driver basis, hence,
> implementing is_visble() would be apt, which can be controlled by the
> specific driver using the deny_sysfs_ops flag.

I agree that if you need that kind of granularity then a kernel configuration
option is not the right approach.

>
> > of the rproc_devgroup return -EINVAL when it is set. So in remoteproc_sysfs.c
> > do something like:
> >
> > #if CONFIG_REMOTEPROC_SYSFS_RO
> > static bool option_is_read_only()
> > {
> > return true;
> > }
> > #else
> > static bool option_is_read_only()
> > {
> > return false;
> > }
> > #endif
> >
> > [...]
> >
> > static ssize_t recovery_store(struct device *dev,
> > struct device_attribute *attr,
> > const char *buf, size_t count)
> > {
> > struct rproc *rproc = to_rproc(dev);
> >
> > if (option_is_read_only())
> > return -EINVAL;
> >
> > if (sysfs_streq(buf, "enabled")) {
> > /* change the flag and begin the recovery process if needed */
> > rproc->recovery_disabled = false;
> > rproc_trigger_recovery(rproc);
> > } else if (sysfs_streq(buf, "disabled")) {
> > rproc->recovery_disabled = true;
> > } else if (sysfs_streq(buf, "recover")) {
> > /* begin the recovery process without changing the flag */
> > rproc_trigger_recovery(rproc);
> > } else {
> > return -EINVAL;
> > }
> >
> > return count;
> > }
> >
> > Thanks,
> > Mathieu
> >
> > > + mode = 0;
>
> ^^ here we can put mode = 0444; for read-only.
>
> > > +
> > > + return mode;
> > > +}
> > > +
> > > static struct attribute *rproc_attrs[] = {
> > > &dev_attr_coredump.attr,
> > > &dev_attr_recovery.attr,
> > > @@ -240,7 +255,8 @@ static struct attribute *rproc_attrs[] = {
> > > };
> > >
> > > static const struct attribute_group rproc_devgroup = {
> > > - .attrs = rproc_attrs
> > > + .attrs = rproc_attrs,
> > > + .is_visible = rproc_is_visible,
> > > };
> > >
> > > static const struct attribute_group *rproc_devgroups[] = {
> > > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> > > index e0600e1e5c17..3849c66ce38f 100644
> > > --- a/include/linux/remoteproc.h
> > > +++ b/include/linux/remoteproc.h
> > > @@ -523,6 +523,7 @@ struct rproc_dump_segment {
> > > * @table_sz: size of @cached_table
> > > * @has_iommu: flag to indicate if remote processor is behind an MMU
> > > * @auto_boot: flag to indicate if remote processor should be auto-started
> > > + * @deny_sysfs_ops: flag to not permit sysfs operations on state, firmware and recovery
> > > * @dump_segments: list of segments in the firmware
> > > * @nb_vdev: number of vdev currently handled by rproc
> > > * @elf_class: firmware ELF class
> > > @@ -562,6 +563,7 @@ struct rproc {
> > > size_t table_sz;
> > > bool has_iommu;
> > > bool auto_boot;
> > > + bool deny_sysfs_ops;
> > > struct list_head dump_segments;
> > > int nb_vdev;
> > > u8 elf_class;
> > > --
> > > 2.24.3
> > >
>
> [1] https://patchwork.kernel.org/project/linux-remoteproc/patch/20201121030156.22857-3-s-anna@ti.com/
>
> Thanks,
> Puranjay Mohan