From: "Paul E. McKenney" <paulmck@kernel.org>
To: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel-team@fb.com,
rostedt@goodmis.org, "Paul E. McKenney" <paulmck@kernel.org>
Subject: [PATCH rcu 06/19] srcu: Add size-state transitioning code
Date: Fri, 4 Feb 2022 15:38:49 -0800 [thread overview]
Message-ID: <20220204233902.1902-6-paulmck@kernel.org> (raw)
In-Reply-To: <20220204233858.GA1469@paulmck-ThinkPad-P17-Gen-1>
This is just dead code at the moment, but it serves to prevent
spurious compiler warnings about init_srcu_struct_nodes() being unused.
This function will once again be used once the state-transition code
is activated.
Because srcu_barrier() must be aware of transition before call_srcu(), the
state machine waits for an SRCU grace period before callbacks are queued
to the non-CPU-0 queues. This requres that portions of srcu_barrier()
be enclosed in an SRCU read-side critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
kernel/rcu/srcutree.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index 2bbe8a5d9ae86..fce041b648ee3 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -202,7 +202,6 @@ static int init_srcu_struct_fields(struct srcu_struct *ssp, bool is_static)
if (!ssp->sda)
return -ENOMEM;
init_srcu_struct_data(ssp);
- WARN_ON_ONCE(!init_srcu_struct_nodes(ssp));
ssp->srcu_gp_seq_needed_exp = 0;
ssp->srcu_last_gp_end = ktime_get_mono_fast_ns();
smp_store_release(&ssp->srcu_gp_seq_needed, 0); /* Init done. */
@@ -555,6 +554,7 @@ static void srcu_gp_end(struct srcu_struct *ssp)
unsigned long mask;
struct srcu_data *sdp;
struct srcu_node *snp;
+ int ss_state;
/* Prevent more than one additional grace period. */
mutex_lock(&ssp->srcu_cb_mutex);
@@ -622,6 +622,15 @@ static void srcu_gp_end(struct srcu_struct *ssp)
} else {
spin_unlock_irq_rcu_node(ssp);
}
+
+ /* Transition to big if needed. */
+ ss_state = smp_load_acquire(&ssp->srcu_size_state);
+ if (ss_state && ss_state != SRCU_SIZE_BIG) {
+ if (ss_state == SRCU_SIZE_ALLOC)
+ init_srcu_struct_nodes(ssp);
+ else
+ smp_store_release(&ssp->srcu_size_state, ss_state + 1);
+ }
}
/*
@@ -1172,6 +1181,7 @@ static void srcu_barrier_one_cpu(struct srcu_struct *ssp, struct srcu_data *sdp)
void srcu_barrier(struct srcu_struct *ssp)
{
int cpu;
+ int idx;
unsigned long s = rcu_seq_snap(&ssp->srcu_barrier_seq);
check_init_srcu_struct(ssp);
@@ -1187,11 +1197,13 @@ void srcu_barrier(struct srcu_struct *ssp)
/* Initial count prevents reaching zero until all CBs are posted. */
atomic_set(&ssp->srcu_barrier_cpu_cnt, 1);
+ idx = srcu_read_lock(ssp);
if (smp_load_acquire(&ssp->srcu_size_state) < SRCU_SIZE_WAIT_BARRIER)
srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, 0));
else
for_each_possible_cpu(cpu)
srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, cpu));
+ srcu_read_unlock(ssp, idx);
/* Remove the initial count, at which point reaching zero can happen. */
if (atomic_dec_and_test(&ssp->srcu_barrier_cpu_cnt))
--
2.31.1.189.g2e36527f23
next prev parent reply other threads:[~2022-02-04 23:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 23:38 [PATCH rcu 0/19] SRCU updates for v5.18 Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 01/19] srcu: Tighten cleanup_srcu_struct() GP checks Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 02/19] srcu: Fix s/is/if/ typo in srcu_node comment Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 03/19] srcu: Make srcu_funnel_gp_start() cache ->mynode in snp_leaf Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 04/19] srcu: Dynamically allocate srcu_node array Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 05/19] srcu: Make Tree SRCU able to operate without snp_node array Paul E. McKenney
2022-02-04 23:38 ` Paul E. McKenney [this message]
2022-02-04 23:38 ` [PATCH rcu 07/19] srcu: Make rcutorture dump the SRCU size state Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 08/19] srcu: Add boot-time control over srcu_node array allocation Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 09/19] srcu: Use export for srcu_struct defined by DEFINE_STATIC_SRCU() Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 10/19] srcu: Compute snp_seq earlier in srcu_funnel_gp_start() Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 11/19] srcu: Use invalid initial value for srcu_node GP sequence numbers Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 12/19] srcu: Avoid NULL dereference in srcu_torture_stats_print() Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 13/19] srcu: Prevent cleanup_srcu_struct() from freeing non-dynamic ->sda Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 14/19] srcu: Explain srcu_funnel_gp_start() call to list_add() is safe Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 15/19] srcu: Create concurrency-safe helper for initiating size transition Paul E. McKenney
2022-02-04 23:38 ` [PATCH rcu 16/19] srcu: Add contention-triggered addition of srcu_node tree Paul E. McKenney
2022-02-04 23:39 ` [PATCH rcu 17/19] srcu: Make srcu_size_state_name static Paul E. McKenney
2022-02-04 23:39 ` [PATCH rcu 18/19] srcu: Automatically determine size-transition strategy at boot Paul E. McKenney
2022-02-04 23:39 ` [PATCH rcu 19/19] srcu: Add contention check to call_srcu() srcu_data ->lock acquisition Paul E. McKenney
[not found] ` <20220205030303.2408-1-hdanton@sina.com>
2022-02-05 5:20 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220204233902.1902-6-paulmck@kernel.org \
--to=paulmck@kernel.org \
--cc=kernel-team@fb.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox