From: "Marek Behún" <kabel@kernel.org>
To: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Gregory Clement <gregory.clement@bootlin.com>
Cc: "Pali Rohár" <pali@kernel.org>,
linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH v8 0/6] serial: mvebu-uart: Support for higher baudrates
Date: Fri, 11 Feb 2022 20:12:32 +0100 [thread overview]
Message-ID: <20220211191238.2142-1-kabel@kernel.org> (raw)
Hello Greg, Stephen, Gregory,
at Pali's request I have reviewed, updated and tested his series adding
support for higher baudrates on Marvell Armada A37xx boards.
I have updated commit messages, some comments and indentation at some
places. As per Stephen Boyd's request, commit message of patch 3 now
contains more information about why we need to have UART
clock-controller binding defined in such a way (due to backwards
compatibility).
Marek
Changes in v7:
* fixed lint errors in yaml binding file
* added Reviewed-by tags
* changed commit messages and comments a little
* fixed indentation at some places
* swapped patch 2 and 3 (dt-binding defining new binding should go
before the driver adding usage of that new binding)
Changes in v6:
* fixed yaml binding file and dts files
Changes in v5:
* fixed yaml binding file
Changes in v4:
* converted armada3700-uart-clock documentation to YAML
* split documentation changes into two commits:
- first which adds clock documentation
- second which updates UART documentation
Changes in v3:
v3 is rebased on top of Linus master branch and all already applied patches
were dropped. There are no changes in patches itself since v2.
Pali Rohár (6):
math64: New DIV_U64_ROUND_CLOSEST helper
dt-bindings: mvebu-uart: document DT bindings for
marvell,armada-3700-uart-clock
serial: mvebu-uart: implement UART clock driver for configuring UART
base clock
dt-bindings: mvebu-uart: update information about UART clock
arm64: dts: marvell: armada-37xx: add device node for UART clock and
use it
serial: mvebu-uart: implement support for baudrates higher than 230400
Bd
.../clock/marvell,armada-3700-uart-clock.yaml | 59 ++
.../devicetree/bindings/serial/mvebu-uart.txt | 9 +-
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 +-
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/mvebu-uart.c | 596 +++++++++++++++++-
include/linux/math64.h | 13 +
6 files changed, 671 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
--
2.34.1
next reply other threads:[~2022-02-11 19:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 19:12 Marek Behún [this message]
2022-02-11 19:12 ` [PATCH v8 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Marek Behún
2022-02-11 19:12 ` [PATCH v8 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Marek Behún
2022-02-11 19:12 ` [PATCH v8 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Marek Behún
2022-02-13 21:36 ` Marek Behún
2022-02-11 19:12 ` [PATCH v8 4/6] dt-bindings: mvebu-uart: update information about UART clock Marek Behún
2022-02-11 19:12 ` [PATCH v8 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Marek Behún
2022-02-14 15:46 ` Gregory CLEMENT
2022-02-11 19:12 ` [PATCH v8 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Bd Marek Behún
2022-02-19 15:26 ` [PATCH v8 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220211191238.2142-1-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pali@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox