From: Shawn Guo <shawnguo@kernel.org>
To: Yunus Bas <y.bas@phytec.de>
Cc: robh+dt@kernel.org, krzysztof.kozlowski@canonical.com,
devicetree@vger.kernel.org, festevam@gmail.com,
s.hauer@pengutronix.de, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 2/2] ARM: dts: imx6qdl: phycore-som: Add custom volt/freq table
Date: Sun, 13 Feb 2022 12:23:49 +0800 [thread overview]
Message-ID: <20220213042348.GM4909@dragon> (raw)
In-Reply-To: <20220209223258.1672425-2-y.bas@phytec.de>
On Wed, Feb 09, 2022 at 11:32:58PM +0100, Yunus Bas wrote:
> The PHYTEC phyCORE-i.MX6QDL SOM-modules are operating with a slightly
> different voltage and frequency values in contrast to the generic
> i.MX6Q/DL tables. The values have been adjusted to achieve the most
> stable condition for the PHYTEC-modules. Introduce imx6q- and
> imx6dl-phycore dtsi files with the modified power tables.
>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
> .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 2 +-
> .../boot/dts/imx6dl-phytec-phycore-som.dtsi | 25 ++++++
> .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 2 +-
> .../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 2 +-
> .../boot/dts/imx6q-phytec-phycore-som.dtsi | 83 +++++++++++++++++++
> 5 files changed, 111 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi
> create mode 100644 arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> index d906a7f05aaa..8ec27080ca1e 100644
> --- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> @@ -6,7 +6,7 @@
>
> /dts-v1/;
> #include "imx6dl.dtsi"
> -#include "imx6qdl-phytec-phycore-som.dtsi"
> +#include "imx6dl-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> #include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> diff --git a/arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi
> new file mode 100644
> index 000000000000..0985453b5ad6
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2021 PHYTEC Messtechnik GmbH
> + * Author: Yunus Bas <y.bas@phytec.de>
> + */
> +
> +#include "imx6qdl-phytec-phycore-som.dtsi"
> +
> +&cpu0 {
> + operating-points = <
> + /* kHz uV */
> + 996000 1275000
> + 792000 1175000
> + 396000 1150000
> + >;
Check Documentation/devicetree/bindings/opp/opp-v1.yaml to see how this
property should be coded properly.
Shawn
> +};
> +
> +&cpu1 {
> + operating-points = <
> + /* kHz uV */
> + 996000 1275000
> + 792000 1175000
> + 396000 1150000
> + >;
> +};
> diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> index 322f071d972f..7d947762f3b9 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> @@ -6,7 +6,7 @@
>
> /dts-v1/;
> #include "imx6q.dtsi"
> -#include "imx6qdl-phytec-phycore-som.dtsi"
> +#include "imx6q-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> #include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> index 3f13726c8058..afbb6681a6b5 100644
> --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> @@ -6,7 +6,7 @@
>
> /dts-v1/;
> #include "imx6q.dtsi"
> -#include "imx6qdl-phytec-phycore-som.dtsi"
> +#include "imx6q-phytec-phycore-som.dtsi"
> #include "imx6qdl-phytec-mira.dtsi"
> #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> #include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> diff --git a/arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi
> new file mode 100644
> index 000000000000..3ecb94379c8b
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2021 PHYTEC Messtechnik GmbH
> + * Author: Yunus Bas <y.bas@phytec.de>
> + */
> +
> +#include "imx6qdl-phytec-phycore-som.dtsi"
> +
> +&cpu0 {
> + operating-points = <
> + /* KHz uV */
> + 1200000 1300000
> + 996000 1250000
> + 852000 1250000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 1200000 1275000
> + 996000 1250000
> + 852000 1250000
> + 792000 1250000
> + 396000 1250000
> + >;
> +};
> +
> +&cpu1 {
> + operating-points = <
> + /* KHz uV */
> + 1200000 1300000
> + 996000 1250000
> + 852000 1250000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 1200000 1275000
> + 996000 1250000
> + 852000 1250000
> + 792000 1250000
> + 396000 1250000
> + >;
> +};
> +
> +&cpu2 {
> + operating-points = <
> + /* KHz uV */
> + 1200000 1300000
> + 996000 1250000
> + 852000 1250000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 1200000 1275000
> + 996000 1250000
> + 852000 1250000
> + 792000 1250000
> + 396000 1250000
> + >;
> +};
> +
> +&cpu3 {
> + operating-points = <
> + /* KHz uV */
> + 1200000 1300000
> + 996000 1250000
> + 852000 1250000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 1200000 1275000
> + 996000 1250000
> + 852000 1250000
> + 792000 1250000
> + 396000 1250000
> + >;
> +};
> --
> 2.25.1
>
prev parent reply other threads:[~2022-02-13 4:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 22:32 [PATCH RESEND 1/2] ARM: dts: imx6dl: Add a label to cpu1 node Yunus Bas
2022-02-09 22:32 ` [PATCH RESEND 2/2] ARM: dts: imx6qdl: phycore-som: Add custom volt/freq table Yunus Bas
2022-02-13 4:23 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220213042348.GM4909@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=y.bas@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox