linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: Re: [PATCH v1 1/1] iio: ssp_sensors: Make use of device properties
Date: Sun, 13 Feb 2022 17:52:07 +0000	[thread overview]
Message-ID: <20220213175207.143e5767@jic23-huawei> (raw)
In-Reply-To: <20220210135724.26660-1-andriy.shevchenko@linux.intel.com>

On Thu, 10 Feb 2022 15:57:24 +0200
Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:

> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Applied to the togreg branch of iio.git and pushed out as testing.

Thanks,

Jonathan

> ---
>  drivers/iio/common/ssp_sensors/ssp_dev.c | 22 +++++-----------------
>  1 file changed, 5 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
> index eafaf4529df5..c1abd20ff808 100644
> --- a/drivers/iio/common/ssp_sensors/ssp_dev.c
> +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
> @@ -7,9 +7,10 @@
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
>  #include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/of_platform.h>
> +#include <linux/property.h>
> +
>  #include "ssp.h"
>  
>  #define SSP_WDT_TIME			10000
> @@ -425,7 +426,6 @@ int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay)
>  				  msecs_to_jiffies(delay));
>  }
>  
> -#ifdef CONFIG_OF
>  static const struct of_device_id ssp_of_match[] = {
>  	{
>  		.compatible	= "samsung,sensorhub-rinato",
> @@ -441,8 +441,6 @@ MODULE_DEVICE_TABLE(of, ssp_of_match);
>  static struct ssp_data *ssp_parse_dt(struct device *dev)
>  {
>  	struct ssp_data *data;
> -	struct device_node *node = dev->of_node;
> -	const struct of_device_id *match;
>  
>  	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>  	if (!data)
> @@ -461,22 +459,12 @@ static struct ssp_data *ssp_parse_dt(struct device *dev)
>  	if (IS_ERR(data->mcu_reset_gpiod))
>  		return NULL;
>  
> -	match = of_match_node(ssp_of_match, node);
> -	if (!match)
> -		return NULL;
> -
> -	data->sensorhub_info = match->data;
> +	data->sensorhub_info = device_get_match_data(dev);
>  
>  	dev_set_drvdata(dev, data);
>  
>  	return data;
>  }
> -#else
> -static struct ssp_data *ssp_parse_dt(struct device *pdev)
> -{
> -	return NULL;
> -}
> -#endif
>  
>  /**
>   * ssp_register_consumer() - registers iio consumer in ssp framework
> @@ -670,7 +658,7 @@ static struct spi_driver ssp_driver = {
>  	.remove = ssp_remove,
>  	.driver = {
>  		.pm = &ssp_pm_ops,
> -		.of_match_table = of_match_ptr(ssp_of_match),
> +		.of_match_table = ssp_of_match,
>  		.name = "sensorhub"
>  	},
>  };


      reply	other threads:[~2022-02-13 17:45 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-10 13:57 [PATCH v1 1/1] iio: ssp_sensors: Make use of device properties Andy Shevchenko
2022-02-13 17:52 ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220213175207.143e5767@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).